HealthShare Patient Index – Virtual April 30-May 2, 2024   9:00am-5:00pm US-Eastern Time (EDT)

• This 3-day course teaches the installation, configuration, and use of HealthShare Patient Index.
• Day one focuses on patient identification issues, and the tools that can be used for reviewing records identified by the system for human attention.
• This session is appropriate for both technical staff and administrative staff who manage patient identification issues.

InterSystems has encountered a defect that causes some upgrades of HealthShare® Health Connect to fail. This only affects instances that are not licensed for the use of FHIR® and that have interoperability-enabled namespaces. Under these conditions, the upgrade fails with an <HSFHIRErr> error.

This defect only impacts upgrades to version 2024.1 of HealthShare Health Connect.

The affected version, 2024.1.0.263.0, has been removed from distribution.  A new Point Release is available:

Hot on the heels of our announcement last week about our ultra-high-performance mg-dbx-napi JavaScript interface for IRIS, we are now pleased to announce a significant new technology - mg_web - which not only represents a new paradigm for JavaScript Web Frameworks, but also delivers significantly higher performance than even the fastest of the established Node.js Web Frameworks, whilst leveraging all the benefits of the big-three industry-standard Web Servers.

InterSystems' team is heading to the MIT Hacking Medicine GrandHack 2024, taking place from April 19-21 2024!

MIT GrandHack is a premier event that brings together innovators, entrepreneurs, and healthcare professionals from around the world to collaborate on solving some of the most pressing challenges in healthcare through technology and innovation.

InterSystems is pleased to sponsor and support this event, offering our technology to hackers and presenting the "The GenAI in Healthcare" challenge.

We're excited to see the innovative projects that will arise from this event!

EnsLib.File.PassthroughOperation has File Name property with default value: %f_%Q%!+(_a)

The Management Portal documentation description of the property:

Name of file to output the document(s) to. May include timestamp specifiers. The %f specifier if present will be replaced with the name of the document's original source filename (stripped of characters illegal in target filenames).

See the method Ens.Util.File.CreateTimestamp() for documentation of timestamping options.

More documentation describing the behaviour of %f: https://docs.intersystems.com/irislatest/csp/docbook/DocBook.UI.Page.

We have JSON type data in a Dynamic Object.  Is there a simple way to export / dump that data to a delimited string or file?

e.g.

Results={"ClassA":{"ClassName":"ClassA","ACount":367191880,"BCount":367191880,"CurrentDiff":0,"PreviousDiff":0,"ReportDate":"2024-03-02 00:00:00"}
"ClassB":{"ClassName":"ClassB","ACount":5352149227,"BCount":5352149227,"CurrentDiff":0,"PreviousDiff":0,"ReportDate":"2024-03-02 00:00:00"}}

Hi Community,

I am trying to read a JSON file and convert into HL7 message.Please find the example below

Set Jsonobj={"Doctype":"ADT^A01","PatientId":"123","PatientName":"Alex"}

Set Dynjsonobj= ##class(%Library.DynamicObject).%FromJSON(Jsonobj)

Error :<THROW>%FromJSON+37^%Library.DynamicAbstractObject.1 *%Exception.General READ error while reading input stream 10 Line 1 Offset 0

I am getting this error while reading the file,Can you please tell me where i am doing wrong in converting the file?

Joe

I would like to compare two Registered Object and list the properties that differ.

Hi Community,

It's time for the new batch of #KeyQuestions from the previous month.

Here are the Key Questions of March chosen by InterSystems Experts within all Communities:

I though this is a pretty cool way of installing webterminal in an environment where I had Management Portal / Visual code access, but I had no terminal access. zpm was already present. otherwise you could add it in the same class.

1. Create the following class file
2. Compile. This will take a while, and then you will see the output from zpm!
3. You can now open the webterminal by opening http://your-host/terminal/

Class Theo.Util.Webterminal Extends %RegisteredObject
{

/// Description
ClassMethod install() As %Status [ CodeMode = objectgenerator ]
{
    zpm "install webterminal"
}

}

It is probably somewhere in the doc. So hard to search. Hope InterSystems going to AI on their community/support data. 

How to see a meaningful value in management portal - sql explorer. For instance
Class MySetting Extends %Persistent{
     Property Name As %String;

Class MyObj Extends %Persistent{
    Property Setting As MySetting;

When browsing MyObj in management portal (just select * from MyObj - lazy to do a join), I will see 1,2.. values in the Setting column. I would like to see the Name. I do not want index MySetting with Name as primary as the name can change

Thank for your comment.

Hey Community,

Here is a digest of the Developer Community videos on InterSystems Developers YouTube Channel in March 2024:

Hi Community, 

We'll show you the recent changes to InterSystems HealthShare Clinical Viewer and what is coming next:

⏯ InterSystems HealthShare Clinical Viewer: New & Next

I recently had the need to monitor from HealthConnect the records present in a NoSQL database in the Cloud, more specifically Cloud Firestore, deployed in Firebase. With a quick glance I could see how easy it would be to create an ad-hoc Adapter to make the connection taking advantage of the capabilities of Embedded Python, so I got to work.

Preparing the environment

To start, we need an instance of the database on which we can perform the tests. By accessing the Firebase console, we have created a new project to which we have added the Firestore database.

Hey Community,

Watch the latest video on InterSystems Developers YouTube:

⏯ Using Vector Search for Generative AI

in which Community Docker package can I find 
HS.Gateway.Access.RemoteOperations.cls 

Hi all,

I have a situation where I am writing to global from different processes - let's call it an Event Queue.
There is then a different process that uses $order to read through the data - the PubSub processing BP.

Sometimes the writing of this global will form part of a transaction that also insert data into other tables, using tstart and tcommit.
If there is some issue, it will roll back, and the entry written to the global will also roll back.

Updated Jan 19th, 2023.

Hi all,

I want to share a quick little method you can use to enable ssl with a self signed certificate on your local development instance of IRIS/HealthShare. This enables you to test https-specific features such as OAuth without a huge lift.

1. Install OpenSSL

Windows     : Download from https://www.openssl.org or other built OpenSSL Binary. 

Debian Linux: $ sudo apt-get -y install openssl

RHEL        : $ sudo yum install openssl

2. Create a self-signed certificate pair.

Say I've been developing a web application that uses IRIS as the back end. I've been working on it with unauthenticated access. It's getting to the point where I would like to deploy it to users, but first I need to add authentication. Rather than using the default IRIS password authentication, I'd like users to sign in with my organization's Single Sign On, or some other popular identity provider like Google or GitHub. I've read that OpenID Connect is a common authentication standard, and it's supported by IRIS. What is the simplest way to get up and running?

Introduction

There is a Link Procedure Wizard option within the Management Portal (System > SQL >Wizards > Link Procedure) which I had reliability issues with so I decided to use this solution instead.

Problem

You need to query an external SQL database to use the response within a namespace. This guide is assuming that you already have a working stored procedure in SSMS although you could instead use a SQL block within the operation. Stored procedures in SSMS are preferred to maintain integrity, Embedded SQL can get very confusing if you have a complicated SQL statement.

Visual Studio Code releases new updates every month with new features and bug fixes, and the March 2024 release is now available. 

I am currently adding a field to our Existing messaging from Epic, however there might be a possibility I need to back load data into the Ancillary system. While I have the previous messages that can be sent, they do not have this additional field that I am adding to the message.

I can do a lookup against Epic Clarity SQL Database; however, I don't want to throw a wrench into the workflow if the system cannot connect to the Epic Clarity SQL Database.

• What is the best solution for this?

Hi,

I am trying to connect to another server using  %Net.HttpRequest.

I keep getting this error  : SSL23_GET_SERVER_HELLO:unsupported protocol.

My guess is that the site I am reaching for uses TLS1.3 which is not supported in 2016, But I cant right now ask my client to upgrade.

Is it possible to override this ? install some kind of a patch or a more recent version of openssl on the server ?

Thanks

Amiram

InterSystems FAQ rubric

The Web/CSP Gateway management page is typically configured so that it cannot be accessed from client machines.

To access from any client, do the following:

1. Launch a browser from a system with access to the Web/CSP Gateway management page and access the Management Portal.
2. Under Management Portal > System Administration > Configuration > click CSP Gateway Management.
3. Click Default Parameters that appear in the left pane of the page that appears.
4. Enter *.*.*.* in the system management machine and press the Save Settings button.

For example, I have two timestamp values ('2024-04-01 10:00:00', '2024-04-01 11:30:30'). I would like to find the difference between these two timestamps, and I need the result in hours:minutes:seconds (hh:mm:ss) format.

Expected Output: 01:30:30

Note: I need an SQL query command. I should not use ClassMethod, Function, or Stored Procedure.

Could anyone please provide me with an SQL query for my question?

Hi Guys,

I'm converting our system from Ensemble 2014 to 2018 and we do have Security package of classes in deployed mode in our 2014 (eg. Users, Role, ...etc) which doesn't exist in our newly installed 2018, so how can I include those classes in 2018?  

Thanks

Hi Community,

Watch this video to learn about InterSystems Startup Program and hear lightning pitches from startups innovating with InterSystems technology:

⏯ Startup Showcase - Lightning Pitches @ Global Summit 2023

A report that I need to create - I need to write a class method that will execute a few queries and save the data to a class and then return the data in a result set that can be used in the Logi report as a Stored procedure.

I can create the class method that is a Stored procedure and do the queries and manipulate the data, however I am having an issue at the end of the method to return the fields back as a result set.

Hi Guys,

After converting from Ensemble 2014 to 2018 and ran my application I get the below error message:

MSDS.ZEN.Component.imageclickbuttom exits and compiles fine and also compiled the Zen page extending the class successfully  but still getting the error so not sure why I'm still getting the error!?

Thanks

Hi Community!

It's time to celebrate our 19 fellow members who took part in the latest Technical Article Contest: InterSystems IRIS Tutorials and wrote

🌟 21 AMAZING ARTICLES 🌟

Our judges mentioned that it was a very tough challenge to choose only three articles each because more deserved points. Despite it all, they persevered and now it's time to announce the winners!

Let's meet the winners and look at their articles: