Is there a command that will loop through the flat files of a given Linux/Unix folder?  I can write the code to open and read each file. But the file names are unknown. I am looking for a way to access each file given a named Linux folder. The files have differing structures so a record map will not work.

Thank you for reading and thank you even more for answering!

Hey Community,

Tired of entering login-password during the docker build with your InterSystems IRIS every time?

There is a handy way to turn it on and off – use the passwordless zpm module.

Watch this video to explore how to use the passwordless ipm module to turn on and off entering login-password during docker build with your InterSystems IRIS:

⏯️ Passwordless mode for development with InterSystems IRIS

I have experienced that my iris server is gone due to upgrading the docker version when I have built IRIS server on docker container.

Based on this experience, I'd like to show you how to make a backup for the IRIS server before upgrading platform or docker, and the procedure for rebuilding the IRIS in a new environment.

###IRIS server backup procedure

When you have finished building for the IRIS server, you need to make a backup.

I recommend you that you make a backup before upgrading if you have classes,routines and globals that you want to take over when you rebuild your environment.

This "{}"

Hi,

In some of the trakCare screens there is term "Production" shown [Interoperability->Production Configuration]
What is a production?

The production I'm looking at, is related to a Gateway.

What is a definition of a Gateway? How is this different to an Interface?

Under Gateway Production, there are "Services", "Processes", "Operations".

How are these defined to be?

I have 3 services, each with a green dot.

I have 3 processes , each with a green dot.

I have 5 operations, 4 of which has a green dot and one red dot.

For each of the "Services", "Processes", "Operations" it opens up a side window that has

When I run my IRIS in a Docker Container I know the host an know the mapped ports
so access is no problem.

BUT: is it possible from my IRIS
- inside a Container
- 'inside' Docker
to find the actual IP address of the Host?
This may sound strange, but for error tracking, it could be quite important.

Dear all,

We would like to invite you to an exciting online event related to the InterSystems Open Exchange app gallery. The purpose is to discuss the features and upgrades of the Open Exchange and gather feedback from the Community.

Date: March 1st, 2023
Time: 9:00 am Boston // 3:00 pm Berlin // 6:00 pm Dubai // 10:00 pm Beijing time
>> Registration here <<

Topics that we will cover:

InterSystems announces the Maintenance Release (MR) of Caché, Ensemble and HSAP 2018.1.8. This is a maintenance release with many updates across a wide variety of areas.

Caché and Ensemble

Full product installation kits can be downloaded from the WRC Software Distribution website:

• Caché
• Ensemble

For information about the corrections in this release, refer to the Release Changes Notes. The documentation for Caché and Ensemble includes these as well as the Supported Platforms document, the Class Reference, and a full set of guides, references, tutorials, and articles.

The build number for this

I am looking into creating a ZSTOP as you probably have seen from my previous posts, is there a way to capture the type of shutdown that occurred? So say if there was an unknown hardware failure (forced), vs a user shutdown? Mainly looking for user or system shutdown when we force another destination to become the primary in the mirror. So if a user shutdown the production to do.,... Task A, Task B etc..

Thanks

Scott 

Hey Developers, 

Please welcome a new set of Global Masters badges for ✔️Accepted Answers on Developer Community! 

As you may remember, you get +150 points on Global Masters each time your answer marked as accepted on DC. And now we have a special set of badges and additional points for a number of accepted answers!

And...

🐞🐛▶ There is a helpful tool which allows us to debug code visually with different colours.

I found a package on OEX for a Sharding Demo
If Sharding is NOT included in the Community License
I can not use the Community Distribution but require a different one.
And have to add ZPM manually. 

Hi Community,

Watch this video to learn about InterSystems FHIR Server, the turnkey FHIR data solution that empowers FHIR application developers to focus on building life-changing healthcare applications:

⏯️ What is InterSystems FHIR Server

To prepare a migration to IRIS I use Docker images.
The (aged) application is built around Caché Terminal
And on Windows,  IRIS uses the same ctelnetd.exe as Caché.

In my Docker installation, Telnet Settings are just grayed out in SMP.
and my Terminal can't 'connect.
Port mapping is OK and verified with TCP

Working from the console in Docker  with the whole set of ESC and
screen formatting is not acceptable.
We tried WebTerminal but there is just no Partition behind as in Terminal.

How can I switch on Telnet support in the Docker image?
 

InterSystems is happy to announce the availability of our newest Data Platforms release: Caché and Ensemble 2016.2

The highlights of 2016.2 are:

• Server support for Atelier, the new Eclipse-based IDE
• Support for OAuth 2.0 and OpenID Connect
• SQL syntax has been enriched with support for JSON
• SQL improvements and performance enhancements

For complete technical details of what’s changed in 2016.2, review the Caché release notes and the Ensemble release notes.  Additional materials have been posted to the InterSystems Developer Community. 

Atelier is available separately and the initial release

Suppose I created a new DeepSee class to display a new item in the dashboard.

DeepSee.Component.datePick

Wich, in general, is just a copy of a similar class in %ZEN with minor changes. I need to include it in the base install. How can i do this? Am I ever allowed to change the composition of system classes? 

Hi Guys,

Could I have the steps on how to restore Cache.dat from Journals pls?

Thanks

Is there a way of comparing code running on two Ensemble servers - ideally excluding certain types of difference?
We are a new team working in HealthCare (lots of HL7, some web-services). As well as doing new development on local servers with suitable source control, we have a large code base we've inherited from an external supplier for which we have no log of versions or differences. We have a live server and test server - and we've stumbled across a couple of places where there are differences in logic in addition to the expected differences in endpoints.

I know this problem something to do with sort and collation and string comparison vs numeric only strings, but I can't fathom out the details of it. 

I have the following global, where all values are suffixed with a space, I believe the intention is to prevent empty strings and force string comparisons rather than numeric.Which is fine when searching for an exact match, so searching for "ABC" internally looks for "ABC ", or "800999" looks for "800999 ".However one function tries to search for strings containing, (specifically beginning with), a partial code.

Hello,

I want to generate and return an http response based on the input of a http GET request. For my first steps I used an EnsLib.Http.GenericService, which uses an EnsLib.HTTP.InboundAdapter to receive requests like http://[my server]:[my-port]/some-path?ID=12345678.

On the inbound side I receive a EnsLib.HTTP.GenericMessage Object which contains the parameters and some other useful information that I can work with.What I would like to do now is to create a simple HTML page, which contains some Information specific for the given parameter values.

Hi Every one

I'm working on how to use SOAP with my API and StoredProc.

Currently, the method I use is csp page to be able to get pamater from external website and Call my StoredcProc
Step 1 Get pamameter from external site
Step 2 Run My Storeproc
Step 3 Return JSON format

How to create soap and call StoredProc function from external website?

Hi all,

I'm trying to install ZPM into a new instance of IRIS to download packages of utilities in our develop server.

When I'm loading the file zpm-0.5.3.xml it is throwing the following error:

Any help?

Thanks in advance

Hi, 

We're having an issue with an inbound message to a Healthshare Business Service where the '£' sign is not being recognised and is being passed onto our downstream systems as '?'.

NTE|1|ODRCMNT|test!���comments  �  for  pou$nd si�n

We are using the 'latin1' selection for the Encoding.

Does anyone know the correct Char Encoding to use to remedy this issue?

Regards,

Martin

Hey guys.

I'm having trouble using the Certificate in my BO.
It started to occur after updating the certificate.

I have 2 configurations and 2 certificates, the first one was updated and no error occurs, the second one, the  bad certificate or Handshake failure errors occurs. Both have the same configuration.
I already tried marking SSLV3, handshake error occurs. When I unchecked it, a Bad Certificate error occurs.

Do you know what I can do in this case to solve it?I looked for some threads in the community, and I didn't find a solution for my case.
The Certificate works correctly on other systems

Hi all,

When I run the ^SystemPerformance utility to collect performance data about my IRIS instance (community), it manages to collect all sorts of data except for data related to ^perfmon. I am using %SYS to run the utility which should have all privilages, not sure what's meant by the below error message

perfmon

Command failed to run.
Error response from 'logman' command:


Error:
Access is denied.
Try running this command as an administrator.

Thank you!

Hi developers!

You are experts in IRIS and know all tricks. The functionality of $ZF(-1,-2,-100, ......)
is nothing new to you And you know the limits of this functionality.
Both give you access to your local server command line environment. And that's it.

Hi everybody!

Many developers prefer a dark version of applications. Not surprisingly, @Guillaume Rongier posted an idea of making a dark version for the Developer Community. 

So we look forward to hearing from you.

Please send us your feedback by using this Poll on the Ideas Portal, and by voting and commenting on the relevant idea.

Thank you in advance for your votes and have a good day!

Hi  

Is there any build in solution to convert HTML to PDF?  if yes please how

Thank you

Hello,

I'm trying to populate an object with method :  JSONStreamToObject

This is an extract from my JSON:

 "GEOMETRIE_POINT": {
    "GEO_TAB_COORDONNES": [
      673993.9987,
      7048087.2013
    ]
  },
  "GEOMETRIE_LINE": {
    "GEO_TAB_COORDONNES": [
      [
        675221.6371,
        7049913.2718
      ],
      [
        675149.6053,
        7049998.3874
      ]
    ]
  }

It work fine with GEOMETRIE_POINT with this class definition:

Class Test.GEOMETRIEPOINT Extends (%Persistent, %JSON.Adaptor, %XML.Adaptor, %RegisteredObject, Ens.Request) [ Inheritance = right,

Hi Developers,

This February, you posted 86 new questions on the Developer Community: