Syndicate content 0  
 

Hey Community!

We're happy to share the next video in the series dedicated to Gen AI on our InterSystems Developers YouTube:

⏯ Energy Consumption for AI

https://www.youtube.com/embed/o99hGFoCeuU
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

2 0
0 149

Our target system requires a blank ROL segment whenever the ROL segment does not exist in an A08 from our source system. I'm not sure if this can be done with the DTL gui tools or if some sql or other code is required (coding is not in my wheelhouse). Here is what I've tried, but this does not yield the "ROL|1|" I'd like to create. Any help would be greatly appreciated.

Here is the input message that I'd like to add the ROL segment to:

1 5
0 144

Hey, So the title pretty much describes the question:
Where and How can i see the Stream that contains the response back to the client of a CSP application.

When the request is being processed and finished we return a response to the client - We do that by writing the data to a stream and that stream is sent back to the client.
I wanted to know how i can access the point right before that Data is actually written to the client back (meaning the place where the response is actually being send back, the last point of contact).

0 9
0 140

It's not supported at the moment but is it possible to implement the Sonatype Nexus (or JFrog Artifactory) support based on the current (or upcoming) IPM version?

In repo command help I see there is a support for filesystem repositories (which I have not yet tried) and my current (hopefully not far-fetched) interpretation is the IPM is designed to be able to support different repositories:

0 5
0 143
Article
· May 2 3m read
Minify XML in IRIS

In a project I'm working on we need to store some arbitrary XML in the database. This XML does not have any corresponding class in IRIS, we just need to store it as a string (it's relatively small and can fit in a string).
Since there are MANY (millions!) of records in the database I decided to reduce as much as possible the size without compressing. I know that some XML to be stored is indented, some not, it varies.

3 3
1 87

Hey Community,

Recently, @Dean Andrews, Head of Developer Relations, sat down with Instruqt to share how InterSystems is transforming developer engagement:

>> Unlocking Hands-On Learning with Instruqt <<

“Instruqt is useful for interactive tutorials where we are sharing specific use cases of our technology with our customers, partners and developers around the world... It's such a powerful way to show our customers and partners how easy InterSystems technology is to use.” - Dean Andrews

https://www.youtube.com/embed/3w5psZdZYjA
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

1 0
0 147

Hello everyone! This is my first post into the developer community and one that I hope is fairly simple to answer. In our environment we currently have 3 different Test environments for testing before migrating code to our Prod environment. Currently we are working on establishing a source control method using Git in house which has been a bit of a struggle. We have also had developers that had used different test and migration methods in the past which has caused some issues with keeping the different test environment in sync.

0 7
0 140

I'm having an issue with sending SMTP requests from a specific Microsoft 365 account to Gmail accounts. We can use other Microsoft 365 accounts, but something about this one specific account sending to Gmail fails. The error we get is just telling us that sending to the user xxxxx@gmail.com failed. In order to troubleshoot that, I'm looking for more detail than that.

1 4
0 143

I hit halt in Iris lite terminal within VS Code and was exited out to PS prompt. I was just curious what the best way / recommended way to get back into an InterSystems lite terminal would be? Perhaps it is just to start a new InterSystems lite terminal from a the options listed previously in this post https://community.intersystems.com/post/how-run-objectscript-commands-vs.... I was just curious if there was a way to kick it off again from the PS prompt?

0 2
0 145

Been testing out the Production Validator toolkit, just to see what we can/not do with it. Seems really interesting and there seem to be some use cases for it that can really streamline some upgrades (or at least parts of upgrades) but I was running into so many hurdles with the documentation. I am curious if anyone else has used it.

2 6
0 140

Hey Community!

Check out the new video dedicated to Gen AI on our InterSystems Developers YouTube:

⏯ Healthcare Use-Case: Patient Portal Messages

https://www.youtube.com/embed/z6lNuZSZ9mg
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

0 0
0 146

Hey Community,

Watch the new video on InterSystems Developers YouTube:

⏯ Securing AI Implementations - Moving from Experimentation to Production @ Global Summit 2024

https://www.youtube.com/embed/HZn4jazdowY
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

1 2
1 106

I have an operation using $ZF this operation ran and did not error but the job has been active and it can not be stopped I have tried stopping it from the front end and through the terminal using ##class(ENSLIB.Job).%New() Stop method. Now my production will not update even if I add a new item to the production I cannot update the item is there a way to force stop this job.

0 4
0 141

I assume IPM manifest tag UnitTest is tightly coupled with the standard unit test framework, right? However we have our own one that predates the standard one and we are not going to switch.

I think I need to import the unit test cases and then be able to run a single class method for the test run. Any ideas how this would be possible?

1 9
0 136

Hi Community,

Play the new video on InterSystems Developers YouTube:

⏯ Using LLMs with InterSystems IRIS Interoperability Productions @ Global Summit 2024

https://www.youtube.com/embed/IQ9r0OWYSZ8
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

1 0
0 145

Hi everybody,

A customer would like to connect an IRIS database to Metabase BI. But Metabase does not have a connector that supports the IRIS database.

Metabase only supports these databases:

- Amazon Athena
- BigQuery (Google Cloud Platform)
- Druid
- MongoDB (recommend version 4.2 or higher)
- MySQL (recommend version 8.0.33 or higher, as well as MariaDB version 10.4 or higher)
- Oracle
- PostgreSQL
- Presto
- Redshift (Amazon Web Services)
- Snowflake
- SparkSQL
- SQL Server
- SQLite
- Vertica

1 3
0 141

InterSystems is pleased to announce that version 3.0.5 of the VS Code - ObjectScript extension has been released. This release includes many bug fixes, as well as changes to the telemetry data we collect. Collecting more product usage data helps InterSystems identify and prioritize fixes and enhancements that will have the most positive impact for you, our users.

Open Exchange app
9 0
0 144

☤ Care 🩺 Compass 🧭 - Proof-of-Concept - Demo Games Contest Entry

Introducing Care Compass: AI-Powered Case Prioritization for Human Services

In today’s healthcare and social services landscape, caseworkers face overwhelming challenges. High caseloads, fragmented systems, and disconnected data often lead to missed opportunities to intervene early and effectively. This results in worker burnout and preventable emergency room visits, which are both costly and avoidable.

Care Compass was created to change that.

Open Exchange app
7 3
1 84