Yesterday I downloaded and attempted to install the newest version of the Community Edition of IRIS but not the preview, and attempted to update an older version, but each time I tried to install it, I would get an error, and then an antivirus program would indicate that it had identified and blocked a threat (McAfee identified it as GenericRXAA-FA!EAEEF9B8457F with a location of C:\Users\jivey\AppData\Local\Temp\pbt3FDD840C\IRIS_x64.msi).

Dear community!

It was an amazing 2022 with all of you. Great questions and articles around the whole year and this brings us the most valuable gifts -- wisdom and knowledge.
I want to thank you all for a great year full of fun and pleasure.

This community rocks.

Thank you Intersystems for being a strong partner to all of us.
I know some of my friends are now retired ( Gerd Nachtsheim *wave*) but I want to thank the whole team of Intersystems to make this year again a successful part of my life. Your products rock and I know I am a part of it next year.
God bless you all.
Happy New Year 

Hello, my name is Roger, I work in a big hospital in Brazil, I'm new to the MUMPS area, I was given an assignment to try to stabilize our MSM/MUMPS system, we have licenses for 1200 connections, however, the MSM starts having problems when we reach about 990 connections, the terminal has a timeout, it gets stuck. Looking at the MSM settings parameters I noticed the following default settings, could this be related?

The InterSystems learning site now has updated offerings for HealthShare customers.

We recently updated courses about Health Insight Data Flow and Dynamic Cohorts. The dynamic cohorts course provides you with a virtual machine with Health Insight installed, which you can use as a learning sandbox.

For the full set of Health Insight offerings, visit the Health Insight Learning Path.

Hey Developers,

We know you've been waiting for this for a whole year. The time has finally come! 

Join the Advent of Code 2022 with InterSystems and participate in our ObjectScript contest to win $$$$ prizes!

ipython-iris-magic

%%iris magic for IPython, can run ObjectScript command in Notebooks

It can be run in any Notebook and does not require any special setup on IRIS or the Notebook.

Demo

Native Api

I have a CSP page that throw a "414 error - Request-URI Too Long" when I put lot of text (eg : 10000 characters) into a field of a submitted form. The form is submitted using POST method.

Based on some experiments I made, it seems the max size of a URL is around 8200 characters.

What is the official limit, and is there a way to increase it ? I searched in the documentation but couldn't find anything.

Hi Community,

Watch this video to learn what's in store for patient experience initiatives for our hospital clients:

⏯ Patient Experience and the EHR @ Global Summit 2022

While you don't need to take your exam before the end of 2022, the vouchers provided to the UK&I Summit 2022 must be redeemed before January 1, 2023. Please register for an exam before time runs out. 

You can find additional information about the InterSystems Certification Program here.

Hello Community!

Welcome to the new edition of the InterSystems Ideas News! Learn what we've been up to this past couple of weeks.

Hello,
I tested the query on the Config.ConfigFile table of the Namespace %SYS, it returned 3 lines and a fatal error:

SELECT
*
FROM Config.ConfigFile

I tested the same query on other IRIS instances (including a 2021.1 instance) and got the same error.
Is it a bug in IRIS or is there something wrong with the installations?
Anyone who can test and leave in the answers if they got the same result, I would be grateful.
Thank you for your attention.

Hi InterSystems Developers!

Recently I've updated the FHIR dev template so that it now publishes an IPM package fhir-server that makes the setup of InterSystems FHIR server a trivial manual or automatic or programmatic procedure one command long.

Please see below how you can benefit from it.

TLDR

USER>zpm "install fhir-server"

All the details below.

Hi,

I know json does not impose any order, but for readability I would like to insert a json property at a specific location at the start of a %DynamicObject, not at the end.
Is there a known way to do that (other than string manipulation)?

Hi! 've installed a fresh IRIS on Windows 10: "InterSystems IRIS Version 2022.2.0.368 xDBC Protocol Version 65"

I've tried to create an older demo database that I've build some days ago... it didn't work anymore :-(

If I execute this SQL:

LOADDATAFROMFILE'D:\dev\openflights_dataset\data\countries.csv'INTOdc_data_flights.countries(id,code,name,continent,wikipedia_link,keywords)VALUES(id,code,name,continent,wikipedia_link,keywords)USING{"from":{"file":{"header":true,"columnseparator":","}}}

It is

Hi folks!

What is the way to know if I'm on IRIS for Health not just IRIS?

$ZV doesn't show any difference:

IRISAPP>w $zv
IRIS for UNIX (Ubuntu Server LTS for x86-64 Containers) 2022.2 (Build 368U) Fri Oct 21 2022 17:18:04 EDT

What is Web Scraping:

In simple terms, Web scraping, web harvesting, or web data extraction is an automated process of collecting large data(unstructured) from websites. The user can extract all the data on particular sites or the specific data as per the requirement. The data collected can be stored in a structured format for further analysis.

Steps involved in web scraping:

1. Find the URL of the webpage that you want to scrape
2. Select the particular elements by inspecting
3. Write the code to get the content of the selected elements
4. Store the data in the required format

It’s that simple !!

The

Hey Developers,

Enjoy watching the new video on InterSystems Developers YouTube:

⏯ Introduction to Analytics with InterSystems IRIS

Was wondering if anyone had a simple way of calling  ##class(Ens.Director).EnableConfigItem() within a Business Process or adding code to a Custom Service to start or stop the object?

The use case is that I have a Process that uploads a file into a external SQL table. When it is finished I want it to kick off another Service that does the processing of the data that it just uploaded. Once it is finished the response is sent back to the service and when the service receives the response from the process, I want to stop that service from running.

so...

1. Service  A sends file to Process A to

Hi

Just posting this here also, sent an email to support too.

Leaning paths are down and loggin in to results in 

error/auth intersso/error:soapfaultx

I initialize a HS.SDA3.Container from a XML stream and I need to iterate over it twice. What is a correct way of doing it? Is it enough to adjust StreamPos/StreamOref?

The optimal solution would be to use one loop, but it's not possible to combine the processing logic.

set oSDA = ##class(HS.SDA3.Container).%New()
do oSDA.InitializeXMLParse(.tQuickStream)

while oSDA.GetNextSDA(.tType, .tPatient) {
        // processing logic A
}

set oSDA.StreamPos = 1do oSDA.StreamOref.Rewind()

while oSDA.GetNextSDA(.tType, .tPatient) {
        // processing logic B
}

Hi Friends ,

I have created inbound DB adapter business service. Now my requirement to trigger this service at 10am daily.

I used scheduler , but I don't know when should i configure for stop. this not suits for my requirement.

Is there any other way , where I need to trigger service only once , in configured times.

Thanks,

Prashanth

What I can do:
Get a subset of HL7 messages.
Send the messages to a RecordMap (with key fields from the HL7 message).
Save each message to a file.

How can I send all messages until a set time (e.g. 9am each day) to single file?

Scenario:
In the period 09:00 1 Jan 2022 to 09:00 2 Jan 2022 there are say 50 messages to save to file: File001.txt
In the period 09:00 2 Jan 2022 to 09:00 3 Jan 2022 there are say 40 messages to save to file: File002.txt
etc

I would prefer to append the message data to the relevant file as they go through the system (real time), so the data builds up in the respective file

So, the next year will bring us a new way of installing IRIS. Always keep in mind that you have to bring your own web server. No matter how many instances of IRIS you have on your local machine. Or if you work in Docker, always keep in mind a bit more complicated configuration.

And I now want to understand the costs of this decision for end-developers like most of here.

Let's have a look, at what we got out of the box in Web Applications, obviously do not forget about System Management Portal.

Quite a few REST APIs, some of them for internal use only, are not supposed to be accessible in the

A good writer is supposed to draw you in with the title and bury the answer somewhere in the article.  I suppose this makes me a bad writer – don’t think less of me, my whole feeling of self-worth comes from the opinions of internet strangers! 

IAM 3.0 Release

InterSystems API Manager (IAM) version 3.0.2 is now Generally Available.  IAM 3.0 adds significant new functionality including:

• Secrets Management – Save credentials and other secrets in HashiCorp Vault, AWS Secrets Manager, GCP Secrets Manager, or environment variables
• Dynamic Plugin Ordering – Specify the order in which plugs are run
• OpenTelemetry Integration – Collect & export tracing in OpenTelemetry format
• UI Enhancements
• ARM Processor Support – You can now run IAM on ARM64 architecture machines, include M1 & M2 Apple Macs
• WebSockets – Enable management of

If you would like to try the new installation process for the NoPWS project, you can get access to the Early Access Program (EAP) here. (https://evaluation.intersystems.com/Eval/)

Once you have registered, please send InterSystems the email address you used to register for the EAP to  nopws@intersystems.com.

Look here for background: Original Post

When using GUI is there a way to have Studio use the numbers for HL7 instead of the words for the path?

When in the code view is there a way to have Studio use single quote instead of double quote?

Hello,

I'm inserting a row using an insert statement from dotnet InterSystems.Data.CacheClient.CacheCommand.

Is there a way to get the inserted ID or IDs if I've inserted multiple rows?

Regards, Timo

Hello everybody,

In the documentation I read the following:

Alerts are messages generated by production components. InterSystems IRIS automatically writes the alerts to a log file and sends then to the production component named Ens.Alert. If your production does not have a component named Ens.Alert, then InterSystems IRIS writes alerts to the log file but does not send them to any component. The component named Ens.Alert can be of any class. The most frequently used classes for Ens.Alert are:

I am not able to find the log file where the alerts are stored...