New post

#Globals

6

Globals are multidimensional sparse arrays which are stored in InterSystems Data Platform. Everything in InterSystems Products is stored in Globals: Classes, Tables, Documents, Code.

Documentation.

Hi everyone,

We have successfully configured the Patient Index and are now looking to bring it to upper environments. Our plan is to export the Linkage Definition and import it into higher environments to avoid any manual work. However, I am having trouble finding an export option in the Linkage Definition Designer and locating the globals that hold this setup.

I would greatly appreciate any tips or guidance on how to export/import the Patient Index configuration between environments.

Thank you in advance!

0 4
0 74

Hi:

We are looking again into DB size. Looking at our Ens.MessageHeaderI GSIZE is 3767107

Looking at the global i'm not sure if we have had an issue in the past so much of the data looks the same, we only have 3 values in the $zwc and although some of the data in the $c between 1 and 18630 it looks very similar as if there was an issue in the past. But if anyone has any examples of their index param this would help to know if our global is abnormal.

Data below

0 1
0 49

Hi everyone,
I have this global with 2 informations in it: Reference (ex: 1329) and Code (ex: JMMK-G1D6).

^DataTest = 3
^DataTest(1) = $lb("","1329","JMMK-G1D6")
^DataTest(2) = $lb("","1516","AMEV-GVPF")
^DataTest(3) = $lb("","2333","4QC6-4HW3")

With ObjectScript, i want to test if Reference 1516 exists in the global.
In the InterSystems portal, i can do it with SQL (SELECT count(*) FROM DataTest where Reference = '1516'), but can we do the same in ObjectScript without SQL and manipulating the global directly ?

0 4
0 152

In cache studio there are features, dialog boxes, that help map data from a global to class properties.
I have used %CacheSQLStorage quit a bit, or have in the past, to map globals to classes.

I haven't been able to find a similar feature in VisualStudio.
Do I need to upgrade to IRIS to be able to use VisualStudio to map global properties to classes?

Thanks for your time,
Richard

1 2
0 103

I am inspecting our DB globals in order to reduce sizes of the worst offenders if possible. When I come to a large global, I am interested which of its nodes are the largest. Hence code below with unexpected different results. Any explanations why are results different?

0 6
0 298

I'm working for an organisation that is running a very old version of InterSystems Cache (5.016) which runs on AIX . The last two times we have re-booted Cache, we have encountered rollbacks. I've been asked two questions. During the rollback it was "How long is it going to take?" and after the system returned, it was "So what caused it?". My answer to both was "I don't know".

0 4
0 316

I need to develop a tool to help to get what data is being consumed by a certain process, in order to get all data used to build an automated test scenario.

For example, some user process will pull data from ^GLOBAL(1)="dataString", ^GLOBAL(2)="dataString2", ^GLOBAL1(1)="data1String", ^GLOBAL2(4)="data2String4". Amidst all other data on these Globals, I will ignore everything that was not used in the user process, and get the specific keys used on it.

1 12
0 413

Hi,

We have a global with 65 million entries. All we are doing is just iterating through each entry to find out the total no of entries. It is currently taking 110 minutes. Is this something normal? What can we do to speed up this process? Below is the program for just iterating each entry in the global.

s sub=" ,count=0
f{
s sub=$o(^YYY(sub)) q:sub=""
s count= count +1
}
w!, "Total Count:"_ count

3 19
1 480

I have created a global say ^myglobal and entered some data. I am storing the name of global in databases and fetching the name based on some criteria. I am getting "^myglobal" in return from databases but i am not able to fetch the data I stored in the global.

I tried set var = result.global which gives me "^myglobal" in var. Doing WRITE var will return "^myglobal" and not the data i stored in this global.

3 5
1 314

We are trying to come up with huge DataStore which needs to store HIPAA transactions and Data getting partitioned with idkey - YYYYMM. Current Live data get inserted into current Month DB - HIPAA_202306. 10 years (Hipaa retention policy) old data is going to be sitting in to 120 DBs ( 201606_HIPAA, 201607... 202305) for historical audit legal compliance purposes.

Currently if we create Namespace we get 2 databases - CODEDB for routes/classes & DATADB for journals data.

0 7
0 343

Hello,

I would like to get a list of all globals that have been read or written during a given context. In Portal, there are counters in dashboard that give the number of read/write to globals in general.

What I am looking for :

- some handler (eg: like $ZTRAP) that will be called everytime something is read/written to a global.

- to activate a "global log mode" in Portal that will dump some information to a file (like ^ISCSOAP for SOAP requests).

1 2
0 244

I have a %GlobalBinaryStream object that I'm trying to save as a local file after being received through a SOAP Web Service.

To do this, I created a %Stream.FileBinary object and wanted to set where the stream copied to this object would be saved by using either the DefaultStreamDir() ClassMethod or the NewFileName() ClassMethod. However, the documentation isn't very helpful on how to use these ClassMethods.

Right now, I have the below code:

1 4
0 236
Question
· Mar 17, 2023
A confusing experience

During my last migration to IRIS I met this Compatibility parameter

  • NullSubscripts true
0 - Throw error when referencing a null subscript.
1 - Null subscript references do not throw an error.

The consequences are shocking. This was allowed:

2 5
0 306

Out of curiosity, I was looking in ^ROUTINE global to see how routines are stored internally.

I found out that lot of nodes are displaying "~pointer" as associated value (eg: instead of a string).

What are those pointers ? My guess is that it references some cache internal structure (eg: some nodes inside a B-Tree).

Is there a easily way to see what is behind ? Are pointers useful for user globals or is this something purely internal to Cache database ?

0 1
0 223

Hello community,

is there anything special to consider when running a foundation production regarding purge jobs (Ens.Util.Tasks.Purge)? I am thinking specifically of the QuickStreams, which according to my information are stored in a temporary database until the system is restarted. Since a system reboot is much less frequent then the purges, I wonder what happens to the QuickStreams whose messages and headers have already been purged. Is there a way to view Quickstreams (not content, but rather metadata) e.g. via the Management Portal?

Thanks for your comments and hints,

0 3
0 207

Hello All,

I have a class method on the DocRepo server that needs to query the data value of a global variable on the Edge server.

I have looked at the documentation for 'Global Structure,' but I didn't find anything that helped.

Global Structure | Using Globals | InterSystems IRIS Data Platform 2022.1

I am able to access this global easily from the Edge server using the $Get function, but I need to access it from the DocRepo server.

0 8
0 372

I am using $Query to loop through a global.

When I use $GET to get the data all we get back is the global name.

How do you get the value of the global after you have looped.

Below is my example in terminal.

Thank you in advance

Set node = $Query(^FromExtraMed(""))

w node
^FromExtraMed("A02",9220)

If i try w $GET(node) it returns

^FromExtraMed("A02",9220)

If i had this hardcoded it would have got the value

0 5
0 266

Hi there have been various posts around how to clean up globals without parent data but none have gone into how you solve these issues.

Our database is approaching 600gb in size so i am looking into how to reduce this.

We use standard purge tasks.

Our cache stream class has a global size of 2463243 from running global size so it is what i would like to tackle first.

1) is there any way i can find based on my oldest message session for where most of these globals

0 3
0 616