Representational state transfer (REST) is a software architectural style that defines a set of constraints to be used for creating Web services. Web services that conform to the REST architectural style, called RESTful Web services (RWS), provide interoperability between computer systems on the Internet. RESTful Web services allow the requesting systems to access and manipulate textual representations of Web resources by using a uniform and predefined set of stateless operations. Other kinds of Web services, such as SOAP Web services, expose their own arbitrary sets of operations.
I have the following setup: REST broker calls inProc BO via BS. As BO initialization is time-consuming, I want to reuse the same BO during the CSP process lifetime.
Hello everyone! So, I am supposed to receive a REST-request into my production, and I need to send it, exactly as I received it, to another server. I am struggling to find any good info on this, and have a hard time coming up with a good approach. What would be the easiest way to do this? - I have so far thought about possibly doing it with an EnsLib.REST.GenericService and then sending it with an EnsLib.REST.GenericOperation.
I am working on my first REST operation to send a API Request to an internal server within our Network. I have finally got past the point of being able to connect using a SSL/TLS Configuration, but I am getting a ERROR <Ens>ErrHTTPStatus: Received non-OK status 403 from remote HTTP server: 'HTTP/1.1 403 Forbidden'.
It is clear how to get the request header value with a specific name:
Class My.RestController Extends %CSP.REST
{
ClassMethod processRequest() As %Status
{
#dim request as %CSP.Request
set request = %request
set h = ##class(%REST.Impl).%GetHeader("...")
...
return $$$OK
}
But I can't figure out how to enumerate ALL the request headers (and also get all values).
I'm trying to configure a new interface that reads HL7, transform them into FHIR messages and then send POST or PUT or DELETE depending on HL7 doc type.
1-I added an HL7 TCP service that reads ADTs messages
2a-Send ADTs to a process to transform them into SDA (using the following command: do ##class(HS.Gateway.HL7.HL7ToSDA3).GetSDA(request,.con))
2b-Extract the patient MRN and add it to the AdditionalInfo property (using the following request message class: HS.Message.XMLMessage)
I am trying to use postman to start the restapi classes from a json openapi2.0.0 file.
POST: https://myserver.com/api/mgmnt/v2/requestAPI. The body contains the openapi2.0.0. The application api/mgmnt has in security settings: password. JWT is not selected. I set postman authentication to basis authentication and gave username and password. I also set in headers IRISUsername and IRISPassword. I have 401 Unauthorized.
Is the only way to go through is to build an oauth token? or do I miss something?
As you know, it is very complicated to debug a Business Service Rest API because the object is created when the applications receive a request, so we cannot have the JobId that we can use to debug.
I have a scenario where I recognize that I have a duplicate patient in FHIR , both have a different set of data attached to them (Specimens / Observations / Conditions) and I want to transfer all the data from patient X to patient Y, and maybe mark patient X as not relevant or delete it IDK yet.
since Patch currently supports only single patch,
"The Conditional Patch query identified more than one resource."
After installing IRIS 2023.1 on a live copy of our production machine our REST Service now consumes a CSP Session with every request. The request is handled as expected, but uses one of the 5 CSP Session per license. So after 25 requests, the license is used up. The Grace time always shows 0 and the session stay for very long. (Maybe the 900 Seconds timeout). On Caché 2018, we had the same settings for the Webapp and there, only a single Session was set for all requests. The Caché request didn't use any cookies.
Still working on my first External REST API call, and I am struggling to find the exact answer I am looking for... I get a JSON response from my API call but I am not quite sure how to dynamically get the JSON response into the Ens.Response Object with its lists of Arrays that I have defined.
set tSC = ..Adapter.SendFormDataArray(.tHTTPResposne,"POST",tHTTPRequest,,,tURL)
I want to call the REST endpoint and return the list of objects. I`ve created the method but it displays an error: <METHOD DOES NOT EXIST>GetAllPersons+10^Lab3.RestClient.1 *Count,%ZEN.proxyObject
I am looking for a sort of REST interoperability adapter that can forward REST calls within HealthConnect. If necessary, we need to adjust the requests or responses.
For Fhir calls, we use the FHIR Interoperability Adapter. This works perfectly; a message comes in as HS.FHIRServer.Interop.Request, and a message HS.FHIRServer.Interop.Response goes out. I can make adjustments as needed to both the request and response. I am looking for the same functionality, but then for non-FHIR REST calls.
I have tried many methods from super classes of %CSP.REST but I can't find a method I can override that will run after the %response object is created so I can set a header that is common to each implementation method. It's one line of code in each method to set the header but it would like to make it super easy, simple and just have a method that runs on, before, after the implementation method to set this common header (we want to return the API version in each responses HTTP headers.
Hello everyone! I have to build a REST service that receives a POST HTTP-request, collect a file from that request in the Form data and then send it in another HTTP Post request through Form Data. However I can't really seem to send the file, and I do not know where it has gone wrong. All I am getting told is that no file is being received from my HTTP Post request. I am reaching the REST Service I am supposed to send the request to, but nothing is being sent.
I have a production with a HLv2 HTTP Listener.
For demo purposes, I need to send HL7 messages directly from a browser. Here is an example (React/typescript):
Is there any way to avoid generating the built in validation inside the classmethod from the .disp class definition. I've added the resource with path parameter as integer in swagger 2.0 open API. The class method(in my case getRandom is the class method) inside .disp handles the integer validation by default. Is there a way to avoid/remove by default.
For a requirement of the customer, we have a BS Rest api with a lot of methods, we need to get the IP of the caller, the method and what is the time that the API has taken to process.
I've found the event onPreDispatch where I can take the IP, ClassMethod, etc.. I'm using a global variable to save this information.
Thank you very much for reading the doubt and above all thank you very much for answering.
Given the following use case:
If we have a Destination Service that through a HTTP GET by REST gives us a certain JSON response, where it should be noted that it is a list of objects where each object in the list does NOT have a key:
I am trying to connect the external application. Authenticating via Two SSL,
I have the Client Cert, Private key and the Root Certificate
The connection is successful from local (both via terminal and as well via Postman)
But when trying from IRIS application by configuring the certificates in the SSL configuration, i am not able to successfully verify the SSl connections
When test from the ssl configuration with the endpoint and port its gives the error Error #988: SSL connection failed. SSL/TLS error in SSL_read(), SSL_ERROR_SYSCALL: I/O error (54)
Hello everyone! I am wondering how I can retrieve multipart form-data from a request that is coming into my REST-service. I am supposed to retrieve a string and a file. The file is being retrieved without issues, but the "testprofile" string is not being retrieved at all. It just logs a an empty entry. The request that is sent to my REST-service has the Content-Type: multipart/form-data Thanks beforehand for the help! :)
Down below is the code I use right now to retrieve the string and file from Form-data Rest HTTP-request to my service.
I want to develop a web application in which a user can log in through the user credential of intersystems that is created in Management Portal for a specific role. How can I authenticate the user and get any token or login cookie through which user can call other apis
Hello everyone! I need to build something that will receive a REST request. As of now I have tried my luck with using an EnsLib.HTTP.InboundAdapter. But i am not so sure how I am supposed to configure it to be able to receive the REST request together with the JSON body. I have specified the OnProcessInput in the adapter so that it receives a GlobalCharacterStream. However, I have not had any good luck finding out to actually make the request to the EnsLib.HTTP.InboundAdapter.
Hello everyone! I am receiving a HTTP multipart/form-data request into my rest service. How can I read the values for each Key in the form? The key "Profile" is sent to my service as a String data type. The code I have below does not seem to work, where I try to read the Key profile in the form.
I built my rest api with ^%REST and update with CreateApplication. Postman works fine and I suppose production server will work fine as UI and rest api will be on the same domain, but for now in dev, I need to have access from my local to the Iris rest api. I have a CORS error.
I do not know how to configure my swagger file to have either Parameter HandleCorsRequest=1 or <route Cors=true in the generated displ,cls.
By likes.png)
.png)