I need to use a context variable in my code block for the table to query. When I use :content.table, it does not work.  When using the literal, it does.  How do I get the :context to work?

An X12 / 271 message shows "Completed" on the BO. However, it did not reach its destination. I searched for more information on what the error means but, couldn't find much. See error enclosed below. Any idea what it means and how to fix it?

More info...

• The IOLog Record shows in the Output Data an error... "An error occurred with the web application. It has been logged to system error log (System Operation > System Logs > Application Error Log)."
• The EDI response shows the same message.

While working with GET request I encountered this situation where FHIR Server return a responseStatusHTTP "HTTP/1.1 200 200" instead of "HTTP/1.1 200 OK" (as highlighted in the attached screenshot).

Although the response code seems valid, these bundles have a total value of 0.

Could anyone clarify what "200 200" signifies in this context? Is there an issue with my setup, or does this indicate a specific condition related to the empty bundle search?

Thank you in advance for your help!

As part of a migration project from a bunch of java classes to IRIS, we need to maintain a few jar files due to some external dependencies.

The problem I am seeing is that I cannot pass a byte array ( byte[] ) from ObjectScript to the Java Class. I have tried a number of different ways

I have reproduced in a java class and Objectscript class:
Java Class:

package wrc;

public class TestJava {
    
    public static void testByteArr(byte[] keyBytes) {

        System.out.println("keyBytes getClass() = " + keyBytes.getClass() );
        System.out.println("keyBytes toString() = " + keyBytes.

I'm attempting to streamline a process for renaming PDF documents received from multiple vendors to conform to a specification provided by an EMR vendor for ingestion. Things like Document ID, Document Type, Date of Service, Account Number, MRN, etc. all must be included in the filename at defined offsets and lengths. Most of the required values can be extracted from the inbound file's name and the few remaining are static values that would be the same (or handled via a lookup table based on source) for all documents.

InterSystems has corrected a defect that causes invalid database and journal records to be introduced when using a specific $LIST syntax. The likelihood of encountering this defect is very low but the operational impacts can be significant.

Products Affected

• InterSystems IRIS® data platform: Versions 2023.3, 2024.1.0, 2024.1.1, 2024.1.2, 2024.2, 2024.3
• InterSystems IRIS® for Health: Versions 2023.3, 2024.1.0, 2024.1.1, 2024.1.2, 2024.2, 2024.3
• HealthShare® Health Connect: Versions 2023.3.0, 2024.1, 2024.1.1, 2024.1.2, 2024.2, 2024.3
• HealthShare® Unified Care Record and Suite: Version 2024.

I am hoping for some guidance.

I am new to creating a new chart in Trakcare for use with Clinical Viewer.  My organization only has LDAP users, (we don't have the ability to use local users), that dictate what role/group a user is in, they are all the same across our Prod, Test, and Dev environments. 

I need to customize a chart for our end users.  BUT the how-to's all talk about creating a custom role for the new chart, which if I do this I would have to be added to this role/group which could cause issues with my ability to work in Prod and Test.

In tracking down some of our Orphaned message issues, I was wondering if setting our EnsLib.SQL.Snapshot variable equal to "" was the same as calling the .Clean() method on EnsLib.SQL.Snapshot? Are they the same?

should I be possibly using ##class(EnsLib.SQL.Snapshot).%Delete() instead?

Hi, I'm trying to use the iris python package to create a connection to and Iris Health instance (Docker Container), but getting and error. I can login to the instance using the UI with the same uname/password but unable to create the python connection. Any suggestions?

conn = iris.connect("testserver",52222,"%SYS","username","password")

After executing this I get an exception trap
An error occurred: Invalid Message Count: expected: 1 got: 825110831

I have a Service reading a flat file and routing to a Process.  Does anyone know how to get the %Source value into a BPL context parameter?

I downloaded IAM-3.4.2.0-5604.tar.gz from the Online Distribution site this morning, it the implementation to install it on our Development environment to see if it is a viable solution. Following the instructions, I have ran into an issue trying to make sure I am entering the information into the prompts correctly.

I have IRIS HealthShare Health Connect 2024.1 running locally using a Local Web Server, so when prompted I have entered the IP Address and port 443 is that correct? 

:>iam-setup.sh
Welcome to the InterSystems IRIS and InterSystems API Manager (IAM) setup script.

I tried executing the SQL JSON_TABLE query with large JSON string(more than 200000 characters) and I got the below error. I'm curious about this under the hood workflow and how does it reach reaches MAXSTRING.

 Thanks!

Hello, community.

I have a problem with running a SQL query on a linked MySQL table.

The connection works fine, but the following query throws an error:

SELECT   TOP 10 * FROM   linkedinternal_test.persons

 [SQLCODE: <-400>:<Fatal error occurred>]

  [%msg: <Remote JDBC error: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '10 T1.PersonID AS C1,T1.LastName AS C2,T1.FirstName AS C3,T1.Address AS C4,T1.Ci' at line 1. >]

Linked table class:

/// Generated by the Link Table wizard on 2025-01-08 16:09:03.

I'm glad to announce the new version of IoP, which by the way is not just a command line. I'm saying because the new AI search engine still thinks that IoP is just a command line. But it's not. It's a whole framework for building applications on top of the interoperability framework of IRIS with a python first approach.

The new version of IoP: 3.2.0 has a lot of new features, but the most important one is the support of DTL . 🥳

For both IoP messages and jsonschema. 🎉

DTL Support

Starting with version 3.2.0, IoP supports DTL transformations.

DTL the Data Transformation Layer in IRIS Interoperability.

DTL transformations are used to transform data from one format to another with a graphical editor. It supports also jsonschema structures.

Another VSCode "Tips & Tricks" entry -

Do you want to see this option in VSCode?

Hello Community,

Is there any built in methods available to generate the both HTTP message format(request/response) from %Net.HttpRequest and it's response. 

Thanks!

how to convert from json into sda container and then to fhir bundle resource. What are the out of the box DTL transformation class for this. Source would be my json that includes a few resources and targer should be a SDA container than will again be source to another transformation for which the target will be FHIR bundle. What I want to know is the target HS. 1for both SDA container and FHIR bundle. Thanks!

I have a query that returns around 6000 records that I need to go through and update another MS SQL Table. I would like to execute this once a day. How do you set MaxRowsToGet on a EnsLib.SQL.InboundAdapter service?

Thanks

Scott

Hello,

I was just trying to get to the bottom of a TLS config - we have an interface with a TLS config that has had 'Server certificate verification' set to 'On', however the cert file specified either did not exist or contained a cert that was expired.

Does anyone know what the behavior is for this typically? I would expect this to not allow traffic on the interface, however this has been working fine for a few years now with an invalid cert specified for 'Server certificate verification' and set to 'On'.

Hello Community,

we're running an Iris installation on SLES 15.5 using the SLES Apache server and web gateway for hosting the management portal on Port 57772 (e.g. http://<host-name>:57772/csp/sys/%25CSP.Portal.Home.zen?$NAMESPACE=HL7TOFHIR) on the same machine. The Iris installation also provides a FHIR Server in a separate namespace which uses the base URL http://<host-name>:57772/fhir/r4 for connections.

The installation is locked down and the SLES Firewall is activated an configured to just allow connections on port 57772 and 1972. Apache currently listens to Port 57772 only.

When developing a new Interoperability Production, it is quite natural that settings are initially added in the Production.

However, as soon as you want to move the Production from development to a test or staging environment, it becomes clear that some settings like HTTP Servers, IP addresses and/or ports need to be changed. In order to avoid these settings being overwritten during a redeployment later on, it is essential that you move these settings from the Production to the System Default settings.

The best way to list, edit, save and delete globals is using an IDE. Now, it is possible if you use VSCode. It is also possible to save globals using yaml files. Perform the following steps:

1. Get an InterSystems IRIS instance and install the application iris-global-yaml: 

zpm:USER>install iris-global-yaml

2. If you just to want an InterSystems IRIS trial for tests git clone and run on docker:

git clone https://github.com/yurimarx/iris-global-yaml.git
docker-compose up -d --build

3. Go to https://openexchange.intersystems.

Last Chapter: Creating a REST client to get Tracks from Spotify REST API - Part4 Save the Search Result

Git link: https://github.com/ecelg/InterSystems-IRIS-as-a-Spotify-REST-client

OK.... based on what I have done.... I am able to 

1. Query Track information by making use of the Spotify API

2. Store the necessary data into my own album, artists, and track table

so.... what next?🤔 How about I set up my own REST API service on my IRIS for the other people to query my table?🤔🤨

We have released IPM 0.9.0. I previously remarked on some of the history and reasoning here; to summarize, this is a big release for two reasons: it represents a long-overdue reunification of our internal and community-driven work around IRIS-centric ObjectScript package management, and it has some backwards incompatibilities. There are several necessary backwards incompatibilities in our roadmap, and we've lumped them together; this will not be some new norm.

Under the hood, the class naming and package structure has completely changed.

Last Chapter: Creating a REST client to get Tracks from Spotify REST API - Part3 Get some data (e.g. Artists)

Git link: https://github.com/ecelg/InterSystems-IRIS-as-a-Spotify-REST-client

OK we create a method to get data and lets try to get some Tracks 😁

Now open a terminal and test the code

Run the following line

w ##class(rest.utli.requestUtli).getdata("Spotify","/search","offset=5&limit=10&query=Shape%20of%20you&type=track&market=SG")

ooooo no seems there is huge among of data returns.....😥

I would like to know what information can be found in 1 track.

Git link: https://github.com/ecelg/InterSystems-IRIS-as-a-Spotify-REST-client

Recently, I come up an idea in my mind that how can I put my playlist on IRIS.🧐

At the same time, I was told to pay for my Spotify subscription💸💸... ooo.. how about to get some data from the Spotify API... so I started to do study about it.

Like most of the development, let's start from Documentation of  the API https://developer.spotify.com/documentation/web-api

In order to get the data, i am required to request an access token from for the token endpoint URL.🧐

curl -X POST "https://accounts.

Last Chapter: Creating a REST client to get Tracks from Spotify REST API - Part2 Save and Refresh Token

Git link: https://github.com/ecelg/InterSystems-IRIS-as-a-Spotify-REST-client
 

Ok, now I am pretty sure i have a valid token for making query.😀

Shall we try to query something from the API.

Again, its time to go through the API document https://developer.spotify.com/documentation/web-api/tutorials/getting-started

Search for Request artist data

the suggested code is like the following

curl "https://api.spotify.

Last Chapter:  Creating a REST client to get Tracks from Spotify REST API - Part1 Check out token

Git link: https://github.com/ecelg/InterSystems-IRIS-as-a-Spotify-REST-client

Ok... Now we can check out a token but it will be expired in 3600 seconds.

There are 2 questions come up🤔

1. How to save this token????🙄

2. How to refresh this token????🤨🤔 

Lets come back to the API document https://developer.

Hi!

Suppose I have full access to InterSystems IRIS database instance A and want to export a consistent part of the data and import it into another InterSystems IRIS instance B. Classes are equal.

What are the most general and convenient options for me?

TIA!

Hello,

I'm trying to customize error handling in the overriden HS.FHIRServer.Storage.JsonAdvSQL.Interactions::Search method. It is clear how to add to the resultset a valid FHIR resource (pseudocode):

Method Search(pResourceType As %String, pCompartment As %String, pCompartmentId As %String, pParameters As HS.FHIRServer.API.Data.QueryParameters = "", ByRef pSortKeys = "") As HS.FHIRServer.Util.SearchResult
{
    #Dim resultSet as HS.FHIRServer.Util.SearchResult
    Set resultSet = ##class(HS.FHIRServer.Util.SearchResult).