Hi,

I want to list the source if a class in an 'iris session'.

I know I can get a list of all classes in a namespace:

iris session <session> -U "%SYS"

DO $SYSTEM.OBJ.ShowClasses()

===

Is there a similar sinmple command to get the source of a class?

Summary: if you concatenate filenames into /STDOUT and /STDERR in a $zf(-100) call, quote them.

I hit an <ILLEGAL VALUE> error from the following that initially stumped me. This was part of a unit test that worked perfectly fine on Windows, but when CI ran on Docker it failed:

Set outFile = ##class(%Library.File).TempFilename()
Set outDir = ##class(%Library.File).NormalizeDirectory(##class(%Library.File).TempFilename()_"dir-out")
Do##class(%Library.File).CreateDirectoryChain(outDir)
Do$$$AssertEquals($zf(-100,"/STDOUT="_outFile_"/STDERR="_outFile,"tar","-xvf",tempDir_".tgz","-C",outDir)

The

I'm working on my first (!) IPM module and I'm a little puzzled with the registry authorization.

I have a working local registry (I hope!) and the module is loaded (with load-command) to the namespace.

Now publish-command fails because of missing authorization. I have set nothing authorization related myself and I'm lost how the authorization should be configured. All the material I have read so far seems to ignore that and only mentions one have to authenticate ...

Here's the command output:

zpm:IPMTEST1>version

%SYS>     zpm          0.7.3
IPMTEST1> zpm-registry 1.3.2

Hi Community!

We're happy to share the next video in the series dedicated to Gen AI on our InterSystems Developers YouTube:

⏯ Prompt before the prompt - third step of GenAI model training

I have a custom IPM resource processor like:

<Resource Name="example.json" ProcessorClass="OSEX.ipm.demo.IpmResourceProcessor" Foo="from manifest Resource attribute"/>

What is the best practice to deploy the custom resource processors to the IRIS instance? It can't be part of the module that uses it for obvious (?) chicken-egg situation.

My best idea atm is to put all those custom processors into a (library) module and all modules using any of them just have a dependency to the custom processors module.

In a Business Process (Ens.BusinessProcessBPL), how can you correctly call a classMethod?
I know we can call it in a block <code>  :

Or in a <assign>

Are there other ways and/or good practices?
Thanks
Corentin

Hello,
Please, we would need your help 🙂:

In a development environment, we have added quite a few presentation contexts to the DICOM configurations (the associations). We would need to find a way to export them from this environment to make it easier for us to import them in PRO (and avoid doing it by hand one by one).

We know that there is this method, the ImportAssociation(), that given a file, and the names of the local AET and the remote AET, creates it automatically:
    https://docs.intersystems.com/irisforhealthlatest/csp/docbook/DocBook.U…

Hi Community,   OpenAPI-Client Gen has just released, this is an application to create an IRIS Interoperability Production client from Swagger 2.0 specification.   Instead of the existing tool ^%REST that creates a server-side REST application, OpenAPI-Client Gen creates a complete REST Interoperability Production client template.

Install by ZPM:

zpm "install openapi-client-gen"

  How to generate production from Swagger document?   It's very simple.

Open a terminal and execute:

Set sc = ##class(dc.openapi.client.Spec).generateApp(<applicationName>, <Your Swagger 2.0 document>>)

  The first

I'm running a query, joining nine tables together. When I run it with a SELECT COUNT(*) I get about 200,000 rows. When I run the SELECT with the columns I want, I get about 2,700 rows. Is there something inherent with the queries that limits the result set size, or anything I can do to make sure I'm getting back all the results? Rather, than trying to run it about 100 times limiting all previously gotten accounts.

What table would I find the MRN in? I'm trying to write a crystal report and pull that field, but I cannot seem to find it in any of the tables, to be able to add to the report.

Thank you in advance for any help.

Hi! I am trying to export Cache data to my SQL database and am trying to export the schema as well.

The Data Export wizard on the Management Portal only allows me to export the data but not the schema. Is there anyway to get the schema exported as well?

Hi Guys,

I'm calling the expandAll() method to expand the whole tree structure but for some reason its only expanding the root folders but not all elements under those folders ?

var tree = zenPage.getComponentById( "MyTree");
tree.expandAll(true);
 

Thanks

Hello,

Is there any document regarding the embedded sourceControl in HealthShare management portal GUI?

It has Status, Settings,GitWebUI,AddtoSC,Sync,NewBranch,SwitchBranch,Import, ImportForce buttons, I am pretty new to this and I am wondering what these buttons really do behind the scene and when I need to use them.

Thank you

I want to execute initialization code on the start of my business process.

I thought OnInit is a way to go, but apparently not - ^dbg global remains empty:

Class Test.BP Extends Ens.BusinessProcess
{
Method OnInit() As %Status
{
    Set ^dbg = 1
    Quit $$$OK
}
}

Ideas?

Hello,

Could not connect to DB using IRIS studio, and I don`t know why, maybe someone can help.

Checked already user - it have %All rights

Also, tried using _SYSTEM user, but the same error is occured.

Does anyone have suggestions, I will appreciate your help.

Providing some screenshots regarding this problem.

Is anyone using the IPM client (e.g., running commands like zpm "install somepackagename") on an IRIS version earlier than 2022.1?

We're thinking about raising the minimum supported version so we can use Embedded Python in IPM. I'm curious if this would impact anyone. Of course, you'd be able to continue to use an earlier version of IPM.

How do you configure it to have source control on a namespace accessed via the InterSystems Server Manager extension?

An example from the video explains only how it will work with a cloned git repo on a local machine (PC/Mac), but so far, I can't get it to work on a remote development server (replacing existing remote Studio via RDP with local VS Code).

I built a monitoring system in Grafana using the IRIS API /api/monitor/metrics (reading with Prometheus) but I noticed that the RAM usage shown was below that shown by the operating system.
I installed the Zabbix agent and the usage values ​​were higher, but with a line with the same highs and lows but shifted.
The metric in the API is iris_phys_mem_percent_used, described as "Percent of physical memory (RAM) currently in use", in Zabbix it is the Item tag: "component: memory" item: "Memory utilization".

Image below of the graphs in Grafana:

Using the command "free -h" the server returns:
         

So I know we can run routines using both XECUTE or @ 
However both of them run slower than just running the routine without it. (that is because as far as i understand, XECUTE command for example will re-compile before running?)
the question is: how can I run a routine by name - and keeping the performance as good as possible?

As the title suggests, I would like to programmatically export each HL7 schema category as XML, either as a stream object or to a file. How would I go about doing this?

i am trying to embed a dynamic SQL into Objectscript code , but the %NEXT() will return 0 , however when i copy the same query and run it in the SQL bit it will give me the result i want 
the code :

set myquery = "SELECT"
set myquery = myquery_" $PIECE(Substring(M.Rawcontent,Charindex('PD1|',M.Rawcontent),1000),'|',4),"
set myquery = myquery_" H1.TargetConfigName,"
set myquery = myquery_" H.Timecreated,"
set myquery = myquery_" H.MessageBodyId"
set myquery = myquery_" FROM"
set myquery = myquery_" Ens.MessageHeader H"
set myquery = myquery_" left outer join Enslib_HL7.Message M ON

we've set up a new RHEL server 7.9  

I was able to get the portal to work partially from running this command

[root@facsp1 DSA200]# firewall-cmd --zone=public --add-port=57772/tcp --permanent
success

though as I said it was partial. any idea where else I need to change to make this work?

thanks

Paul

It's not supported at the moment but is it possible to implement the Sonatype Nexus (or JFrog Artifactory) support based on the current (or upcoming) IPM version?

In repo command help I see there is a support for filesystem repositories (which I have not yet tried) and my current (hopefully not far-fetched) interpretation is the IPM is designed to be able to support different repositories:

zpm:IPMTEST1>help repo
[...]
  ■ Filesystem repository:
    ∙ -filesystem, -f, -fs : Create/update a filesystem repository
    ∙ -depth, -d <value> : For filesystem repositories, specifies the depth

As the title suggests, I would like to programmatically export each individual data lookup table as XML, either as a stream object or to a file. How would I go about doing this?

I'm trying package IPM command but I'm getting the following error:

zpm:IPMTEST1>package -verbose -only -path /home/irisowner/ osex-ipm-hello

[IPMTEST1|osex-ipm-hello]       Package START
Exporting 'OSEX.ipm.hello.Hello.cls' to '/home/irisowner/src/OSEX/ipm/hello/Hello.cls'
Exported to /home/irisowner/module.xml
Module exported to:
        /home/irisowner/

[osex-ipm-hello]        Package FAILURE
ERROR! ObjectScript error: <VALUE OUT OF RANGE>zConstructTar+19^%ZPM.Utils.FileBinaryTar.1

What's wrong here?

I can see all the correct module files created:

$ ll module.

We are excited to announce the newest addition to our early access program - the Health Data De-ID tool.

The tool will de-identify structured clinical data according to HIPAA Safe Harbor and allow for re-identification if required. It uses InterSystems’ SDA canonical format which is utilized for all our standard transformation from one format to another such as HL7 to CDA, HL7 to FHIR, etc.

Hey Community,

Watch the new video on InterSystems Developers YouTube:

⏯ Securing AI Implementations - Moving from Experimentation to Production @ Global Summit 2024

Description

This is a template for a FastApi application that can be deployed in IRIS as an native Web Application.

Installation

1. Clone the repository
2. Create a virtual environment
3. Install the requirements
4. Run the docker-compose file

git clone
cd iris-fastapi-template
python3 -m venv .venv
source .venv/bin/activate
pip install -r requirements.txt
docker-compose up

Usage

The base URL is http://localhost:53795/fastapi/.

Endpoints

• /iris - Returns a JSON object with the top 10 classes present in the IRISAPP namespace.
• /interop - A ping endpoint to test the interoperability framework of IRIS.
• /posts - A