Nearline FHIR® Ingestion to InterSystems OMOP from AWS HealthLake

This part of the OMOP Journey, we reflect before attempting to challenge Scylla on how fortunate we are that InterSystems OMOP transform is built on the Bulk FHIR Export as the source payload.  This opens up hands off interoperability with the InterSystems OMOP transform across several FHIR® vendors, including Amazon Web Services HealthLake.

Why This Matters

Managing IAM can be tedious when done manually — especially when your APIs are already well-documented using OpenAPI (Swagger) specs. Wouldn't it be great if you could automatically generate Kong services and routes directly from your OpenAPI spec?

That's exactly what this ObjectScript method does: it reads an OpenAPI 2.0 spec stored in the XData block of your spec class and generates a decK-compatible YAML file that can be used to sync your IAM configuration.

Hi, Community!

Need to install a HealthShare solution module? Follow this simple step-by-step process to get started!

Deploying HealthShare Solution Modules with InterSystems Package Manager

InterSystems FAQ rubric

The ^%GCMP utility can be used to compare the contents of two globals.

For example, to compare ^test and ^test in the USER and SAMPLES namespaces, it would look like this:
*In the example below, 700 identical globals are created in the two namespaces, and the contents of one of them is changed to make it the detection target.

Hi community,

A colleague gets ERROR #822: Access denied every time he tries to log in via Management portal. It is NOT the case of wrong credentials: I reset his password password to a temporary one so it would prompt him to create a new one upon first login. He did get the prompt, changed his password and his next attempt at logging in displayed the same error.

The audit log record displays this:
Error message: ERROR #862: User is restricted from running application /csp/sys/op, %Admin_Operate:U required -- cannot execute.

I want to integrate Google Cloud Pub/Sub with InterSystems IRIS(HealthShare) and I see that InterSystems does not provide any out of the box Inbound/Outbound adapters for this integration though it has adapters for Kafka and other similar services. Any suggestions would be really appreciated.

I joined InterSystems less than a year ago. Diving into ObjectScript and IRIS was exciting, but also full of small surprises that tripped me up at the beginning. In this article I collect the most common mistakes I, and many new colleagues, make, explain why they happen, and show concrete examples and practical fixes. My goal is to help other new developers save time and avoid the same bumps in the road.

1. Getting lost among system classes and where to start

The issue: ObjectScript/IRIS ships with many system classes and packages (%Library, %SYS, %Persistent, %SQL, etc.).

Hi Community,

This is my first post in the developer community - would appreciate any feedback!

For testing or demo purposes, you may want to send emails from your Interoperability Production. In this post then I will walk you through connecting an InterSystems IRIS Production to Gmail so you can use it to send emails alerts.
 

1. Set up a new Gmail

1. Create a new Gmail account and document the username and password for future references.
2. Go into the Settings icon on the top right corner of the gmail interface then click on "See all settings".

Introduction

HL7 messages often contain multiple repeating segments such as NTE, AL1, OBX, ZTX, DG1, and others. These segments sometimes require individual processing and routing to different downstream systems. This technical paper introduces a configurable template designed to automate the splitting of these repeating HL7 segments, improving message handling and integration efficiency.

Hi, Community!

🔥Does your organization work with HL7® FHIR® resources and need training, now or in the future?

Learning Services is exploring whether to create a new instructor-led course on FHIR support in InterSystems IRIS® for Health and HealthShare® Health Connect.

If you’re involved in approving or recommending training for your team, we’d love your input! Please take a few minutes to complete this short survey.

Your feedback will help us understand both current and future demand so we can build training that supports your needs.

Thanks in advance for sharing your perspective!

👉Take the survey.

hi everyone

we are migrating a legacy script that uploads the files to a SharePoint site through webdav to Health Connect engine.

I wonder if anyone has ever done that, if yes, what did you do to achieve this?

thanks in advance,

Frank

Hello Community

The InitialExpression keyword values does not to set default values for properties in classes that extend %CSP.Page, unlike in other class types such as %Persistent or %RegisteredObject, where it works as expected during object instantiation (typically via %New()).

1. Is %CSP.Page instantiated using %New() under the hood, or does it use a different initialization mechanism?
2. Are there specific limitations or behaviors in CSP pages that prevent InitialExpression from working as expected?

Thank you!

Hi,

Just thought I'd share quite a handy hook that has helped me out when developing on Health Connect Cloud with VS Code and GitBash. When developing on Health Connect Cloud, if changes are made directly on the server such as routing rules or component deployments, they aren't automatically included in source control, therefore you must export from the server into your local files and push to your remote repo. I'm sure there are easier methods to deal with that which I'm in the process of testing, but as a quick solution I thought it would be handy have a pre-commit hook which triggers a reminder in GitBash - see below.

The utility returns the desired values from the text and display the multiple values if exists based on starting and ending string.

Class Test.Utility.FunctionSet Extends %RegisteredObject
{

/// W !,##class(Test.Utility.FunctionSet).

Building a Sensor Data Demo with Spring Boot and InterSystems IRIS

In the era of IoT and connected devices, sensor data is everywhere—tracking temperature in logistics, monitoring equipment performance, or recording environmental conditions. But capturing, storing, and analyzing this data in real time requires more than just hardware sensors.

It’s a practical example that combines Spring Boot, InterSystems IRIS, and a simple sensor simulation script to show how sensor data can flow from generation to storage and alerting.

Hi all,
I needed to pick up the username from a set of credentials configured for a business operation in an interop production, and it turned out to take a few steps, so I'm sharing my method here, in the dual hope that someone has an easier way to do it, or failing that, that it is useful to someone.
Best,
Otto

InterSystems FAQ rubric

One way to optimize query performance is to use query parallelism on a per-query or system-wide basis (a standard feature).

This is a technique for dividing the execution of a particular query among processors on a multi-processor system. The query optimizer will execute parallel processing only if there is a possibility of benefiting from parallel processing. Parallel processing is only applicable to SELECT statements.

Note that the number of parallel processes cannot be specified, as it is automatically adjusted according to the number of CPUs.

Securing IRIS Integrations with Mutual TLS (mTLS): A Practical Guide

In today’s enterprise environments, secure communication between systems is not optional—it’s essential. Whether you're integrating InterSystems IRIS with cloud APIs, internal microservices, or third-party platforms, Mutual TLS (mTLS) offers a powerful way to ensure both ends of the connection are authenticated and encrypted.

This post walks through how to configure IRIS for mTLS and how to validate your certificates to avoid common pitfalls.

🔐 What is Mutual TLS (mTLS)?

• Building and Managing HL7 Integrations – In Person October 20-24, 2025 9:00am-5:00pm EDT
  
  • Build, configure, and manage HL7^® V2 interfaces using InterSystems integration technologies.
  • This healthcare-focused 5-day course teaches implementation partners, integrators and analysts how to rapidly build HL7 integration solutions.
  • Students build a production that processes and routes HL7 messages.
  • Students learn how to work with the pre-built HL7 business services, business processes and business operations to receive and send HL7 messages.

Following on from JediSoft’s announcement of the general availability of JediSoft IRISsync®, I wanted to show how it can help prevent configuration drift and ensure your failover is always ready. 

When managing InterSystems IRIS production servers, even a minor configuration change can cause significant issues if it’s not replicated in your mirror environments. Often, these differences go unnoticed until your failover environment breaks.

This common, but critical, problem can lead to unexpected downtime at a vital moment and impact your business continuity.

Ready to elevate your Business Intelligence game?

We've got an engaging video, perfect for all skill levels.

Discover how to get started with IRIS BI, optimize cube performance, and drive analytics adoption. Plus, get a sneak peek at what's next!

BroadSea - Core OHDSI Walkthrough with InterSystems OMOP

Hi everyone,

I'm currently seeking a new position related to InterSystems technologies. My major skill is app integration and data flow development on the InterSystems IRIS platform (Interoperability). I develop high-load, mission-critical software. My coding background on Cache ObjectScript includes hundreds of data flows, thousands of Production business hosts, dozens of APIs, and other solutions on InterSystems IRIS. I worked to integrate such applications as SAP S/4HANA, Oracle Siebel, SAP Commerce Cloud, many custom apps, and all that can be integrated. I have also gained experience in various areas, including SQL, Java, Docker, IRIS administration, Apache Kafka, and Flutter (Dart).

My problem was separating HL7 messages by message type.  I had to create multiple File Operations.  So I with custom code I am able to use 1 File Adapter for 1 interface and multiple message types.  I did experiment pulling the MSH 4 out of the raw content to further access dynamic information, but that may open a need for more robust error checking / lookup default actions.

Using the recommended naming convention of "To_FILE_<IntegrationName>"

I decided to use a generic file name and path in the default settings.

I created a custom class that extended the EnsLib.File.

I used to mannually test objectscript code in InterSystems Studio.  Does anyone know how to do this is VS Code?

We are excited to announce the general availability of JediSoft IRISsync®, our new synchronization and comparison solution built on InterSystems IRIS technology.  IRISsync makes it easy to synchronize and compare IRIS instances.

IRISsync was voted runner-up in the "Most Likely to Use" category at InterSystems READY 2025 Demos and Drinks.

A huge thanks to everyone who supported us — we’re thrilled to see IRISsync resonating with the InterSystems user community!

IRISsync provides clear visibility into differences between environments.

No Code Text to SQL w/ Databricks Genie and InterSystems OMOP

Using OpenEHR with InterSystems IRIS

Occasionally. we get questions about using OpenEHR with InterSystems.   Typically, these discussions focus on why and how an organization wants to implement OpenEHR in building applications. Here’s a brief guide:

• InterSystems is focused on interoperability:  we prioritize interoperability through standards such as HL7, IHE, DICOM, and ISO. In our experience, no single standard addresses all the needs of complex healthcare data.

I would like to learn about the binary and document reference FHIR Resources. For the PDF data stored in those resources. But I think Binary Resource for the Document PDF stored in FHIR, so this resource is best for it. So sometimes Large PDF 15-page (~35md) data converts into base64 then data length is ~50 lac charecters length of base64binary data. this data store in Binary Resource on data field https://www.hl7.org/fhir/R4/binary.html follow this url this resource used in my case. so it's support the 50 lac charecter of the base64 length? This resource can be Insert into IRIS?

A benefit of using Doxygenerate is that Doxygen does more than just HTML output. Tweak the Doxyfile that tells Doxygen what to do and you can easily create a PDF. Our example MARINA application yielded a 524-page PDF. Here's what page 94 looks like:

You can browse the whole file here.

In the screenshot above, notice how we only get details of the superclass that is part of the app (AuditHistory). The primary superclass, %Library.SerialObject, is shown faded and with no details of what BankDetails inherits from it.