Hi
Is there anyway to catch info/warnings into an Ens.Alert when the inbound adapter is skipping previously file (of any reason)?
Or any other way to pay attention to it.
In our log it usual have Warning or Info level and it stops there. We really want to create some kind of an alert when it happends.
All suggestions welcome
Sincerly,
Michael
I am beginner to ensemble and went through the introduction of ensemble in that they have mentioned three process of operations which is business service,business process, business operations is there anyway to understand these process can anyone help me on this.
Thanks in advance.
What is the Cache command to display the version of Cache?
To most of us it's almost dogmatic that $H can't be negative!
This is correct concerning the COS Special Variable $HOROLOG.
No doubt. It's the presentation of the actual date & time.
http://docs.intersystems.com/latest/csp/docbook/DocBook.UI.Page.cls?KEY…
For dates before 1841 it's suggested to use Julian date before 1841.
Good for calculations.
But what about values in $H_format ?
Conversion functions $ZD(), $ZDT(), $ZDH(), $ZDTH() and
for SQL $system.SQL.TOCHAR() and $system.SQL.TODATE()
take care of the conversion to human readable date. You know this.
But Julian date as input
SOLVED
tl;dr how can you tell if a number is really a string
The original question has been updated/improved.
Equality comparisons on floating point numbers will produce different results...
"1.1"=1.1 //is true!
"0.1"=0.1 //is not true :(
This second comparison can be fixed with...
+"0.1"=+0.1 // is true!
The problem is, what if we don't realise that a value is a stringy number, or just overlook implementing this defensive check.
One solution would be to lint check %Float properties and return types that should originate from a number and not a string, as discussed here...
I am trying to capture the write of a method to test the response in an unit test. I know everything works because one of my colleagues ran the code and did not froze on his machine.
I don't what is the cause of the freeze. I know that at line Use $io::("^"_$ZNAME) it stopes because i have put some write functions after every line in WriteCapture method and i only saw the first write function in terminal
I also used debug and in this case it didn't froze
PS: forgot to put the status in the XECUTE (vstrCommand, .status)
This is my method that captures the write:
ClassMethod WriteCapture(vstrComma
Hi, Community!
This post is a digest of the Developer Community postings in August 2017.
Most viewed
Your Workflow: Issue Tracking, Version Control etc. 243
Feeling the power of Caché 188
AES Encryption 159
from the roots to InterSystems 156
Server-side way to disable logins for all users 149
Caché and Ensemble 2017.1.x on OpenVMS - Recall 145
Winning in GIS competition 135
Frontier: A different way of working with REST 118
Handling images with Caché & JSON, and why 57 is a magic number 117
Greetings,
Is it possible to save Cache code into a file and then run it via command line?
IE: csession [ini] -U [ini] /path/cacheCodeFile.?
What I need to do is run a Cache script from the Linux command line. The script will navigate data to produce a file and then it will exit back to the command line.
Thanks in advance for everyone's time.
I need to check if one class is a subclass of another (either direct or indirect).
For example:
Class Package.ClassA Extends %Library.Persistent
{
}
Class Package.ClassB Extends Package.ClassA
{
}
Class Package.ClassC Extends Package.ClassB
{
}In this example Package.ClassC is a subclass of 3 classes: %Library.Persistent, Package.ClassA, Package.ClassB.
So any of these checks should return 1:
Write ##class(Some.System.Class).IsSubclass("Package.ClassC", "%Library.Persistent")
Write ##class(Some.System.Class).IsSubclass("Package.ClassC", " Package.ClassA")
WriteHello, I've completed this tutorial: https://community.intersystems.com/post/deepsee-period-date-vs-same-per…
I've used the "year" level instead of a pivot variable.
I want to calculate something like the following variation: 100 * ([DateOfSale].[PTD] - [DateOfSale].[LYPTD]) / [DateOfSale].[LYPTD]
I create a new calculated member, under the same dimmension with the above expression.
I put the new calculated member under the Count measure and it tells me that "Two measures cannot be crossjoined"
What am I doing wrong?
Can you redirect me to some explanations and maybe a solution?
Thanks!
Hi, Community!
Please find the Developer Community Video of the week on InterSystems Developers YouTube Channel:
System Sizing for Insanely Large Deployments
I need to get a list of all classes that are subclasses of two unrelated classes.
For example I want to get a list of all classes that are both:
To get subclasses of one class I can use this query:
set rs = ##class(%Dictionary.ClassDefinitionQuery).SubclassOfFunc("%Library.Persistent")But what about two classes?
I suppose I can run this query twice, build two $lb, then iterate over one of them and build a new $lb with classes that appear in both lists. Are there any better approaches?
Is it possible to dynamically adjust the RetryInterval andFailureTimeout settings in a BPL?
I've got a business process that calls a web service operation to get a session ID from an external system. There is a string property returned in the body of the response that indicate an exception occurred in the external system. I have code in the BPL that examines the property and sets the status property to an error status when that occurs.
Depending on what the value is I want to adjust the RetryInterval and FailureTimeout values used in by the system when the ReplyCodeActions is set to E=RD.
Exampl
Hi!
I am not system admin. But it used to be very simple to install CSP Gateway on an apache system on Linux with Apache installed. I used to run the CSP Gateway installation program and after it was done, all I had to do was fine tune some configurations on CSP Gateway portal on http://<ip>/csp/bin/Systems/Module.cxw and I was up and running.
Good afternoon -
I'm in the process of learning to make COS calls to REST-based web services and while I am having success, I'm struggling on how to parse out the results (I admit I'm very green at this):
Here's the code retrieving the JSON response:
w !,"Get the JSON"Set Result = {}.%FromJSON(Request.HttpResponse.Data)This has Result as a Library.DynamicObject.
I can then write out the response using:
w !,Result.%ToJSON()
This works, I can see the response is valid and what I want. Here is the JSON returned (de-identified):
{
"RecordIDs": [
{
"ID": "1234",
"Type":I'm working on an existing Zen Report that uses queryClass/queryName to retrieve data using a class that has a Stored Procedure method. Which works fine.
I have created second class with a Stored Procedure method, I modified the zen report to use this class and now I'm having the following error.
Error: SQLCODE: -99 Message: User UnknownUser is not privileged for the operation ErrorNo: 5540
Regards,
Rui
Several Ensemble adapters have SERVICEINPUTCLASS and/or SERVICEOUTPUTCLASS parameters defined.
For example:
Class EnsLib.HTTP.InboundAdapter Extends EnsLib.TCP.InboundAdapter
{
Parameter SERVICEINPUTCLASS = "%Stream.Object";
Parameter SERVICEOUTPUTCLASS = "%Stream.Object";
...
}What are they for?
Hi everyone, I have a SQL service that is working fine, except I don't want it to run on a schedule or continuously. I'd like to only run when requested. Run once and then stop until another request. Is there anyway to set up a service like that?
Hello everybody.
What I have is a criteria how to select "my" strings. What I need is to replace all of them with macro calls (using the same strings as arguments) in all classes of current namespace.
I was ready to write straightforward code, but at the last moment decided to ask the community: maybe I've overlooked a smarter option?
Any comments and advices would be great appreciated.
Hi,
I have a process in which i call a rest operation in a while loop, get a response in JSON format of 50 issues, with paging, meaning this call will happen until the total amount of issues will be returned. each JSON is parsed into a proxyObject, and inserted to a list. later the entire list will be sent to an SQL operation which will write the data in the appropriate tables.
The problem i'm encountering, is when i use the "ASSIGN" action, with insert at a certain key (context.i=context.i +1 for each iteration of the loop), i get an Error that says that the value 3 is invalid key.
i've
Trying to use AES encryption for a url. I have a plain text string, a 16-byte key and a initialization vector. I am trying to match a C# implementation that uses RijndaelManaged class with a BlockSize = 128, Mode = CipherMode.CBC, Padding = PaddingMode.PKCS7. The output of the $SYSTEM.Encryption.AESCBCEncrypt(text,key,IV), doesn't match what is coming out of C#. All inputs into the $SYSTEM.Encryption.AESCBCEncrypt(text,key,IV) are converted to UTF8 as in the documentation.
I can encrypt / decrypt in Caché as specified in the documentation, but the string is differet from the C#, so the
Hi folks, I'm trying to pad my patient MRN to 10 characters before I do a SQL lookup in my BPL. I've tried various approaches, and have not been successful.
When I add a "code" statement with the following code, I get an error as below.
set context.NewID = "0000000000"
set $EXTRACT(context.NewID,10-len(context.PatientID)) = context.PatientID
ERROR <Ens>ErrException: <OBJECT DISPATCH>zS8+5 ^CHSLI.BPLQueryDatabaseforPatientID.Thread1.1 *Property 'NewID' in class 'CHSLI.BPLQueryDatabaseforPatientID.Context' must be MultiDimensional -- logged as '-' number - @' set |
Is there a way to omit or skip rollback of some data changes during a transaction rollback? Maybe some sort of "autonomous transaction"?
The issue is with error logging in transaction. For example we may have in nested calls the following structure:
TS
<some code>
<error happens>
TRO 1
<error log to database>
but if this code is in another transaction, and that rolls back we lose error data.
Is there a way to do something like
TS
<some code>
<error happens>
TRO 1
<autonomous transaction start\flag>
<error log to database>
<autonomous transaction finish\flag>
so error log will be stored anyway?
I know about
Hi All, I want to run the routine automatically when the system gets login.How to do that?
Hi, folks!
I'm sending emails with %Net.MailMessage.
How can I add a new line for the email body?
The code is:
dim msg as %Net.MailMessage = ##class(%Net.MailMessage).%New()
set msg.Charset="UTF-8"
do msg.TextData.Write("Dear "_Username)
do msg.TextData.Write("Line1")
do msg.TextData.Write("Line2")
And I'm getting in email:Dear UserLine1Line2
How can I get:
Dear User Line1 Line2
I want to manipulate all the objects whose type is%Dictionary.StorageSQLMapDefinition by %OpenId
However, I don't know the exact id to feed into %OpenId, is there a way to query all the existing ids of %Dictionary.StorageSQLMapDefinition in a namespace?
Thanks.
We are running Caché v2010.2 on OpenVMS and are receiving the message, 'Unable to start the database read test' in our CCONSOLE.LOG.
I was wondering if anyone could offer some insight on this as I was not able to find the error mentioned in the documentation.
Does anyone know of a utility to compare two databases (i.e., CACHE.DAT files) and find globals/subscripts that are different between them?
If not, I'll write one and share it. 
I have a simple SQL service that does a simple select from an SQL database. After the select, I do an update to set the ProcessedFlag to "Y" for yes, so my next pass doesn't select records already processed. The service works fine, except when it's done I get the error below, anybody know what is causing this error?
Hi all,
I'm exploring using installation manifests to deploy Ensemble configuration changes. I noticed that the documentation uses a macro within an "Error" tag.
<Error Status="$$$NamespaceDoesNotExist">
So I thought this would also be possible with "Var" tags, "If" tags, etc. For example:
<If Condition = "$$$isDevEnvironment">...
I wanted to use the same manifest file, but execute certain things on different environments, but it doesn't seem that this macro gets resolved in this case - I thought the code generation step of would handle this.
I understand that I can achieve the same with different
