#InterSystems IRIS

The current jdbc driver version is 3.1.0, but it is not published in the public mvn repository, only the old version, see:

https://mvnrepository.com/artifact/com.intersystems/intersystems-jdbc

It is very bad to the Java Community. And why not publish IRIS Hibernate dialect in mvn repository too?

These actions are important to Java Developers.

I came up with a challenge for myself to come up with a way to make a variable watch itself for a certain value and do something when it hits that value without having to check it every time something touches it. Basically, a way to say "if at any point during the execution of this code, if x = 0 (or whatever the condition is) do this thing." The class I ended up with watches a %Status:

Class User.WatchedStatus Extends %RegisteredObject
{
Property sc As %Status [ InitialExpression = 1, SqlComputeCode = {set {*} = ##class(User.WatchedStatus).

InterSystems FAQ rubric

For naming conventions, please check the respective document pages below.

About table name (class name): Identifier rules and guidelines - classes

About column names (property names): Identifier rules and guidelines - class members

As stated here, only alphanumeric characters and characters with Unicode code points larger than ASCII 128 can be used in column names (property names).

• The name must begin with a letter, a Unicode code point greater than ASCII 128, or a percent sign (%).

Is it possible to start a terminal attached to a process (JOB)?

For example, I have a 548 process being debugged by VSCODE.

I would like to start a terminal, attached to the process to check process global values ​​by running the command "zw ^||MYGLOBAL"

Hello, I'm curious to see how other people deal with this: we have a text file that was created on someone's Windows machine and it was copied and pasted into a text file on someone's Mac machine.  After some examination we realized that the line feeds were originally CRLF (for Windows) and when copied and pasted they were changed to LF (Mac).  The diff program we used didn't pick up on this and the program we wrote to read the file was getting each line of the CRLF file and treating the whole file as one line for the LF file.

Maintenance Releases 2022.1.5 & 2023.1.4 of InterSystems IRIS, IRIS for Health, & HealthShare HealthConnect are now available

Two extended maintenance releases of InterSystems IRIS, InterSystems IRIS for Health, and HealthShare Health Connect are now available.

✅ 2022.1.5

Release 2022.1.5 provides bug fixes for any of the previous 2022.1.x releases.

You can find the detailed change lists & upgrade checklists on these pages:

• InterSystems IRIS
• InterSystems IRIS for Health
• HealthShare Health Connect

✅ 2023.1.4

Release 2023.1.4 provides bug fixes for any of the previous 2023.1.x releases.

So as asked, I am not talking about KILL - KILL as stated in the docs:

This command removes the variable. If there are no further references to the object, this command also removes the object from memory,

 I want to remove the object from memory even if it is still referenced in memory - I understand that cache is not a low-level programming language, But i was hoping there is a way. 
Notice that have a RegisteredObject and it is a single reference, It is different than the UnSwizzles suggested in other posts.

How can I  extract the sub-string before the last occurance of a delimeter in a string.

string = "aaDtext1Dtext2"

Delimeter = D

answer I need = aaDtext1

The InterSystems IRIS has a series of facilitators to capture, persist, interoperate, and generate analytical information from data in XML format. This article will demonstrate how to do the following:

1. Capture XML (via a file in our example);
2. Process the data captured in interoperability;
3. Persist XML in persistent entities/tables;
4. Create analytical views for the captured XML data.

Capture XML data

The InterSystems IRIS has many built-in adapters to capture data, including the next ones:

1. File Adapter: used to get files from network folders.

Hello everyone, I need some help. 

I have to send some events for a government WebService that I already imported the WSDL and XSD's and It worked fine and I'm able to build the message and connect into the service, but It has been rejected with the message that the XML is wrong and the only diference between the Caché SOAP message to all the examples that the government gave us is the header:
   

This is how the Government is expecting the message:

<?xml version="1.0" encoding="utf-8"?>
<soap12:Envelope
	xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
	xmlns:xsd="http://www.w3.

I was not able to get IAM working on my Development Server because of issues with creating volumes as a Non root user, so I opted to run it within Docker on my WSL Ubuntu locally. I was able to get it running, however the Workspaces is empty, and the Dev Portal is not enabled.

At this point do I need to sign up for the free Kong Konnect? or what are the next steps?

Thanks

Scott

my login does not have WRC Direct access.

How can I get this access to download the Intersystems IRIS kit?

Hi all,

I was wondering if there is a way to modify the results you get in the code assist in Visual Studio Code. Ideally even per class or package.

For example: the code below is for a custom component of a framework. From all the options listed I'm only interested in my own property "Title" and I don't want to see any %-methods or auto-generated methods like "TitleSet" and "TitleGet".

I have been looking at the %Api.Atelier classes, but it seems that it's only calling a list of deprecated methods when opening this list.

With the advent of Embedded Python, a myriad of use cases are now possible from within IRIS directly using Python libraries for more complex operations. One such operation is the use of natural language processing tools such as textual similarity comparison.

Setting up Embedded Python to Use the Sentence Transformers Library

Note: For this article, I will be using a Linux system with IRIS installed.

Hi everyone,
I have this global with 2 informations in it: Reference (ex: 1329) and Code (ex: JMMK-G1D6).

^DataTest    =     3
^DataTest(1)    =     $lb("","1329","JMMK-G1D6")
^DataTest(2)    =     $lb("","1516","AMEV-GVPF")
^DataTest(3)    =     $lb("","2333","4QC6-4HW3")

With ObjectScript, i want to test if Reference 1516 exists in the global. 
In the InterSystems portal, i can do it with SQL (SELECT count(*) FROM DataTest where Reference = '1516'), but can we do the same in ObjectScript without SQL and manipulating the global directly ?

Thanks for help.

Hello everyone,

I'm currently working on a business operation that employs a retry mechanism with a FailureTimeout = -1. So, this BO attempts to resend the message at the end of a RetryInterval of n seconds (n is configurable).

What I would like to achieve is to set a timer that runs in parallel with the sending mechanism so that, If I don't receive a response within m seconds (m also is configurable and m<=n) from the initial message send (with RetryCount = 1), an alert or something similar is triggered.

InterSystems FAQ rubric

When you run a routine in the terminal and an error occurs in the program, if you have not set the error trap properly, the program will enter debug mode as shown below.

USER>do ^error1
 write A
^
a+2^error1 *A
USER 2d0>

From this state, enter the Quit command to return to the state before the routine was started.

USER 2d0>Quit

If a transaction is being processed within the routine where the error occurred, a prompt similar to the one below will appear.

Hi everyone.

I have a function that may end up being called from a number of transformations at the same time, and within the function there's some Embedded SQL to first check if a local table has an entry, and then adds the entry if it doesn't exist.

To prevent a race condition where the function is called by two transformations and they both end up attempting to insert the same value, I'm looking to use the table hint "WITH TABLOCK" on the insert, but this seems to be failing the syntax checks within vscode.

Are table hints supported with embedded sql?

Hi,

I was struggling with a procedure that was meant to receive a string and use it as a filter, I've found that since I want the procedure to do some data transformation and return a dataset, I needed to use objectScript language.

Hi,

i have this simple json structure:

{
"nTypeTrigger": "ATR",
"sDate": "2024-04-17 15:29:16",
"tRefArray": [{"sID":"132"},{"sID":"151"},{"sID":"233"}],
"tCountries": []
}

I can't find an example to iterate on tRefArray.

I've tried to create a secondary iterator but it doesn't work. Here is my current code:

 // extract json content from the request:
 set dynRequestJsonPayload = {}.%FromJSON(%request.Content)
 set JsonIterator = dynRequestJsonPayload.%GetIterator()
 
 // iterate on json structure:
 if dynRequestJsonPayload '= "" {
    while JsonIterator.%GetNext(.key, .

Hello!

I wonder if anyone has a smart idea to extract an XML fragment inside a text document (incoming from a stream)?

The XML fragment is surrounded by plain text.

Example:

text...........
text...........
<?xml version="1.0" encoding="UTF-8 ?>
<Start>
...etc
</Start>
text...........
text...........

The XML is not represented by any class or object in the Namespace.

The XML can look different from time to time

Appreciated if anyone knows how to use Objectscript to extract the XML content.

Regards Michael

Hello everybody, 

I've been experimenting with Embedded Python and have been following the steps outlined in this documentation: https://docs.intersystems.com/irislatest/csp/docbook/DocBook.UI.Page.cl…

I'm trying to convert a python dictionary into an objectscript array but there is an issue with the 'arrayref' function, that is not working as in the linked example.

This is a snapshoot of my IRIS terminal: 

USER>do ##class(%SYS.Python).Shell()

Python 3.10.12 (main, Nov 20 2023, 15:14:05) [GCC 11.4.

  Hello all, i am new to IRIS in combination with VSCode, can anyone guide why this error appears ? Any suggestions are welcome. Thank you in advance.

Hi Guys,

I'm new to IRIS and I'm converting from Ensemble 2018 to IRIS but not sure how to convert my cache.data file to IRIS.dat, I copied my cache.data to a new folder then went to IRIS management portal and created a new database and specified the directory to where my cache.data and saved and I thought that IRIS will automatically convert cache.dat to IRIS.dat but instead it created a new empty IRIS.dat, I guess I was wrong in my assumptions !?     

also by leaving the New Volume Threshold size as zero is that mean that I always have only one IRIS.

Hey Community,

Play the new video on InterSystems Developers YouTube:

⏯ Unleashing the Power of Machine Learning with InterSystems @ Global Summit 2023

Spoilers: Daily Integrity Checks are not only a best practice, but they also provide a snapshot of global sizes and density. 
Update 2024-04-16:  As of IRIS 2024.1, Many of the below utilities now offer a mode to estimate the size with <2% error on average with orders of magnitude improvements in performance and IO requirements. I continue to urge regular Integrity Checks, however there are situations where more urgent answers are needed.

• EstimatedSize^%GSIZE- Runs %GSIZE in estimation mode.   
• ##class(%Library.GlobalEdit).GetGlobalSize(directory, globalname, .allocated, .used.

With System Alerting and Monitoring (SAM) being deprecated in the near future..

• What is everyone's go-to for Monitoring IRIS? 
• What is readily available?
• What is the cost surrounding it?

Just trying to get ideas floating around of what we might need to start looking at to satisfy IT leadership.

Thanks

Scott

Hello community,

in addition to HL7 V2 interfaces mediated via TCP/IP, we have been implementing more and more HS.FHIRServer.Interop.Service based services that are addressed via port 57772.
We would like to secure access to the Management Portal now and have come up with a procedure that I would like to discuss.

1. The local server firewall only allows access to port 57772 for the IPs of the administration PCs (and some few other exceptions).
2. A REST service is introduced for access to FHIR endpoints, which listens on a different (accessible) port.

What user can be used to initiate IRIS container in emergency access mode on startup?