I use the following code to start a start a job :

Class MyClass Extends (...)
{
    ClassMethod Foo()
    {
       job $CLASSMETHOD("MyClass","MyMethod") //take forever depending hardware
    }

    ClassMethod MyMethod()
    {
       //do database related stuff
    }
}

On local environment, calling Foo() is instantaneous (a few ms). On production/test servers (which have much better hardware than local) calling this function is slow and take between 200 ms to 800 ms. Obviously starting a new job with "job" command take lot of time on those environments.

00
0 3 134

I am trying to figure out the best ObjectScript analog to mimic, more or less, the %RCOPY functionality. What would be ObjectScript  method(s) if any to copy a routine from the current namespace to another one and compile it there?

00
0 12 185

Hi developers, 

We've incorporated VS Code's support for multiple concurrent debug sessions and consoles into the latest release of Serenji

So if you're working with processes that relate or are dependent on each other, you can now debug them together. Just launch a second Serenji debug session (F5) whilst the first one is still active. 

This short video below shows how it works. We hope you find this feature useful! 

Laurel 

Serenji 3.2 multiple concurrent debug sessions

00
0 0 58

First of all thanks for your time and help reading this question:

We would need some help:

The use case is: to add a rule inside a EnsLib.HL7.MsgRouter.RoutingEngine, where we iterate in a EnsLib.HL7.Message to find a specified value inside all OBXs segments. It should return a Boolean

Is there any recommended way, or standard function inside Ensemble, that we could use, without having to develop a new function?

 

We have read:

10
0 5 119

Hello everyone, 

InterSystems Certification has redesigned their IRIS System Administration certification exam, and we again need input from our community to help validate the topics. Here's your chance to have your say in what topics are covered on the InterSystems IRIS System Administration Specialist exam! And, yes, we'd like to hear from you Caché admins too!

Here's the exam title and the definition:

InterSystems IRIS System Administration Specialist

An IT Professional who:

00
1 0 169

I would like to know if an encrypted caché database can run significantly slower than a normal "unencrypted" database, in a way that is noticeable to the end user (e.g. slower response time for most pages, especially the ones that rely on read/writing to globals).

I searched in Intersystems knowledge base and couldn't find anything related. I'm looking for possible before/after benchmarks.

00
0 3 119

The most recent release of Serenji features our innovative gj::locate technology. It was a standalone tool we originally created for a Developer Community contest earlier this year, but we've incorporated it into our debugger after some great feedback from developers. 

It works by navigating you directly to the source of your server-side errors in just a couple of clicks - enabling you to quickly fix errors without the need to count tedious lines of code... and let's be real, who has got time for that when you're under pressure to fix this bug? 

It's simple and straightforward to use:

1. Click on the gj::locate panel in the status bar

2. Enter the ObjectScript error message or line reference from a class/.mac routine..

3. gj::locate then does the work for you by taking you straight to the corresponding line in your source code.

Easy peasy... and with time to spare to make yourself a coffee before your deadline! 

The video below shows it in action - let us know if you've already given it a go. Or, if you're interested in trying it out we offer a free 30 day trial license, just drop me a message through the Developer Community or email us at info@georgejames.com.

Serenji 3.2.0 utilising gj::locate technology

20
0 0 72

 

i want to write a application for educational purposes which will be able to write,  read and store name , surnames and birthdays of patience in a database in Caché ObjectScript

this are the codes i have already written can someone help me out. 

 

00
0 9 267
Question
Michel Bruyère · Sep 30
Portal's category.

Hello,


I’m looking for a way to find out which category of portal a connector belongs to.
I looked at the class ‘Ens.Config.Production’ and ‘Ens.Config.Item’ but without success.


An idea about the ‘ObjectScript’ code to design?

Best Regards.

00
0 11 179

Hi developers, 

Serenji 3.2.0, the latest version from George James Software, was released last week and our current users have been enjoying trying out the new features (which you can find more about here). 

If you're thinking about trying Serenji for the first time, we've made it easier to get set up by adding a walkthrough on the VS Code Welcome page. It takes you through: 

  • Setting up the server components.
  • Selecting a server namespace.
  • Saving and extending your workspace.
  • Requesting a debug license (don't forget we offer a free 30 day trial!) 

We've also added prompts and guidance throughout VS Code to open and add Serenji folders to your workspace and when going to run and debug code. 

This is just one of the ways we've enhanced the Serenji debugger to make straightforward and easy to use - so all you need to do is focus on your code. 

Serenji 3.2.0 Welcome Page Walkthrough

10
0 0 85

We have the following code, but recently had a few issues with messages sent to downstream systems being rejected. 
After investigating, seems that the message being sent is being truncated, the RawContent that we are pulling from Ens.EnsLib_HL7.Message only has the first 10k of the message

We are storing message body IDs in a table, then when we receive later messages, we look up the corresponding record in the table, 
extract the message and alter some fields from the saved message based on the received message and send onto downstream systems

00
0 2 128

We just upgrade from cache 2016.2 to IRIS 2020.1.1.

After this upgrade we cannot access to the portal web management, and dont give errors about that just this:

09/28/21-15:59:16:654 (20192) 1 [Utility.Event] Private web server has not started after 5 seconds.

Is this normal? 

I followed the guide but dont talk nothing about that.

This is a normal problem when upgrading? 

 

Thanks!!

00
0 3 167

I am executing the command:

      set fileComp = ##Class(SYS.Database).FileCompact(obj.Directory, freeSpace, .actualFree)

      where obj.Directory contains the location of the current database

This executes correctly. However, the resultant OREF object does not contain any displayable properties but rather is of the value:

       "0 "_$lb($lb(380,,,,,,,,,$lb(,"%SYS",$lb("e^zFileCompact+38^SYS.Database.1^1","e^^^0"))))/* ERROR #380: Completed but skipped some blocks, details recorded in the console log. */

00
0 2 109

I am trying to convert a valid date range (Previous Day - Current Day) to a valid date/time range (-15 mins from current date/time to current date/time) for a Task to run (Format needs to be YYYY-MM-DD hh:mm:ss)

Code being used currently for date range is 

00
0 4 116

How to find a global's original namespace ? Potentially mapped from a different namespace .

I have a global ^Custom that exists in multiple namespaces but it could mapped from namespace Drone(A) to Launch(B)

Without access to Cache management portal how to find where is my global located using cache code ?

Like if ^Custom == ^[Drone]Custom ??

 

00
0 5 166

Our company is using Cache FDBMS for Medtrak.

I am trying to insert a record with the following data types : date, time, string and memo field (multiline).  The SQL insert/update works fine without the memo field.  

Here's my SQL statement

Insert into MR_SUB (MRSub_Date,MRSUB_Time,MRSUB_Update,MRSUB_Desc) values(:DTE, :time, :use, :remarks)

Based on FDBMS docs. MRSUB_Desc is a multiline/memo data type 

Hope somebody can help.  Thanks

 

 

 

 

00
0 6 166

I have a terminal script that queries sys.process' and then parses the results writing to a logfile. As part of the processing of the results, each row of the result set includes an element from the static string.  But I am not clear on the scoping of the static string. The write statement sees the static string as undefined. What I want is something to the affect:

     set statStr = "aa|bb|.."

   set sqlStatement = xxx

   set tState  = ##class(%SQL.Statement).%New()

   set qStat   = tState.%Prepare(< sql statement> )

00
0 2 125

[SQLCODE: <-400>:<Fatal error occurred>]
[Cache Error: <<MAXSTRING>zExecute+3^%sqlcq.LIM.cls1043369.1>]
[Location: <ServerLoop>]
[SQLCODE: <-400>:<Fatal error occurred>]
[Cache Error: <<MAXSTRING>zExecute+3^%sqlcq.LIM.cls1043369.1>]
[Location: <ServerLoop>]
   at InterSystems.Data.CacheClient.CacheADOConnection.GetServerError(Int32 rc)
   at InterSystems.Data.CacheClient.CacheADOConnection.processError(Int32 error, Int32 allowError)

00
0 3 154

Hi community,

I have a SOAP Client class that connect to a WS Service. This structure and configuration is the same for some providers that are integrated with my solution.

If I call to a provider, it returns the XML expected. But there is a provider that raises an error:

ERROR #6243: HTTP request to SOAP WebService returned response with unexpected CONTENT-TYPE: application/wsdl+xml

00
0 3 75

The latest release of Serenji by George James Software introduces zero configuration debugging, so it's ready to go in just one click - no matter where you are or what you're doing, your on-the-spot debugger is ready to go. 

We have introduced a host of new features to enhance the debugging experience so you can focus on identifying and fixing errors, without losing focus by spending time setting up a launch configuration. 

Check out the new features in our release notes

If you've already started using Serenji 3.2.0 let us know how you're getting on! 

30
2 0 115

i noticed -by reading .INT files of one class- that some of embedded sql select statements code blocks translates into code that uses lock command.

 

even if i use %nolock in the select, still cursors and arrow referencing notations "->" have the same results.

00
0 4 117

I am writing a report for a client that will create a report of the current process with a format that mimicks the Management Portal process display. I am writing a cterm script file to generate the report.

In the loop that process the results I am writing the columns in a formatted manner that will result in a CSV format very similar in content and order the process page. However, it appears that the write statement is limited in size such that I can not write out all of the elements of the sys.process query. My query result processing that works correctly is of this format:

00
0 4 97