My IRIS instance is connected to a Postgres database using SQL Gateway and linked tables.
One of these tables is projected to the Patient class. I want to select a record from this table by ID and convert it to a FHIR resource using the %ExistsId and %OpenId methods.
I noticed that if I call these two methods from the console, the record is always found.

0 1
0 81

Hey everyone, I am implementing version control with git-source-control on our codebase and I ran into a pretty strange issue. I believe I have the set up (mostly) correct as the behavior with .cls files is exactly as expected. However, I noticed that git is not keeping track of any changes to CSP files.

Specifically, if a new CSP file is created and saved, I will get the following output:

exporting new version of /csp/testdb/wrc.csp to C:\InterSystems\IRIS\mgr\repo\TESTDB\csp\testdb\wrc.csp

1 8
1 177

The latest "Bringing Ideas to Reality" InterSystems competition saw me trawling through the ideas portal for UI problems to have a go at.

https://www.youtube.com/embed/zw51X1JQhQ0
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

3 0
0 152

Like many others probably find themselves, we were stuck doing live data mapping in our Interface Engine that we really didn't want to do, but had no good alternative choice. We want to only keep mappings for as long as possibly needed and then purge expired rows based upon a TTL value. We actually had 4 use cases for it ourselves before we built this. Use cases:

1 0
0 104

I am developing locally on my IRIS instance using VSCode and client-side editing approach. How can I automatically export a single .cls file/a whole package to a remote TEST/PREPROD server using a script or command line and recompile the unit remotely? Are there any more simple and straightforward ways than CI/CD explained in the series of articles by Eduard?

0 3
0 132

We have error - ERROR #5821: Cannot instantiate query: 'SQLCODE = -146, %msg = Error: '' is an invalid DISPLAY Date value' not able to see what is causing:

CASE When P.PatReltoGuar->Name = 'SELF' then P.Lnm Else Substring(P.GuarNmIfNotPat, 1,Charindex(',',P.GuarNmIfNotPat)-1) End as DemoGuarLastName,

CASE When P.PatReltoGuar->Name = 'SELF' then P.Fnm Else Substring(P.GuarNmIfNotPat,Charindex(',',P.GuarNmIfNotPat)+1,LEN(P.GuarNmIfNotPat)) End AS DemoGUARFIRSTNAME,

0 1
0 87
Question
· Dec 6, 2024
Foreign Servers - Visibility?

First time trying to use Foreign Tables/Servers instead of Linked Tables...

Within the SQL Editor inside of the Managment Portal, or connecting through DBeaver JDBC how we can see what Foreign Servers have been defined? Is there a way to query and verify structure of the Foreign Server connection to know that we are building the correct Foreign Tables?

I attempted to create my first Foreign table but it failed when I tried to query the tables because it said the table could not be found. But when I sign into the Database via SQL Management Studio, I can see the table.

0 3
0 111
Question
· Nov 26, 2024
HL7 Encoding issue

Dear All,

I have been sent an HL7 message as a file with the MSH segment as follows....

MSH|^~\&|SendingApp|pms3medd|HealthLink|cribrumt|20241121050000|PKI|ORU^R01|01_ASCIItest_2|P|2.3.1||||||UNICODE

I try picking up the file with a "EnsLib.HL7.Service.FileService" business service using a EnsLib.File.InboundAdapter adaptor. The Character set is set to "Native" and the Default Char Encoding to latin 1.

I am seeing the following error:

0 4
1 171

I want to integrate IRIS with Keycloak OAuth2 provider to use delegated authentication everywhere and to secure everything - sys*/Portal applications, REST services, FHIR server and so on. If an unathenticated user tries to access any IRIS URL - he or she should be redirected to Keycloak. After the user has successfully authenticated, i would like to access his requistes (username, email, roles, scopes) extracted from the JWT token, programmatically. What should be done to achieve that?

1 1
0 171

I'm trying to call a SOAP web service which is implemented in .NET Classic and requires NTLM authentication. The client class was generated by %SOAP.WSDL.Reader. The problem is that neither NTLM authentication works nor can I handle the exception since VSCode debugger says that all meaningful fields and properties are empty (the same request works fine in Postman):

0 4
0 156

InterSystems announces General Availability of InterSystems IRIS, InterSystems IRIS for Health, and HealthShare Health Connect 2024.3

The 2024.3 release of InterSystems IRIS® data platform, InterSystems IRIS® for Health, and HealthShare® Health Connect is now Generally Available (GA).

3 0
0 283

The rise of Big Data projects, real-time self-service analytics, online query services, and social networks, among others, have enabled scenarios for massive and high-performance data queries. In response to this challenge, MPP (massively parallel processing database) technology was created, and it quickly established itself. Among the open-source MPP options, Presto (https://prestodb.io/) is the best-known option. It originated in Facebook and was utilized for data analytics, but later became open-sourced.

6 0
3 232

What settings do I need to just passthrough an X12 messages from a BS to BO and out the BO without modifying the message?

Currently, we are receiving the X12 messages but, it seems Iris is modifying it by "hiding" some segments like the ISA segment. The message goes out the BO modified and it doesn't reach its destination. Since I just want to pass it through, there is no BP, DTL, or Rule processing the message. Message is received by the BS and sent directly to the BO.

My current settings:

1 7
0 124

Greetings dear community members!

I have recently been deploying an IRIS for Health image on a Docker with a preconfigured Webgateway image and I have come across the problem of the SSL configurations that allow us to connect to the IRIS instance using HTTPS and going through our Webgateway.

Until now I had always deployed IRIS for Health with a Community license, which still has the Private Web Server installed, so I only needed to configure the Webgateway connection with the deployed IRIS instance:

5 1
1 230

I finally figured out how to get JWT token using set x = ##class(%SYS.OAuth2.Authorization).GetAccessTokenClient("medbank","openid fhirUser",.prop,.err).

I also found iris-fhir-client app on Open Exchange. I registered Epic sandbox server, but I cannot list resources. I suspect I need to integrate authorization / authentication. How do I do this with irisfhirclient py?

2 1
0 99

Is anyone using Veeam as their external backup product?

I'm trying to backup a Linux VMs (VMWare; SUSE).

These VMs have a mirrored pair IRIS DB.

I'm using the InterSystems's provides pre-freeze - Backup.General(ExternalFreeze)
I'm using the InterSystems's provides post-thaw - Backup.General(ExternalThaw)

I've been running the backups with Veeam 'application aware processing' so I can add the pre-freeze and post-thaw scripts.

I'm backing up the PRIMARY node of the mirror pair.

0 3
0 145

InterSystems FAQ rubric

Mirroring only synchronizes database files.

To synchronize other files required for your application (CSP files, images, documents, etc.) between the two servers that make up the mirror set follow one of the approaches:

  1. Place those files on a shared disk by introducing a NAS or similar device
  2. Or use file sync software to synchronize files between two servers.
2 0
0 136

I am using a JDBC connection to MS SQL server to execute a stored procedure to select data and bring it into InterSystems as a EnsLib.SQL.Snapshot. I loop through the EnsLib.SQL.Snapshot using a while loop, but I also want to iterate through the Columns within that Row to do logic.

Is there a way to iterate through the Columns of the current Row of the EnsLib.SQL.Snapshot so I can apply logic/rules for further processing?

Thanks

Scott

0 4
0 84

Hello,

I want to upload a "custom" metric in prometheus (queue).

For now, in version 2022, I have the impression that we cannot add multiple labels and yet the basic metrics know how to do it.

ex: standard metric

iris_interop_messages_per_sec{cluster="1", host="xxxx", id="API", instance="xxxx:80", job="SAM", production="xxxx"}

my current example: I would like to be able to at least add the production, just to have the source of the measurement.

my_iris_queue{cluster="1", id="xxxx", instance="xxx", job="SAM"}

0 2
0 83