#InterSystems IRIS for Health

Terminal garbled code, how should I handle it

I recently started work on trying to Tighten Security in our Development Instance of IRIS that is running based on recommendations from our Audit as you might of seen from my other posts. I am currently trying to get into the Private Web Gateway Manager within IRIS as CSPSystem, but when I attempt to sign in nothing happens. 

I went through and reset the password in the CSP.ini and within IRIS for CSPSystem. I made sure it had the new GatewayRole per suggested 

https://docs.intersystems.com/healthconnect20231/csp/docbook/DocBook.UI.Page.cls?KEY=GSECURING_tighten#GSECURING_tighten_smp_CSPSysAuthe

Introduction

We are in the age of the multiplatform economy and APIs are the "glue" in this digital scenario. Since they are so important, they are seen by developers as a service or product to be consumed. Therefore, usage experience is a crucial factor for its success.

In order to improve this experience, specification standards such as the OpenAPI Specification (OAS) are increasingly being adopted in the development of RESTFul APIs.

What is IRIS ApiPub?

I am trying to lock down security within our Development environment per requirements from a Security Audit that was done earlier this year. I need to try to limit access at a public level, access to cache users, and exposure.

I installed IRIS with the Lockdown method, and have configured my web applications, services, resources, etc.

When I go into my namespace, I am constantly presented with the following error when I try to start or stop an Object...

Cannot login as IRIS manager. Please confirm the '_Ensemble' user is enabled and is assigned the '%All' role.

We currently have a couple of Shell scripts we have written to EnableConfigItem from a Unix (Red Hat) command line, so we can control when a Service/Operation is running via the cron in Unix. We do this by calling

:>iris session xxxxx

using _system user.

During our Security audit it was mentioned that we need to lock down some of the cache users. 

• So, has others written scripts to make IRIS calls via command line?
  • If so, what is the consensus of using a Cache user vs using say a LDAP service account?
• Or what have you used in the past to ensure that the password is not hardcoded anywhere?

Hello Community,

InterSystems FAQ rubric

In the sample below, an image file is encoded into a Base64 string in a class property, saved, decoded again with Base64, and restored to another file.

【Usage class】

Class User.test Extends %Persistent
{
Property pics As %GlobalBinaryStream;
}

【When importing】

InterSystems FAQ rubric

On Linux, use the iris command to execute a routine or method from a shell and get the return value.

For more information,  please refer to the document "About Instance Connections".

An example of a command is as follows.

iris terminal instname [arguments]

The return value of a shell script can be specified using a special variable using the Terminate() method of the %SYSTEM.Process class when the process ends, rather than by specifying an argument in the QUIT or RETURN command that is specified when a routine or method ends. Use the method of returning a value to $?.

Hello,

I am trying to get FHIR Resource using OAuth 2.0 . I get access_token sucessfully but when I use this token i get this type of error in postman. It is showing 401 Unauthorized please suggest any solution.

Thank You  

InterSystems announces its second developer preview for the 2023.3 release of InterSystems IRIS^® and InterSystems IRIS for Health^TM.

Future preview releases are expected to be updated biweekly and we will add features as they are ready.

Please share your feedback through the Developer Community so we can build a better product together. Initial documentation can be found at these links below. They will be updated over the next few weeks until launch is officially announced (General Availability - GA):

• InterSystems IRIS
• InterSystems IRIS for Health

Highlights

Are you preparing to use VS code for the first time? Just make sure you have enough privileges.

Have you defined your Iris server in your VS Code settings, and still get the following error?

VS Code accesses Iris/HealthConnect using the web application /api/atelier. If you do not have permission (i.e. you are using an LDAP user to connect and the web application is not configured to support LDAP), this is the reason why you couldn't connect.

Hi, How could I configure a FHIR server instance programmatically to allow unauthenticated access? This article explains how to set the Debug mode option value, but the HS.FHIRServer.API.ConfigData class does not contain a field which disables basic authentication for the endpoint.

All,

I've asked my teammate to open a WRC on this issue, but wanted to open the discussion to see if maybe we aren't the first people to see this issue.

The code we are deploying is a COS object with some Python methods. The code works fine locally on the developer's machine. However, when the business process runs in the server environment, we see the following when COS code attempts to call a [Language = python] method:

Hey Community,

Enjoy watching the new video on InterSystems Developers YouTube:

⏯ Envisioning a Data driven Future @ Global Summit 2023

Hi Community,

to learn quickly and in total autonomy on IRIS, I offer you some links which can help you in this beautiful bicycle ride rich in discoveries: 

The related package avoids adding %JSONAdaptor to each class but uses  instead   
SQL functions JSON_OBJECT() to create my JSON objects. With this approach, you can   
add JSON to any class - even deployed ones - without any need for change or recompiling.

The trigger was the Export of M:N relationships  as JSON  objects or arrays.

Hi Community

I have created one business service created from "HS.FHIRServer.Interop.Service" in FHIR production.

I want to validate FHIR Patient resource that the age must be greater than 18 years.

How can I achieve this from objectscript as well as from DTL?
Thanks

Hello, I'm developing a custom ZPM package and debugging the installer.

In default mode (zpm install), the process terminates with the following error: ERROR! : <COMMAND>LoadNewModule+133^%ZPM.PackageManager.Developer.Utils.1 *NoTransaction

With the -dev flag (zpm install -dev) everything works fine. What could be the problem?

I need to run a SQL query and use the output to map PV1 7.1. The query is :

SELECT ID
FROM TestTable
WHERE ProviderName = 'TEST,PROVIDER' AND IDType= 'BPI'

When I run this query with the 'TEST PROVIDER'  I do pull the ID in question but I can't figure out how to do it from the DTL given that there are various providers sent in PV 1 7 . Any assistance will be greatly appreciated. 

I have created a FHIR endpoint and send the FHIR resource to FHIR Interoperability production class which is HS.FHIRServer.Interop.Service through the the created endpoint(/r4). I can able to see/get the HS.SDA3.QuickStream(It use CacheTemp.HS.Stream temporary global) on the fly(In between the process). I'm unable to get the FHIR resource from the QuickStream once the process completed. Is this HS.SDA3.QuickStream is wiped out from the system once process completed?

Executed the below code. Even tried with zwrite of ^CacheTemp.HS.Stream is also empty. Tried with IRSITMEP database as well.

I have been testing FHIR and Iris OAuth2 but have noticed that my callback (redirect uri) I have configured in the Client config, gets called multiple times with the same code.

Has anyone else experienced this issue?

Any help would be appreciated 

I am trying to do a rewrite using the webgateway-nginx docker container but getting an "unknown directive sub_filter' message. How can I add additional nginx modules into a webgateway nginx container?

Hi,
Getting the below error while posting FHIR resource to FHIR Server

Looking Forward
Thanks

InterSystems FAQ rubric

The meaning of each timeout value is as follows.

1. [Server response timeout]

If IRIS/Caché processing (routine or query execution) does not finish within this set time, the browser will return an error.

For example, if this value is 60 seconds and it takes 90 seconds to execute a routine/method/query, an error will occur.

2. [Queued request timeout]

For each IRIS/Caché server configured in CSP/REST, you can limit the number of processes that can run CSP/REST concurrently.

Hi Community, 
 

Can I please check what the size limit for the parameter in  $SYSTEM.Encryption.Base64Decode() method ? 

I have a 12 page base64 encoded PDF document, which is failing when decoded. I am getting the error below:

ERROR <Ens>ErrException: <ILLEGAL VALUE>zXSDToLogical+1^%Library.Binary.1 -- logged as '-' number - @''

OBX:5 size=4233781

I tried the below from terminal, but it is not able copy the whole string for the parameter so couldn't execute it. 

Set text=$SYSTEM.Encryption.Base64Decode("JVB<<TRUNCATED>>) 

My original ZAUTHENTICATE.mac to use Delegated sign on did not include GetCredentials(), however I am being told it probably should have it so I am eliminate an error I am seeing when trying to troubleshoot the ZAUTHENTICATION. I am trying to add the GetCredentials() from the documentation to the existing ZAUTHENTICATE.mac  but I am getting an error

InterSystems announces its first developer preview for the 2023.3 release of InterSystems IRIS^® and InterSystems IRIS for Health^TM.

Future preview releases are expected to be updated biweekly and we will add features as they are ready.

Please share your feedback through the Developer Community so we can build a better product together. Initial documentation can be found at these links below. They will be updated over the next few weeks until launch is officially announced (General Availability - GA):

• InterSystems IRIS
• InterSystems IRIS for Health

Highlights

Hello developers!

We are holding the first technical article contest on Japan's InterSystems Developer Community!

The first contest is a technical document writing contest, and you can submit any content related to the InterSystems IRIS/InterSystems IRIS for Health. (The article must be in Japanese.)

✍ InterSystems Japan Technical Document Writing Contest: Articles related to IRIS ✍

🎁 Participation prize: There will be a participation prize for everyone who submits an article for the contest.

🏆Special prize: Authors of three selected works will receive special prizes.

Entering the contest is easy! Please post an article related to IRIS on the developer community during the period from Wednesday, September 6, 2023 to Monday, November 6, 2023.

Hi Community,

Enjoy watching the new video on InterSystems Developers YouTube:

⏯ Getting to Know FHIR: The Best Explanation of FHIR They've Ever Heard @ Global Summit 2023

I am mapping a field to the FHIR Location resource field address.line.  Using message class HS.FHIR.DTL.vR4.Model.Resource.Location

The line field is repeating

I set field as such,

This causes the error,

ERROR <Ens>ErrException: <INVALID OREF>zTransform+71^AH.AHEDSLPFD.Transforms.ReltioEntityToPFDFHIRLocation.1 -- logged as '-' number - @' If 'tIgnore { Set tSC=target.address.line.SetAt(zVALz,(1)) }'

Any suggestions on how I can format the target?