Syndicate content 0  
 
All time

What changes are to be made while customizing a FHIR server package when adding a new field. As provided in the documentation, we have a sample JSON package of favorite color and it is added in the table, but when we are adding a new field 'Insurance', it does not imports the package and says package already exists. We have three files of JSON

1) Package.JSON

2) SearchParameter.JSON

3) StructureDefination.JSON

What should we have to change for adding new field.

0 2
0 219

Hey Community,

Enjoy watching the new video on InterSystems Developers YouTube:

⏯ Best Practices for InterSystems IRIS System Performance in the Cloud @ Global Summit 2023

https://www.youtube.com/embed/2nUzXjymRXs
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

1 0
0 221

I have a problem. Occasionally, I am getting locked out of IRIS because of password failures. However, the failures aren't necessarily related to my password. We are using VSCode, and I have installed one or two proposed APIs for use with the software (because that's just how I am; I want to learn the new stuff).

Today, I had that problem again. The step that caused the problem was most likely when I was trying to switch the branch I was using and updating within VSCode. Let's say I was switching from branch "1A" to branch "2B". When I did this, IRIS caught two password errors:

1 1
0 220

I'm trying to read data from a file and it contains single precision (4 byte) float values. Does Iris/Cache' have a way to convert the binary into a Cache' variable that is accurate?

ZW RECORD
RECORD="EDID"_$c(17,0)_"fLargeRefMinSize"_$c(0)_"DATA"_$c(4,0,0,0,0)_"DGMST&"_$c(0,0,0,0,0,0,0)_"d"_$c(14,0,0,30)_"h+"_$c(0)_"("_$c(0,0,0)_"EDID"_$c(22,0)_"fBribeSpeechcraftMult"_$c(0)_"DATA"_$c(4,0)_"ÍÌÌ=GMST"_$c(28,0,0,0,0,0,0,0)_"c"_$c(14,0,0,30)_"h+"_$c(0)_"("_$c(0,0,0)_"EDID"_$c(12)

The float DATA value for "f" LargeRefMinSize is $c(0,0,0,0) which is obviously 0.

0 6
0 215
Closed

Strong technical experience with InterSystems Cache Objects, XSLT is a must for this position.
Experience in CACHE/MUMPS technology.
Experience in IHE XCA, XDS.b profiles, CCDA exchange.
Experience in HL7 v2 messaging.
This position is good thru 2023 and very good possibility of extension if budget gets approved.
This position is for Pacific time hours.

0 0
0 221

How do I determine the size of an X12 message within the Rule Editor? I should add this is for HealthConnect or Ensemble.

The FullSize property always shows 122, and the FullSizeGet method isn't available within the Rule Editor.

Our vendor can't handle messages over 500,000 characters, so I need to write those to another queue for later processing, and to get the interface into they're system from crashing.

Thanks,

0 2
0 219

Hello everyone,

I am looking for a sort of REST interoperability adapter that can forward REST calls within HealthConnect. If necessary, we need to adjust the requests or responses.

For Fhir calls, we use the FHIR Interoperability Adapter. This works perfectly; a message comes in as HS.FHIRServer.Interop.Request, and a message HS.FHIRServer.Interop.Response goes out. I can make adjustments as needed to both the request and response. I am looking for the same functionality, but then for non-FHIR REST calls.

0 2
0 219

With the improvement of living standards, people pay more and more attention to physical health. And the healthy development of children has become more and more a topic of concern for parents. The child's physical development can be reflected from the child's height and weight. Therefore, it is of great significance to predict the height and weight in a timely manner.

Open Exchange app
1 0
1 221

Hey Developers,

Thank you so much for staying with InterSystems Developer Community for yet another year!

Day in and day out our team is trying to make it better and more useful for each and every one of our 12K+ members!

We'd like to know how useful the Developer Community is for you at this point. Please take a few moments to let us know what you think and what could be improved:

👉🏼 InterSystems Developer Community Annual Survey 2022 👈🏼

Note: The survey will take less than 5 minutes to complete.

4 1
1 201
Article
· Nov 28, 2022 2m read
Reviews on Open Exchange - #21

If one of your packages on OEX receives a review you get notified by OEX only own YOUR package.
The rating reflects the experience of the reviewer with the status found at the time of review.
It is kind of a snapshot and might have changed meanwhile.
Reviews by other members of the community are marked by * in the last column.

2 0
0 221
Article
· Nov 11, 2022 2m read
Reviews on Open Exchange - #19

If one of your packages on OEX receives a review you get notified by OEX only own YOUR package.
The rating reflects the experience of the reviewer with the status found at the time of review.
It is kind of a snapshot and might have changed meanwhile.
Reviews by other members of the community are marked by * in the last column.

1 0
0 221

Hi all,

I am currently wokring on integrating unit tests into a project. I am also attempting to test productions with the TestProductions class. This works great, but I noticed that no code coverage information is being gathered when I run the production tests?

Am I doing something wrong (forgot to add something in the coverage.list for instance) or is TestProduction not intended for code coverage?

Thanks!

1 0
1 221

Hi Community!

Enjoy watching the new video on InterSystems Developers YouTube:

⏯ Use Case: Connecting Devices to IRIS for Health to Improve Patient Care

https://www.youtube.com/embed/8ZtXCHZ6oaM
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

1 0
0 221

I've just been tempted to the option exchange (curiosity) and when browsing, I often right-click, and open links in a new tab, eventually ;-) I have enough interesting open tabs to go off and read the tabbed articles,

I can't do this in open exchange, it will only allow a direct click to open the url.

even worse, when I come back (to where I left off) It starts from the top of the page.

any chance of changing the url's to allow us to right click and open in a new tab

2 3
0 218
Question
· Sep 5, 2019
Ambiguous sort column error

Hello,

I have a small SQL question.

Running an example queries in our Samples Namespace:

1. select top 5 Description,Category from Cinema.Film order by Category - runs fine no issues and returns 2 columns as expected

2. select top 5 * from Cinema.Film order by Category - runs fine no issues and returns 8 columns as expected

3. select top 5 Description,Category,* from Cinema.Film order by ID - runs fine no issues, and returns 10 columns, with my first 2 repeated

4. When I try to combine the first 2 queries:

0 4
0 217
Announcement
· May 7, 2019
Bug in DC Email System

Hi Community!

Today and yesterday a lot of you received a strange email with the subject:

InterSystems Developers Publications, Week 29 of April - 05 of May, Digest

and body:

subscription|type|digest_w|post|461231|

This happened because of a bug in our email subsystem. I bring my apologies and we are fixing the bug at the moment.

0 0
0 221

Hi Community!

Here is the digest of what has happened on Open Exchange in November and December 2018!

Application Releases

We had 5 releases in November and December:

Cache ODBC for Node.js

This library aims to provide simple access to ODBC data sources for node.js.

Laracache

Laravel package providing InterSystems Cache as a data source using ODBC

DeepSeeButtons

Tool for analyzing your DeepSee Environment

DSW Reports

Addon for DeepSee Web which provides online reports and PDF emailing reports using InterSystems DeepSee dashboards

AnalyseThis

Utility to easily transform a CSV file into a personalized preview of DeepSee

0 0
0 221

Presenter: Tony Pepper
Task: Host an application based on InterSystems’ technology in a public cloud environment
Approach: Provide a checklist of things to think about before you deploy

Are you looking at hosting your applications in the public cloud? This talk will highlight what you need to think about when deploying InterSystems technology in any public cloud environment.

Content related to this session, including slides, video and additional learning content can be found here.

1 0
0 221

Hi Community!

We're happy to share the next video in the series dedicated to Gen AI on our InterSystems Developers YouTube:

⏯ Prompt before the prompt - third step of GenAI model training

https://www.youtube.com/embed/6mR1AQRR_G0
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

0 0
0 220

Hi guys,

How can call a clientMethod, Method or classMethod from a html component?

I've this hyperlink acting as a button in a zen page and onclick I've tried the below which is actually executing the function but failing to call the classMethod line, and is there a way to just call clientMethod instead of javascript ?

0 6
0 214
Question
· May 21, 2024
Join JSON responses

Good morning, 🙂

I would like to ask a question, which has to do with how to manage %GlobalCharacterStream representing JSONS.

Thank you for reading this question, thank you for your help, and thank you for your time and attention.

Specifically, in a certain Process, we were querying 2 Operations, whose response we were converting to a Property called "informesAutorizadosRangoFechas" (reportsAuthorizedInRangeDates) which is %GlobalCharacterStream whose content is a JSON with the same structure.

0 5
0 215

I am trying to locate a method that would allow me to differentiate between InterSystems preinstalled/system namespaces and "our own" namespaces. I am interested both in Cache and Iris answers if they are different. Yes, I can list what to disregard, like if not HSLIB or if not DOCBOOK but hoping for a more universal and elegant answer.

0 3
0 217

A report that I need to create - I need to write a class method that will execute a few queries and save the data to a class and then return the data in a result set that can be used in the Logi report as a Stored procedure.

I can create the class method that is a Stored procedure and do the queries and manipulate the data, however I am having an issue at the end of the method to return the fields back as a result set.

0 3
0 217

Hi Community,

Dive into the new video on InterSystems Developers YouTube:

⏯ Near Real-Time Analytics with InterSystems IRIS & Debezium Change Data Capture @ Global Summit 2023

https://www.youtube.com/embed/MdPSTatJo9I
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

1 0
0 220