I have a question about using OnInit() within a Ens.BusinessOperation.

When you include OnInit(), does OnInit() only execute when you start a Business Operation? Or does it execute OnInit () every time you send a REST request to the operation. I am trying to pinpoint when the best time is to execute the POST command to get the Token

I am needing to get a Bearer Token from a REST POST call and return the Authorization key prior to making the rest of the REST calls to pull down data.

0 13
0 249

Monitoring your IRIS deployment is crucial. With the deprecation of System Alert and Monitoring (SAM), a modern, scalable solution is necessary for real-time insights, early issue detection, and operational efficiency. This guide covers setting up Prometheus and Grafana in Kubernetes to monitor InterSystems IRIS effectively.

This guide assumes you already have an IRIS cluster deployed using the InterSystems Kubernetes Operator (IKO), which simplifies deployment, integration and mangement.

25 10
11 442
Question
· Jul 23, 2024
JWT and CORS

Hi

I'm trying to use JWT authentication on a REST application in IRIS. The login API are correctly "injected" into the application. Login works fine with Postman and other REST clients, and subsequent calls to my REST API using the bearer token work fine (correctly authenticated). So far, so good.

0 9
0 354

Hello, I want to create PDF from HTML source. I found pandoc. I installed pandoc on IRIS container image. I created Interoperability production. I have setup REST service to receive HTML file in request body. I call pandoc command pandoc -o output.pdf input.html from a BPL process. I copy output.pdf file stream into response body. I save the response at the source. I get a file named output.pdf but it does not load in Acrobat. I suspect I am doing something wrong with headers (accept-encoding?) or maybe do I need to base64 encode the pdf file to transfer it via REST?

0 7
0 223

Hi folks!

I'm building a very simple REST API.

But before testing it via a Web Server what I want to make sure that REST API methods work in principle.

Is it an easy way to "fake" the web-server request and get a result e.g. of the method with signature like that?

ClassMethod GetAllRecords(pRequest As %CSP.Request, pResponse As %CSP.Response) As %Status

e.g. calling it in Terminal?

0 6
0 148

Introduction

A REST API (Representational State Transfer) is an interface that allows different applications to communicate with each other through the HTTP protocol, using standard operations such as GET, POST, PUT, and DELETE. REST APIs are widely used in software development to expose services accessible by other applications, enabling integration between different systems.

71 6
4 400

Hi everybody,

I'm modifying a REST interface for a client but it seems impossible to me to modify HTTP Response Status and including custom HTTP Headers either.

My dispatch class (extending %CSP.REST) is contacted through a POST request and the latter is processed in a custom class (extending %CSP.REST as well) accessed as shown in the example below:

<Route Url="/test" Method="POST" Call="Custom.Test:Process" />

Within the processing class I tried executing the following statements with no success:

0 6
0 179

Hi developers!

Observing the avalanche of AI-driven and vibe-coding developer tools that have been appearing lately almost every month with more and more exciting dev features, I was puzzled whether it is possible to leverage it with InterSystems IRIS. At least to build a frontend. And the answer - yes! At least with the approach I followed.

Here is my recipe to prompt the UI vs InterSystems IRIS Backend:

  1. Have the REST API on the IRIS side, which reflects some Open API (swagger) spec.
  2. Generate the UI with any vibe-coding tool (e.g., Lovable) and point the UI to the REST API endpoint.
  3. Profit!

Here is the result of my own exercise - a 100% prompted UI vs IRIS REST API that allows to list, create, update delete entries of a persistent class (Open Exchange, frontend source, video):

What is the recipe in detail?

3 5
0 101

Background:

This guideline provides an overview of how to design and implement a REST API interface for querying patient demographic data from an Electronic Patient Record (EPR) system using HealthConnect. The process involves sending a query request with the patient's identification number, retrieving the response from the EPR system, extracting the required patient demographic data from the HL7 message, and sending it as a JSON response to the supplier. The high-level process diagram is shown below (Screenshot 1).

4 5
1 146

I have a primary dispatch class that implements %CSP.REST.AccessCheck() for some high level access checks before the route table forwards the request to the implementation classes which also implement %CSP.REST.AccessCheck() for some lower level access checks. The idea is that we know where we are in the implementation class and what the user is trying to do, so it makes more sense to check some lower level items there rather than trying to parse out the request at the dispatch class.

0 5
0 94

Hello everyone!

I have set up an EnsLib.REST.GenericService with an EnsLib.HTTP.InboundAdapter which forwards the http requests received by a web app to my Business Process.

I would like to parse HTTP multipart/form messages I am receving and be able to iterate over the various fields within the request body, accessing its content type and the content itself.

As far as I understand I should use the %Net.MIMEReader class which should return a list of %Net.MIMEPart, one for each field within the request. However if I do :

0 4
0 78

I deployed an IRIS REST application using Installer class. I think I created the namespace FEEDER database with %DB_Default resource and I used the same resource in Web Application roles. I allowed Unauthenticated Authentication method. I used ^%ISCLOG and reviewed ^ISCLOG. I do not understand why I get 403 Forbidden response.

0 4
0 47
Article
· Sep 22, 2024 5m read
Database Management Tool

Introduction

Managing databases and performing CRUD operations are fundamental tasks for developers building data-driven applications. While many database management systems (DBMS) exist, they can be complex and cumbersome to interact with, especially when it comes to creating databases and tables, handling constraints, and performing real-time data operations through an API.

8 4
0 243

Hi developers!

While developing web apps the security practice I consider safe and convenient is to create a special Role (e.g. equal application name) which contains security resources which application will need (SQL tables, priviledges, database access, etc) and assign it to the Web Application.
So the user gets this role once it loggs in to the application (via password, no password or delegated).

Convenient, right?

So, the question is, when I deploy the app as an IPM module what should I put as a database access?

0 4
0 50

I am trying to replicate a REST call that I am able to make via a Postman call within a EnsLib.REST.GenericOperation.

It's been a while since I have messed around with trying to make external REST calls. When I execute my REST call, tSC is coming back with an error and I am trying to pinpoint why. I tried turning on ISCLOG = 5 but when calling the REST Operation from the Testing tool it is not logging anything to the ISC log.

0 3
0 71
Question
· May 18
REST API Issue

I have a rest API Class used for getting data from Cache 2018 version.
I have single route '/callfuntions'
I send the following parameters to the API :- className, methodName, params
I use $CLASSMETHOD to execute and send the result back to the client.

If I make more that 10 to 12 requests in quick succession, then it stops sending data.

0 3
0 65

Introduction

InterSystems IRIS allows you to build REST APIs using ObjectScript classes and the %CSP.REST framework. This enables the development of modern services to expose data for web apps, mobile apps, or system integrations.

In this article, you'll learn how to create a basic REST API in InterSystems IRIS, including:

3 3
1 41

I have a scenario where I send a GET request to a broker and receive a FHIR response. When I attempted to use the built-in InterSystems functions to convert this FHIR response into SDA, the transformation failed—likely because it is not a standard FHIR request.

How should I handle this situation? Is there a recommended approach to processing FHIR responses in this context?

0 3
0 77