New post

#Performance

6

Performance tag groups posts regarding software performance issues and the best practices on solving and monitoring performance issues.

We have a data transformation where source is object collection (populated from a json file) and target is EnsLib.EDI.XML.Document.

If source file is large enough, transformation fails and we get <store> error and I quickly found this:

https://docs.intersystems.com/irislatest/csp/docbook/DocBook.UI.Page.cls?KEY=EBPLR_DTL_foreach which at the bottom in "Avoiding <STORE> Errors with Large Messages" section tells to:

1 1
0 382
Question
· Nov 5, 2017
TPC-E in Caché

I work in a small development company that uses Caché as a database. In some support cases I have doubts about whether the client's infrastructure environment is not affecting Caché's response time. Reading a bit about comparing installations in different environments, both in production as testing and homologation environments , I understood that the TPC-E is a benchmarking method accepted in the market.

0 4
0 365

While I can see the benefits that $ZSTORAGE could have if used properly, I have not seen it used in the environments I have worked in. I was wondering if there are any developers that promote its usage.

If used properly, I would imagine it could be highly effective in maximizing free memory since some processes will never go over X amount, while others may very well need much more.

0 2
0 363

Running cache 5.0.21 64 bit on Windows server 2016 in virtual environment. Trying to understand why every single process disk read speed (simple sql data walks) caps around ~20MB/s, however 2 paralell such tasks on different data areas can reach 19MB/s each, four - 17MB/s each, that is 70MB/s total, etc. Also simple copy file to nul on that system reach ~400MB/s.

What can keep single query on idle system from reaching for example 200MB/s? Virtualization? Windows? Cache? Processors are below 1-3%

0 4
0 335
Question
· Aug 10, 2018
using Microsoft diskspd

Hi,

Has anyone got any experience of using the Microsoft diskspd utility to test the storage infrastructure in Healthshare/Ensemble environment.

I am interested in getting some figures to highlight any issues with different approaches to provisioning the disks on our new environment.

I am at a loss as to what parameters I should use to give a reasonable synthetic load that will give me any indication of potential issues. Any pointers would be greatly appreciated!

Kind Regards,

Jason

0 3
0 312
Question
· May 21, 2020
why http performance so bad?

Hi,

iris version: IRIS for UNIX (Ubuntu Server LTS for x86-64 Containers) 2019.4 (Build 383U) Fri Dec 6 2019 08:49:54 EST

os: Ubuntu 18.04 LTS

memory: 16G

Disk: 256G SSD

Iris config: default.

soft/hard limit: 65535

I build follow simplest flow to do performance test.

1. create A EnsLib.HTTP.GenericService name it IncomingHTTPService listen on 9980

checked create connection per request

Keepalived = 0

Qsize = 1000

0 5
0 297

I would like to know if an encrypted caché database can run significantly slower than a normal "unencrypted" database, in a way that is noticeable to the end user (e.g. slower response time for most pages, especially the ones that rely on read/writing to globals).

I searched in Intersystems knowledge base and couldn't find anything related. I'm looking for possible before/after benchmarks.

0 3
0 265

There is several classes that allow to create TCP/IP connections (eg: to connect to a service).

Example : %Net.FtpSession (port 21), %Net.HttpRequest (usually port 80 or 443)

AFAIK connection will stay open unless closed explicitly or if variable that hold the instance is garbage collected.

Is there a way to get a list of all active (open) TCP/IP connections IRIS is maintaining so far ?

0 6
0 257
Question
· Oct 17, 2018
SQLGateWay performance.

I have a ZEN page with nine tablepanes. Each tablepane queries a table in the same SQLServer db. I have a single SQLGateWay(odbc) to this SQLServer db. I need to get better performance when I query all nine table at the same time. Would my performance improve if I had nine SQLGateWays(nine odbc configurations/connections), one for each query? I would appreciate any and all suggestions for getting the very best performance when using SQLGateWays. Thank you.

0 1
0 257

I use the following code to start a start a job :

Class MyClass Extends (...)
{
    ClassMethod Foo()
    {
       job $CLASSMETHOD("MyClass","MyMethod") //take forever depending hardware
    }

    ClassMethod MyMethod()
    {
       //do database related stuff
    }
}

On local environment, calling Foo() is instantaneous (a few ms). On production/test servers (which have much better hardware than local) calling this function is slow and take between 200 ms to 800 ms. Obviously starting a new job with "job" command take lot of time on those environments.

0 3
0 257
Question
· Sep 13, 2021
SQL - use specific index

Hello Community,

we want to use a specific index on our sql-class.

The index we want to use is called "iFilter".
Currently we use the following technique of ignoring all other indices because the automatically chosen index is always too slow.

0 3
1 250

Hi all.

A long time ago I enabled Activity Monitoring to be able to save myself headaches in the future when looking at the performance of various message routes through our productions. It's served it's purpose of answering questions on how many messages we process a week etc but I had not had the chance to really dig down into the stats for specific message types or destinations to pin point issues.

0 3
0 240

In the context of IKO (Iris Kubernetes Operator) the question of Service not redirecting dynamically to the correct Pod is still pending.
In production this can be dangerous since an overload (or any other simpler problem) can cause you to change the main Pod and leave the application inoperable until we intervene.

Intersystems support warned that this is still an issue of IKO, but there are some possibilities that I am studying.

To explore an idea I had, I would like the help of this Forum to answer the following question:

0 3
0 234

Want to perform SNMP performance monitoring of cache2010 on AIX 5.3. Since the SNMP service that comes with AIX does not support agentX, it cannot extend the support for cache database. Therefore, I plan to deploy net-snmp on AIX first, then enable agentX, and finally configure cache's subagent. Is this workable? Any documents? Thx!

0 1
0 230

We are seeing more and more customers being lured with latest infrastructure technologies, particularly Composable Infrastructure. Coming with all sorts of data center consolidations and costs savings.

Question is: are there any concerns for HealthShare/TrakCare being run on these platforms or things to look out for? Anyone out there, already on these platforms?

To be more specific this is HPe Synergy with 480 Compute blades booting as bare metal.

Regards;

Anzelem.

0 3
0 222

Hello,

I would like to get a list of all globals that have been read or written during a given context. In Portal, there are counters in dashboard that give the number of read/write to globals in general.

What I am looking for :

- some handler (eg: like $ZTRAP) that will be called everytime something is read/written to a global.

- to activate a "global log mode" in Portal that will dump some information to a file (like ^ISCSOAP for SOAP requests).

1 2
0 201

Hello everyone!

Some time ago, I changed the configuration in SQL Runtime Statistic to "Turn on Stats code generation to gather stats at the Open and Close of a query". With this change, the CACHE base (cache/mgr/cache/) has grown a lot to reach 198GB.

Yesterday, I returned the configuration of SQL Runtime Statistic to the default which is "Turn off Stats code generation" and the cache base is no longer growing.

My question is?

0 3
0 170