#ObjectScript

I added extra OBX segments and I need to renumber OBX 4 so they are sequential.

Say I have an ObjectScript object called Book. It has 2 properties title and author. It extends JSON.%Adaptor, so I can call book.%JSONExport() and get this output:

In my web service I want to have a search function that returns an array of Books along with the total number of responses, like this: 

Introduction

If you're solving complex problems in ObjectScript, you probably have a lot of code that works with %Status values. If you have interacted with persistent classes from an object perspective (%Save, %OpenId, etc.), you have almost certainly seen them. A %Status provides a wrapper around a localizable error message in InterSystems' platforms. An OK status ($$$OK) is just equal to 1, whereas a bad status ($$$ERROR(errorcode,arguments...)) is represented as a 0 followed by a space followed by a $ListBuild list with structured information about the error. $System.Status (see class reference) provides several handy APIs for working with %Status values; the class reference is helpful and I won't bother duplicating it here. There have been a few other useful articles/questions on the topic as well (see links at the end). My focus in this article will be on a few debugging tricks techniques rather than coding best practices (again, if you're looking for those, see links at the end).

Hello Community,

The subroutine ^routine is not executed while the queue is being processed in WorkMgr. However, it works when defined as a function. Is it mandatory to define subroutine^routine as a function for it to execute properly?

Hey everyone.

I'm currently looking at a process where we're utilising the Class Ens.StreamContainer, and was looking to do some deletions outside of any purge routines.

Having been burned before, I wanted to make sure that deleting the container also deletes the contents within.

From looking in the class, the  %OnDelete ClassMethod appears to be removing an index from a search table and nothing more.

Am I looking in the right place, or is there a extended class for Ens.StreamContainer that does in fact delete the %Stream.Object
contained within the Ens.StreamContainer?

I need to add an extra blank OBX segment after a segment containing text, Total Cost:

I get the OBX segment but it is in incorrect location.

It should be after the line containing Total Cost:

It needs to contain:

OBX|1|TX|2000.02^REASON FOR REQUEST^AS4|

code:

I'm exploring this right now: given a bunch of types defined as Pydantic models, how can I come up with an equivalent %RegisteredObject/%SerialObject and convert to/from (e.g., to support persistence and match validation as much as possible)?

People who know Python better than I do (e.g., your average undergraduate from this decade): is this a stupid idea or a cool idea? Has anyone else done this before?

To VSCode experts - see the screenshot. When right-click on a method with intentions to proceed to the source code:

I am always confused about what to choose: declaration or definition. What is the difference?

Is there a way to use a property of the type %Persistent class in a %ZEN.Component.page class?
Example:

// Data classClass PersistentClass Extends %Persistent
{
    Property Value As%String;
}

// Page classClass ClassName Extends%ZEN.Component.page
{
  Property TestProperty As PersistentClass; 
}

The problem is that when using it the described in the example.
The property can be set in a Method like this:

Is there a generic process for "walking" the structure of a virtual document - eg an HL7 message (EnsLib.HL7.Message) or an XML document (EnsLib.EDI.XML.Document).

At least we'd want to be able to visit all "nodes" (HL7 fields or sub-fields, XML nodes) in the virtual document and be able to work out/generate the Property Path (so we could call "GetValueAt"). 

We can just about come up with something generic for HL7, since it only nests down to 4 levels within each segment, though we're using numeric Property Path's at that point rather than symbolic ones (MSH:1.3 etc).

Hello again IRIS community,

We have officially released our InterSystems IRIS Developer Professional certification exam for beta testing. The beta test will be available until April 20, 2025. As a beta tester, you have the chance to earn the certification for free!

Interested in beta testing? See the InterSystems IRIS Developer Professional Beta Test Developer Community post for exam details, recommended preparation, and instructions on how to schedule and take the beta exam. 

Thank you!

I was using VSCode to edit a DTL because it seemed easier to copy/paste code from parts of the DTL I was editing. I tried to add <sql> tag and code to call a SELECT statement, but when I compiled I got the following error...

ERROR <Ens>ErrInvalidDTL: Invalid DTL

  > ERROR #5490: Error running generator for method 'GetSourceDocType:osuwmc.Epic.MFN.DTL.EpicMFN949002Normalization'

ERROR: Ens.DataTransformDTL.cls(GetSourceDocType) of generated code compiling subclass 'osuwmc.Epic.MFN.DTL.EpicMFN949002Normalization'

InterSystems FAQ rubric

This can be done with TRY-CATCH:

#dim ex As%Exception.AbstractExceptionTRY {
    //Code that causes an error
  }
  CATCH ex {
     do ex.Log()
  }

If you use ^%ETN, call it from the BACK entry (BACK^%ETN).

Please also take a look at the related article: How to get application errors (^ERRORS) using a command

Perhaps this is an issue that has long been discussed somewhere. I have searched for it but still could not find the solution anywhere. In our environment, we send a container of SDA objects to UCR from HealthConnect. To populate the container we do a SQL query on a source system and then populate the appropriate SDA objects. Sometimes it happens that I want to do an update of a field and I want to empty the corresponding SDA field. In other words, send an empty string. The Alert.toTime field of the object in question is filled with the date '2022-11-29Z13:00:00'. I have tried the following

I have the need to query an external database and write the result set/snapshot to an internal %Persistent [ DdlAllowed ] table that I built. I have built inbound SQL Services before and write them externally to replace SSIS jobs, but how would querying a database via a Service and writing the data to an internal table work?

Can I just take the inbound query structure and write it to the class file of the internal table in a DTL? If so, what would be the Target? Or does this need to be done within a BPL as a Code block?

For programmers new to ObjectScript, one question will inevitably arise: “What is the difference between methods and class methods?” A typical answer would be: “A class method applies to a class, but a method applies to an instance of that class.” While that answer is correct, it lacks important information on how these methods differ, and how they are used in ObjectScript. Many things could be written as either. For instance, suppose we had a class called “User.Person” with a property called “Name”. If we wanted to create a method to write that name, we could do either of the following:
 

Introduction

A REST API (Representational State Transfer) is an interface that allows different applications to communicate with each other through the HTTP protocol, using standard operations such as GET, POST, PUT, and DELETE. REST APIs are widely used in software development to expose services accessible by other applications, enabling integration between different systems.

However, to ensure that APIs are easy to understand and use, good documentation is essential. This is where OpenAPI comes in.

My query that I am running on my Custom SQL Inbound Service has columns that are larger than the typical string length. How do I enlarge the SQL Snapshot Column limitations 

I want to append items to the list inside a for loop

Example:

set mylist = $ListBuild()
for i = 1:1:5 {
    set item = "item"_i
    set mylist = $ListBuild(mylist,item)
}

zw mylist

The output should be:

mylist = $lb("item1", "item2", "item3", "itme4", "item5")

The code snippet written above is not working, looking for correct way to do it.

Intro

In the process of trying to get more familiar with Objectscript I decided to try to build a general priority queue since I wasn't able to find an implementation anywhere. My though process for implementing this followed this general path.

Binary Heap

My first though to try to make this work quickly was to implement a binary heap and my first attempt at this used a multidimensional to build it. This version was relatively efficient, worked for strings/numbers natively, and worked for objects be letting the user override the comparitor.

Hello, dear colleagues.

I need to connect to a remote JavaGateway from an Ensemble service.

I am trying to use the EnsLib.JavaGateway.Service with a remote host where the JVM is running.

I can successfully ping the remote Java Gateway from EnsLib.JavaGateway.Service, and Ensemble reports that the service status is OK.

There are no network issues, and all necessary ports are accessible.

My requests work without any problems when I specify localhost in EnsLib.JavaGateway.Service. However, when I specify a remote JVM, I get the following error:

Hi colleagues!

Yet another time I figured that there is no super-simple way to display error from %Status variable, but I need it relatively often in a terminal.

Yes, I know about $$$ Macro, but they are not superhelpful in a terminal.

My usual behavior is to try to remember by heart or copy from somewhere the formula:

USER>w $System.Status.DisplayError(st)

I have created a class file that I want to execute daily to gather Metrics (Message Header, Space Available, etc..) and write the data into a Cache table. Now that I have written the class I want to add it to the Task Scheduler within Ensemble to run every morning. How do I go about getting the class file created as a Task within the Task Scheduler? The Documentation isn't as clear cut for creating custom tasks as one would expect.

I already mentioned in a Previous post I am trying to build a list from a repeatable field within a HL7 message. I figured out how to build the list by using a context list string variable within the Business Process (BPL) and doing a

do context.<variable>.Insert = <value>

 when I am looping through the field. I want to do it one step farther though... I want to search the list to see if the value exists before I do the insert. I only want to insert if the value is different than what is in the list already.

I have a repeatable field within HL7 that I want to create a List from. Do I have to initialize the List by using $LB, or can I just use $LI to keep adding on to the end of the list as it is looping through the field?

I was thinking about how to create a new parameter in a method, similar to Output or ByRef...

What documentation can I read to learn more about this?

I want to create a parameter customized.

I have been trying to get to grips with the new dot Net Gateway used in IRIS as the import of the DLL to construct proxy classes is no longer supported in IRIS I have a third party DLL that when I try to instantiate throws an error complaining about the class not instantiated as it does not support parameterless constructor .I am using this new 

set gateway = $system.external.getDotNetGateway()
do gateway.addToPath(myPath_"\DotNetGatewaySamples.dll")

Hi - Recently I have been investigating an annoying situation whilst editing ObjectScript classes or routines in VSCode.

What was happening to me was, as I was typing in lines of code into my class (for example, adding a new Method, or changing the Class signature, or a block of code),  this would quickly get syntax checked, re-formatted, and compiled - inevitably, (since I would be mid-way through my typing), this would generate compilation errors.

The question is straight forward. Is there a way to do that? I've searched docs but no result

Hello, I try to develop a REST interface where I need to interact with legacy MUMPS routines. How can I pass in input to a Read without modifying the legacy code?

I think in linux I can execute command < inputfile to read from file, but how does it work in ObjectScript?