Hi All

I'm having a problem with cleaning user inputted text from a HealthCare system my HealthConnect system interfaces with.

The input can be anything posted into an RTF box on an app which stored in oracle, and extracted by HealthConnect from oracle via an XML based API.

When the XML is returned, various values are read out of it using %XML.XPATH.Document and it is the presence certain characters entered into the RTF fields cause XPATH to throw an error. For example,

0 4
0 319

Hello everyone!
I need to build something that will receive a REST request. As of now I have tried my luck with using an EnsLib.HTTP.InboundAdapter. But i am not so sure how I am supposed to configure it to be able to receive the REST request together with the JSON body.
I have specified the OnProcessInput in the adapter so that it receives a GlobalCharacterStream. However, I have not had any good luck finding out to actually make the request to the EnsLib.HTTP.InboundAdapter.

0 8
0 238

Hello!

I'm currently trying to setup a SFTP Ensemble production to handle all of my SFTP transactions. It's been going well, but I'm currently running into an issue where it is saying it is unable to exchange encryption keys. Error Below:

Unable to exchange encryption keys [80101005] at Session.cpp:238,0' matched ReplyCodeAction 1 : 'E=R' resulting in Action code R

Any advice on getting around this would be appreciated.

0 3
0 239

Hi Community,

Please give me an example on how to configure email alerting based on the rules and send out emails accrordingly.

As a message comes into the business service component I want to check specific fields and if a field for example active = true i want to send it to a different email and if active = false I want to send it to a different email as well.

Guide me on how to accomplish this requirement and let me know if InterSystems uses a default SMTP server or I must have that server in place.

Regards

0 8
0 210
Question
· Nov 20, 2023
HL7 field for base64 in orl

Hi everyone,

It could be great if some of you have had experience in hl7 v2 messages. The question is about FHIR to hl7 v2.5 conversion. I have to translate a binary resource, encoded in base64 into an orl_o22 message. Do you have advices? Which field could be used for that datatype?
I have found some implementation using nte segment but it is limited in characters.

Thank you

0 5
0 203
Question
· Nov 12, 2023
SSL Certificate Error

Hello,

I have recently created a HA by "Cloning" the existing server. Everything worked fine until I have to failover the Primary in order to process. The Backup Failover member successfully promoted to the status of primary. Everything was working fine except on one of the Services, I receieved the following error message;

> ERROR #6156: No match between server name 'Test111b.domain.local' and SSL certificate values 'Test111a.domain.local'.

0 2
0 198

Hello,

I have a situation where Intersystems Cache (2018.1.8) terminal and studio sessions are fully functional, but the Management Portal is not accessible.

It is displaying the "HTTP 500 Internal Server Error" message. I have checked and my user account is Enabled and not disabled.

Thank you,

Farman

0 4
0 188

I have a pResponse output in my onrequest method, in here I build an ACK and set the pResponse variable to it, and return a status object afterwards.

The pResponse doesn't show up in the trace or message viewer, yet if I move the interface to another more established namespace it works fine, what settings or config could be preventing the ACKS going back?

0 4
0 185
Question
· Feb 28
Installation hangs

I had some issues with my install so I tried removing the software using Windows Add/Remove programs but it just froze. It messed up my install and now I can't access the SMP.

I tried reinstalling using the same commands I did on first install but it froze again. There were no logs in the installdir that was created. Windows log just shows install started.

0 5
0 132
Question
· Nov 30, 2023
Multitransformations of HL7

This question originally appeared in the comments of the post: Making use of Multiple Sub Transforms in a main map || HL7

I'm having a similar problem trying to get PRD(1) into PV1:ReferingDoctor and PRD(2) into PV1:ConsultingDoc

Running the subtransform will populate referring doctor for the first PRD, and then the second running will delete the PV1, make a new one with only the consulting doctor populated.

0 1
0 135

Hi Community

I am using a standard DTL for Allergy Intolerance but it shows codes for Category and Severity Columns on cliinical viewer.

I have copied the standard DTL to my custom folder and I want to modify it to show descriptions for these two columns but I don't know how to do it.

Please see the below DTLs for Category and severity and advise how I can change them to get descriptions.

Category DTL section

0 5
0 124

Hi Team,

Is there any way to disable all operation ( or services) in a production entirely?

For example when restoring from one HealthShare environment to another we may need to get the configs (IP, port, ssl etc ) updated before staring the operation. We set the production autostart to disabled but still need to disable the operation one by one if we want to start production without operations enabled.

Thank you for your help.

1 6
0 118

Hey everyone,

I'm currently running into a very weird issue to where I am trying to connect with a 64 bit version of SQL Server Management Studio (SSMS) to a HealthShare instance. I have created a System DSN using the Drivers (image below) that were downloaded with the Client version of the install and I'm able to successfully connect using my credentials.

0 2
0 122

First of all, thanks for your help, and time reading this question.

Why, when we send a SOAP message from SoapUI to a SOAP service in a HealthShare environment called 'ESBCHUIMI,' it recognizes the 'Credenciales' header, which has 'usuario' and 'password' as properties. This class is a %SOAP.Header.

However, when we load the WSDL using the SOAP wizard from this SOAP Service to another HealthShare environment called ESBSSCC and send it from SoapUI to ESBSSCC, when it is being forwarded from ESBSSCC to ESBCHUIMI, the ESBCHUIMI's service outputs:

0 5
0 113

Good morning,

Thank you for taking the time to read, understand, and answer this question.

If you needed to convert a message where questions are separated by "|", and the question text is the portion before the ":" and the response is the portion after the ":"; Which way would be the most readable and understandable for other developers?

Input example:

NAME OF SQUAD 1?:ALPHA|NAME OF SQUAD 2?:BRAVO|NAME OF SQUAD 2?:ANSWER THREE||NAME OF SQUAD 25?:YANKEE|NAME OF SQUAD 26?:ZULU

Output structure:

0 2
0 115
Question
· Dec 4, 2023
Custom Application Metric

I made a custom application metric, imported it to the USER namespace and used:

set status = ##class(SYS.Monitor.SAM.Config).Add.ApplicationClass("historymonitor.errorSensor", "USER")

to add it. When I do 'w status' it returns 1 so it is added but I still can't see the custom metric in the api/monitor/metrics endpoint. Even though I added %DB_USER in the application roles for api/monitor.

Does anyone know where the problem might be that the metrics endpoint still doesn't show my metric?

0 1
0 114

Hi,

I am having an issue when I am publishing data to FHIR which is hosting in AWS. I am sending the data to the Cloud FHIR url but getting the below error.

Any idea how to resolve this issue? Any example to cretae FHIR repository using Object script?

:<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN"> <html><head> <title>404 Not Found</title> </head><body> <h1>Not Found</h1> <p>The requested URL was not found on this server.</p> </body></html>

0 2
0 94