Hi,

We’re launching an Early Access Program for an upcoming Table Partitioning feature that will help IRIS customers manage very large tables, and distribute row data and associated indices across databases and storage tiers. Table Partitioning cuts deep into the core of IRIS relational data management, so we want to make sure we get things right through working with a few engaged customers who can provide feedback on the initial deliverables, and fine-tune as needed.

If you are working with very large relational datasets, looking for more operational efficiency, and willing to roll up your

I want to extract data from IRIS (Health Share Provider Directory) and write the data out to a file that I can use within an external system. Using EnsLib.SQL.Service.GenericService do I need to supply Credentials if I am querying IRIS locally? I have always used JDBC to connect externally when creating Services and Operations to read/write SQL data from external Databases, but never internally. Normally I would just use sql or code to pull the data within a Process or DTC. But in this case, I want the Service to drive the workflow, and query the data from Local Tables

Using a Workflow Task within HealthShare Provider Directory, when a user clicks on Resubmit message within my Business Process, I check the status of the response. If the response is "Resend Message", I have my Business Process executing the following...

set tSC = ##class(Ens.MessageHeader).ResendDuplicatedMessage(context.SessionID)
 if$$$ISERR(tSC) $$$LOGSTATUS(tSC)

the context.SessionID is the Session ID of the message as it is being pass thru the Business Process. Does anyone see why that would not work off hand?

Hello everyone.

I have a question regarding the priority when applying a default configuration.

I have several Business Services that use the same class, so I want them all to have a common "Schedule" configuration.

However, there's one that I don't want this default configuration applied to, so I've tried setting the Schedule value to empty for that element based on its name:

In this case, the elements that use the class Kurro.BS.SFTP.Marca have the default value "CargaFicheros".

However, one of the elements (Kurro.BS.SFTP.Special) should not have this configuration, so I have created

I have an Embedded Python method, which is essentially a call to one third-party module.

Most of the time, the method takes <0.1 seconds to execute, but sometimes it takes 30 or 60 seconds.

The server is relatively idle (20-30% CPU load).

How can I debug this issue further? Ideally, I want to know where this library spends the time. The library is mainly Python code (it's boto3, so it's not a Python C API proxy library).

Table of Contents

1. Introduction
2. Version Control
3. Exporting Classes
4. Exporting BI Analytics classes
5. Exporting globals

Introduction.

In this article, we'll cover a quick start to Git development with the InterSystems Developer Community and version control practices when working with IRIS InterSystems. We'll cover scenarios where we need to export Interoperability classes, globals, and analytics elements such as cubes and dashboards. These scenarios encompass key version control practices with IRIS.

To get started, you'll need:

1. Register and log in to GitHub
2. Be a member of the intersystems-community organization on Git

Getting started with IRIS InterSystems is very simple!

For the question in the Title, the AI Chat gave a response of:

The ‘Current Users’ value displayed by the $System.License.ShowSummary() method represents 
real-time license usage tracked in shared memory on the local system.

We are trying to reconcile which user/process are associated with the counts that are returned.

Does anyone know how to get the detail of 'license usage tracked in shared memory on the local system.'?

Thanks you for your time.

- Patrick

Hello Community! As another great year comes to a close, I wanted to notify you about an upcoming change to the vscode-objectscript extension. In an effort to reduce the extension's footprint, simplify maintenance, and improve ease of use, InterSystems plans to remove some rarely-used configuration settings. Our telemetry tells us that these settings are changed from the default by fewer than 2% of users. However, before finalizing the removal I would like to give any users of these settings the opportunity to explain why a setting shouldn't be removed. The list of all settings that are planne

It was encouraging to see more people building VS Code extensions for the recent contest. However I noticed that of of the three extensions requiring credentials with which to make their connections only mine, gj :: dataLoader, leverages the long-established and officially-supported InterSystems Server Manager extension to obtain the connection definitions and to handle credentials securely.

Apache Airflow is the leading open-source platform to programmatically author, schedule, and monitor data pipelines and workflows using Python. Workflows are defined as code (DAGs), making them version-controlled, testable, and reusable. With a rich UI, 100+ built-in operators, dynamic task generation, and native support for cloud providers, Airflow powers ETL/ELT, ML pipelines, and batch jobs at companies like Airbnb, Netflix, and Spotify.

Airflow Application Layout

I use $SELECT() in Architect to aggregate various data conditions into a single dimension.

I have a data table like this: id, user, userData1, userData2...

Where each user action is the %Integer ID of that action from some source. Then in expression field i use: $SELECT(userAction1:"This user action", userAction2:"That user action"...) and so on, up to 14 conditions, excluding the default placeholder 1:"Other" (which is always empty because there is a condition with 100% chance). The logic is simple: if userAction1 is not null then SELECT return "This user action" and so on. The end result i

Introduction

In today's rapidly evolving threat landscape, organizations deploying mission-critical applications must implement robust security architectures that protect sensitive data while maintaining high availability and performance. This is especially crucial for enterprises utilizing advanced database management systems like InterSystems IRIS, which often powers applications handling highly sensitive healthcare, financial, or personal data.

This article details a comprehensive, multi-layered security architecture for deploying InterSystems IRIS clusters on AWS using Kubernetes (EKS) a

Hey Community!

We're happy to share a new video from our InterSystems Developers YouTube:

⏯  SQL Tricks and Tips @ Ready 2025

Given a JSON schema at runtime, I want to programmatically create persistent classes with corresponding properties and indices. Is there a way to dynamically compile and load such classes?

Hello Community! 👋
Welcome to the second part of the IRIS IO Utility series. This extension represents my submission for the InterSystems "Bringing Ideas to Reality" Contest 2025 and offers you an intuitive and powerful interface for importing and exporting data directly inside VS Code.

• You can find the extension on my GitHub page: pietrodileo/iris_io_utility
• VSIX file to install the extension on VSCode can be found on the related release page: releases: iris-io-utility

If you find this extension useful, please consider voting for me at the contest!

In the previous article, we cov

Hi everyone. Long time no see. Again, I would like to share what I am studying recently Create Foreign Tables Using SQL via JDBC.

Since I am learning about the IRIS BI at the same time, so I started with this Sample-BI docker environment

https://github.com/intersystems/Samples-BI

After starting the environment, login to the management portal http://localhost:52773/csp/sys/UtilHome.csp  with the user Superuser.

Switch the namespace to IRISAPP.

😀 We will find out that all the sample data are stored in this namespace IRISAPP. Let's find a simple table for testing the Foreign Table fe

Introduction

As AI-driven automation becomes an essential part of modern information systems, integrating AI capabilities into existing platforms should be seamless and efficient. The IRIS Agent project showcases how generative AI can work effortlessly with InterSystems IRIS, leveraging its powerful interoperability framework—without the need to learn Python or build separate AI workflows from scratch.
This project explores how ChatGPT and Anthropic Claude, two of the most advanced AI models, can interact with IRIS using Custom GPTs and the Model Context Protocol (MCP). Rather than creating

InterSystems FAQ rubric

Too run SQL in Terminal use $system.SQL.Shell().

Please refer to the sample below.

SAMPLES>do $System.SQL.Shell()
SQL Command Line Shell
---------------------------------------------------- The command prefix is currently set to: <>.
Enter q to quit, ? for help.
SAMPLES>>select * from Sample.Vendor
1. select * from Sample.Vendor Vendor Balance Contact DaysClear DiscDays DiscRate LastInvDate LastPayDate MinPayment Name NetDays PayFlag TaxReportingAddress_City Address_State Address_Street Address_Zip
： *If you press Enter without entering anything on the first line, it will 

Supply Chain refers to a set of processes and activities performed by the company's business areas and its suppliers and partners (stakeholders), from the acquisition of raw materials, through production, to delivery to the end consumer. It can be better managed using SCM solutions with the orchestration of the InterSystems IRIS:

Hi Community,

Are you looking for resources to help your team onboard? Use these guides to get started!

Updated 12/09/25

Hi Community,

You can unlock the full potential of InterSystems IRIS—and help your team onboard—with the full range of InterSystems learning resources offered online and in person, for every role in your organization. Developers, system administrators, data analysts, and integrators can quickly get up to speed.

Onboarding Resources for Every Role

Developers

• Online Program: Getting Started with InterSystems IRIS for Coders(21h)
• Classroom Training:
  • Developing with InterSystems Objects and SQL(5 days)
  • Developing System Integrations (5 days) 

System Administrato

I'm pleased to announce the publication of gj :: dataLoader, a new VS Code extension that simplifies the task of loading data from local CSV files into SQL tables on your InterSystems IRIS servers.

Here's an introductory video:

gj :: dataLoader is now available on Marketplace for direct installation into VS Code. It is my entry in the "Bringing Ideas to Reality" Contest 2025 and implements this idea - https://ideas.intersystems.com/ideas/DPI-I-667

Feedback is welcome.

What are best practices for JSON transformation in IRIS interoperability? This is for a non-healthcare use case, so any tools we happen to have around FHIR might not be available. The motivating use case is trimming down a verbose and needlessly complex REST API response to feed to an LLM - trying to reduce token usage and maybe get better results from less noisy data.

Specifically, I'm imagining matching based on JSONPath expressions and simplifying structures based on the inferred type of elements rather than a full schema. This might look replacing a deeply nested object value with a strin

The previous article introduced IrisOASTestGen, a tool designed to generate REST API test code for InterSystems IRIS based on OpenAPI 2.0 specifications. It demonstrated how to scaffold test cases using the default templates bundled with OpenAPI Generator.

This follow-up focuses on the next natural step: customizing the generated test code. By extending the code generation logic with Mustache templates, it becomes possible to express richer semantics, implement CRUD-aware tests, and create more meaningful test suites.

The example in this article will modify IrisOASTestGen to generate tests for

Hello!
I have the following XML document obtained through a string:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<MainDocument xmlns="urn:hl7-org:v3">
<realmCode code="IT"/>
<title>kjbkjkjbkjb</title>
<effectiveTime value="20090905150716"/>
[.....other tags.....]
<versionNumber value="1"/>
<component>
<body>mhvjhjkvhj</body>
<component>
<section>content</section>
<ID>5</ID>
<title>Certificato</title>
<text/>
<entry>
<Id>5</Id>
[...other tags...]
</entry>
<entry>
<Id>6</Id>
[...other tags...]
</entry>
</component>
</component>
</ClinicalDocument>
I would like to have a way to obtain only the content of the <en

Keywords:  Vibe coding, Windsurf, IRIS, TIE

Why not?   "Vibe coding" is never about the vibe!

Has anyone not been trying "vibe coding" so far?

Even merely 3 years ago, if anyone asked

• "Could I do IRIS implementation for NHS TIE in English or Spanish or just Chinese ?", or
• "Can I just instruct TIE in English to build itself an e2e route, to pick up a PDF report then turn into ORU/MDM message and submit into the PAS ?", or
• "Could we query IRIS database in English only, and build up dashboard or ad hoc report of my own by English instructions?"

you would probably have laughed, tried no

Modern SQL engines are enormously complex pieces of software. Even when they appear stable and mature, subtle bugs can hide in their optimizers, type systems, predicate evaluation, or execution layers. These bugs rarely announce themselves loudly. Instead, they quietly produce incorrect results, behave inconsistently, or fail abruptly under specific combinations of SQL constructs.

This is precisely why tools like SQLancer exist. SQLancer automatically generates SQL queries and uses logical “oracles” to detect when a database behaves incorrectly. It has revealed hundreds of real bugs in widely used systems such as MySQL, PostgreSQL, SQLite, and DuckDB.

With this in mind, I attempted to bring SQLancer to InterSystems IRIS, starting with the NOREC oracle — a powerful method for detecting optimizer correctness issues. The journey, however, uncovered not just potential SQL correctness problems, but also a surprising number of driver-level and server-level failures that prevented SQLancer from running at full strength.

This article summarizes why SQLancer is important, how the NOREC oracle works, and what unexpected findings appeared while testing IRIS.

Auditing is a critical capability ensuring the security of your server, and for quite a while ago we have included the ability to audit SQL statements run on the server.

With v2024.3 out already we're providing finer-grained options for defining these events to audit.

One of the newest features of .Net core 10 with C# 14 is the file-based apps. This feature allows you to execute C# code in a simple .cs file without the need to create a solution, a project, or any of the related structure.

For example you can create a script.cs file using the notepad with the content: 

Console.WriteLine(“This is a script in c#.”);

Then in the command line or the terminal you execute the command:

dotnet run script.cs

There is plenty of information about this new feature of .net 10. To work with IRIS we can make use of the option to add NuGet package references directly i

How to set up RAG for OpenAI agents using IRIS Vector DB in Python

In this article, I’ll walk you through an example of using InterSystems IRIS Vector DB to store embeddings and integrate them with an OpenAI agent.

To demonstrate this, we’ll create an OpenAI agent with knowledge of InterSystems technology. We’ll achieve this by storing embeddings of some InterSystems documentation in IRIS and then using IRIS vector search to retrieve relevant content—enabling a Retrieval-Augmented Generation (RAG) workflow.

Note: Section 1 details how process text into embeddings. If you are only interested