HealthShare Patient Index – In Person October 3-5, 2023   9:00am-5:00pm US-Eastern Time (EDT)

• This 3-day course teaches the installation, configuration, and use of HealthShare Patient Index.
• Day one focuses on patient identification issues, and the tools that can be used for reviewing records identified by the system for human attention.
• This session is appropriate for both technical staff and administrative staff who manage patient identification issues. Day two starts with installation, and in the course of two days moves through the initial configuration of a system, the pr

InterSystems has corrected two defects regarding connectivity. These defects and their corrections are independent of each other.

This alert addresses them both because there are point releases containing both corrections.

Both defects only impact versions 2019.1.4 and 2020.1.4 of:

• InterSystems IRIS®
• InterSystems IRIS for Health™
• HealthShare® Health Connect

Neither defect impacts any released version of HealthShare Unified Care Record®, Information Exchange, Health Insight, Patient Index, Provider Directory, Care Community, Personal Community, or Healthcare Action Engine.

The fir

InterSystems FAQ rubric

It can be retrieved using the schema INFORMATION_SCHEMA.

INFORMATION_SCHEMA is a system schema and is not displayed by default in the SQL menu of the Management Portal.

The method to display it is as follows.

1. Open Management Portal → System Explorer → SQL menu.
2. Check "System" on the left of the schema drop-down.
3. Select INFORMATION_SCHEMA from the schema dropdown.

The SQL to get the ID, field name (COLUMN_NAME), data type (DATA_TYPE), description (DESCRIPTION) for the specified table (Sample.Human) is as follows.

SELECTID,COLUMN_NAME,DATA_TYPE,DESCRIPTION

Earlier today I enrolled at Cloud Services Portal and clicked "Start trial" for the "Health Connect Cloud" service. Next step was "Create Deployment". The only deployment size offered was "Micro", so I picked that, completed the other required details and clicked "Create".

Response was:

I reported this using the "Submit Feedback" option on the dropdown from my username in the top right of Cloud Services Portal but haven't yet received a response. Hence this DC post, in case someone here can tell me what I'm doing wrong.

Hello everyone!
I need to build something that will receive a REST request. As of now I have tried my luck with using an EnsLib.HTTP.InboundAdapter. But i am not so sure how I am supposed to configure it to be able to receive the REST request together with the JSON body.
I have specified the OnProcessInput in the adapter so that it receives a GlobalCharacterStream. However, I have not had any good luck finding out to actually make the request to the EnsLib.HTTP.InboundAdapter. 
I would be really thankful if you could let me know if it is possible for an EnsLib.HTTP.InboundAdapter to actually rece

I usually receive complains from our customers about the BPL and DTL web pages automatic refreshes, it's a common problem among newbies users but for veteran developers too, they forget to save the changes regularly and automatically the web page is reloaded, losing all the work done.

Maybe an autosave would fix this problem that produces a deep feeling of hate and resentment against InterSystems technology among our customers. I've added an idea in our portal, so feel free to vote it!

https://ideas.intersystems.com/ideas/DPI-I-452

InterSystems FAQ rubric

You can avoid the error by specifying a stream object as the argument of %ToJSON() used when generating a JSON string from a dynamic object.

A code example is below.

USER>set temp=##class(%Stream.TmpCharacter).%New()

USER>set jsonobj={}

USER>set jsonobj.pro1=["a","b","c","d"]

USER>set jsonobj.pro2=["あ","い","う","え"]

USER>do jsonobj.%ToJSON(temp)

USER>write temp.Size
51
USER>write temp.Read()
{"pro1":["a","b","c","d"],"pro2":["あ","い","う","え"]}

See also the documentation for details.

[IRIS] Serializing large dynamic entities to streams

Serializing l

With the world (as well as our own technology) moving to the cloud at such a fast pace it is easy (at least for myself) to get caught up in the little details. One thing I, and some clients of ours, had run into a couple of times was the necessity to specify the version of the images one plans to use with the IKO.

For example, one issue that often gets overlooked is the compatibilityVersion field for the IKO. Depending on which IKO you are using there is a default value (for IKO 3.6 this happens to be 2023.2.0, and for IKO 3.5 this is 2022.3.0). If you intend to use a different version of an I

Good morning,

Thank you for taking the time to read, understand, and answer this question.

If you needed to convert a message where questions are separated by "|", and the question text is the portion before the ":" and the response is the portion after the ":"; Which way would be the most readable and understandable for other developers?

Input example:

NAME OF SQUAD 1?:ALPHA|NAME OF SQUAD 2?:BRAVO|NAME OF SQUAD 2?:ANSWER THREE||NAME OF SQUAD 25?:YANKEE|NAME OF SQUAD 26?:ZULU

Output structure:

[
    {
        "definition": "question 1",
        "text": "NAME OF SQUAD 1?",
        "answer"

Hi All! Thought I would share our most recent podcast episode, which featured a conversation I had with Heather Capel and Chi Nguyen-Rettig of LEAD North. They talked about their journey from the beginning with InterSystems products, some of the challenges and opportunities building a team for healthcare integrations, and more. 

In this article, I am demonstrating how to create a table column(formerly known as properties) with your custom datatype classes by using User defined DDL. Properties are the crucial member of the persistent class definition. Datatypes are essential to define types of values that are stored in a table column. In general, the datatype names of SQL different from Intersystems datatypes, such as VARCHAR = %String. you have the ability to create or modify a table by using these datatypes. Indeed, you’re creating the tables through DDL and you have your own datatype classes are already defined. Tho

Introduction.

Have you ever felt like your PDF files take up too much space on your server? As you collect more and more of these files, you might run into storage issues that can be costly to solve. But what if there was a way to shrink the size of these PDFs by 50% to 70% without compromising the document's visual clarity.

Today, we're going to explore a solution for this problem that I really like: GhostScript.

What is GhostScript?

Ghostscript is a free and open-source software suite that provides a powerful set of tools for compressing documents, including PDFs. Ghostscript offers s

Hey, I'm working with HealthShare 2016.2 and trying to implement a custom integration using ObjectScript. I have followed the usual syntax for setting up the integration, but I keep getting an undefined variable' error. Has anyone encountered a similar issue? Here's a snippet of the code I'm using :
set customData = 'Sample Data';
write customData;
 

InterSystems FAQ rubric

It can be obtained using AllFields query of %SYS.ProcessQuery class.

For the details, please refer to the document Process (Job)【IRIS】／Process (Job).

An example of execution in the terminal is as follows.

USER>set stmt=##class(%SQL.Statement).%New()
USER>set st=stmt.%PrepareClassQuery("%SYS.ProcessQuery","AllFields")
USER>write st   // you can call %Execute() when st = 11
USER>set rset=stmt.%Execute()
USER>while rset.%Next() { write rset.%Get("JobNumber"),"-",rset.%Get("Pid"),"-",rset.%Get("OSUserName"),"-",rset.%Get("CurrentDevice"),"-",rset.%Get("Routine"),"

Hello!

I'm currently trying to setup a SFTP Ensemble production to handle all of my SFTP transactions. It's been going well, but I'm currently running into an issue where it is saying it is unable to exchange encryption keys. Error Below:

Unable to exchange encryption keys [80101005] at Session.cpp:238,0' matched ReplyCodeAction 1 : 'E=R' resulting in Action code R

Any advice on getting around this would be appreciated.

I created a web service and used the Studio SOAP Wizard to generate a client from the WSDL file of the service. But the client is throwing the error as shown below

 WebServiceClientClass '' could not be instantiated, or the WebServiceURL Location could not be determined

What have I missed?

Is there a better way to create a client?

InterSystems Change Control: Tier 1 Basics - Virtual September 6-8, 2023   9:00am-5:00pm US-Eastern Time (EDT)

• This course – consisting of 3 days – teaches Change Control Record (CCR) application users how to safely and efficiently progress code changes as well as changes made to interoperability components such as productions and data transformations. By the end of training, learners will be able to leverage the workflow and documentation tools, use CCR Transport to move changes, follow best practices to prevent crises, and debug common errors.
• This course is applicable to all Tier 1 use

If you hold the InterSystems HL7 Interface Specialist certification, you can potentially get recertified and have your certification expiration date extended by five years by beta testing our new InterSystems HL7 Interface Specialist Recertification project. The project includes hands-on exercises to validate core skills for developers who use InterSystems products to build and test HL7 v2.x productions. During the beta period, which extends until October 31, 2023, anyone who holds the credential is eligible to try the project, and the standard $150 fee is waived for candidates.

The passing s

Overview

We often run into connectivity problems with HealthShare (HS) deployments in Microsoft Azure that have multiple HealthShare components (instances or namespaces) installed on the same VM, especially when needing to communicate to other HS components while using the Azure Load Balancer (ILB) to provide mirror VIP functionality.  Details on how and why a load balancer is used with database mirroring can be found this community article.

As per Azure Load Balancer documentation, https://docs.microsoft.com/en-us/azure/load-balancer/load-balancer-overview#limitations, the Azure Internal Lo

I noticed that the XCPD processor has a setting for PDQ minimum threshold and maximum record count returned, but PDQ does not have these settings. Can anyone explain why? They are essentially the same service.

I'm trying to track down documentation on how HealthShare + HSPI prioritizes patient demographics that are returned in various scenarios. I've done some experimenting but was looking for some confirmation.

1. HSPI  - It's my understanding that trusted tiers and aging factors only impact the HSPI management UI experience. That they are not incorporated into patient search response. Can someone confirm this?

2. Patient Search Response (Clinical Viewer, PDQ, XCPD, FHIR) - Only Registry demographics are used. Nothing from HSPI or Patient SDA.

3. Patient Search Response Sort - It appears that it

Hi Community,

Enjoy watching the new video on InterSystems Developers YouTube:

⏯ Introduction to InterSystems Products

InterSystems has corrected two defects.

The first defect can cause an ECP application server to hang. This defect is only relevant to ARM and IBM Power processors; it is present in version 2022.1.2 and 2022.1.3 of InterSystems IRIS®, InterSystems IRIS for Health™, and HealthShare® Health Connect. The correction is identified as DP-423661. The defect is addressed in all future versions. 

The second defect can, in rare circumstances, cause dejournaling to hang. This defect is present in versions 2020.4, 2021.x, 2022.x, and 2023.1 of InterSystems IRIS®, InterSystems IRIS for Health™, and Healt

Hi Community

I am using a standard DTL for Allergy Intolerance but it shows codes for Category and Severity Columns on cliinical viewer.

I have copied the standard DTL to my custom folder and I want to modify it to show descriptions for these two columns but I don't know how to do it.

Please see the below DTLs for Category and severity and advise how I can change them to get descriptions.

Category DTL section

<if condition='source.category&apos;=""'>
<true>
<if condition='source.category.Count()>0'>
<true>
<assign value='##class(HS.FHIR.DTL.Util.Lookup).Code("vR4","SDA3","allergy-intol

Hi Community

I want a FHIR resource example that will populate allergies as displayed below, I am currently focussing on only allergies and not alerts.

Hello,

We have created a New User but we do not know how to allow it to see Message's content:

What role or permission we should add to allow it?

We have already added:

We have also read:

https://docs.intersystems.com/irislatest/csp/docbook/DocBook.UI.Page.cl…

https://docs.intersystems.com/irislatest/csp/docbook/DocBook.UI.Page.cl…

https://docs.intersystems.com/irislatest/csp/docbook/DocBook.UI.Page.cl…

What role or permission we should add to allow it?

When creating custom Business Hosts, it's often necessary to add properties to the class for additional settings that will be used in the initialization or operation of the host. The property name itself isn't always very descriptive, so it's an advantage to have a custom caption display with the field.

In Caché, it was fairly straightforward:

TEST> Set^CacheMsg("EnsColumns","en-us","<property name>") = "<caption>"

But It involves a bit more effort in IRIS ...

In IRIS, the caption names of business host and production properties are stored in ^IRIS.Msg("EnsColumns"), which is normally map

I'm open for new opportunities and challenges. Remote Job for any part of the world. Languages: portuguese, english and spanish.

I have more tha 20 year of experience with InterSystems Technologies. 
Two InterSystems Certifications.
Large HealthCare Interoperability Experience.
I'm worked on large projects in Brazil, Chile, United States.
Knowledge in other program languages then COS, like Java, Python, C#, JavaScript, R.

mail: cristiano.js@gmail.com

LinkedIn: https://www.linkedin.com/in/cristianojs/

Hello again everyone.

In our previous article we saw how to configure our EMPI to receive FHIR messages. To do this we installed the FHIR Adapter that InterSystems made available to us that configured a REST endpoint to which we could send our FHIR message. We would then get the message and transform it to a %String that we would send via TCP to the output of our EMPI configured in our HSPIDATA namespace.

Alright, it's time to see how we retrieve the message, transform it back to a %DynamicObject and parse it to the class used by the EMPI to store the information.

Message reception by TCP

The extended maintenance releases of InterSystems IRIS, InterSystems IRIS for Health, and HealthShare Health Connect 2023.1.1 are now available. This release provides bug fixes for the previous 2023.1.0 releases.

You can find the detailed change lists / upgrade checklists on these pages:

• InterSystems IRIS
• InterSystems IRIS for Health
• HealthShare Health Connect

How to get the software

The software is available as both classic installation packages and container images.  For the complete list of available installers and container images, please refer to the Supported Platforms webpa