HealthShare

Syndicate content 56 

Hello guys,

I've got this piece of code which runs the method "WebMethod", that belongs to %SOAP.WebBase.cls.

It grabs the outcome from an internal webservice we have and after that, it writes into a file.

The thing is, when I browse the file contents, I realize that in the place where a special character should be, I see a question mark.

By querying the same webservice from a special soap tool called "SoapSonar" (I've been using this for years), the outcome shows up this special character (shows it properly).

Last answer 31 January 2017 Last comment 2 February 2017
+ 1   0 2
2627

views

+ 1

rating

Hi All -

I was wondering if the below query could be enhanced to automatically look back 24 hours from the current datetime the query is run. As is now I, of course, have to update the date range in the WHERE clause manually.

The query is just getting all MessageBodyClassNames, counting them and then doing an AVG on TimeCreated and TimeProcessed. Nothing too complex.

 

SELECT MessageBodyClassName, count(ID) as Count_Of_Messages, avg(datediff(ss, TimeCreated, TimeProcessed)) as avg_processing_time_in_seconds

FROM %PARALLEL Ens.MessageHeader

Last answer 20 April 2017
0   0 2
0

comments

1775

views

0

rating

Hi,

Can anyone  point me to an example of a DTL & Class method that can pull a base64 encoded PDF out of a MDMT02 message?

This is really asking for two things;

- how to make a DTL that extracts a specific subfield of an HL7 2.3 message into a message of its own,

and

- how to transform an base64 encoded document into its original binary form for writing to a file.

I'd also love to see an example of an HL7 2.n MDM^T02 ==> HL73.ITK2 non-coded CDA

 

Last answer 20 April 2017 Last comment 20 April 2017
0   0 4
1335

views

0

rating

Hello,

Are there any utilities/api in HealthConnect 2016.2.1 that will allow conversion of XML virtual document to Json format? We were thinking to convert HL7 ADT message to XML via Ensemble DTL and then send it to another BP to convert to Json format for transmission via Web Services. To my understanding there isn't anyway to represent Json as a virtual object so it can be use for direct mapping of HL7 2.x message to Json via Ensemble DTL.

Thanks

Yuriy

Last answer 20 July 2017 Last comment 15 May 2017
0   0 1
1249

views

0

rating

Hi,

I've been trying to create a patient using FHIR, but all I seem to get back is:

{"resourceType":"OperationOutcome","issue":[{"severity":"error","code":"invalid","details":{"text":"FHIR create interaction invalid for this end point"},"diagnostics":"FHIR create interaction invalid for this end point"}]}

I've tried a variety of requests and read operations work, but create doesn't seem to. Has anyone run into this? Any ideas? Thanks.

Last answer 5 September 2017 Last comment 6 September 2017
0   0 2
1130

views

0

rating

Hello Greetings-

I am exploring on converting HL7 to FHIR.

1. I saw there are built in DTLs “FHIR.FromSDA” and “FHIR.ToSDA” to convert SDA -> FHIR and FHIR -> SDA. Similarly Do Intersystems have DTLs for HL7 -> FHIR and FHIR -> HL7?

2. The reason why I am asking is, I see in HSLIB namespace HS->GateWay->HL7->HL7toSDA3 and HS->GateWay->SDA3->SDA3toHL7 DTLs. Like-wise I am trying to locate HL7 -> FHIR and FHIR -> HL7. Please help me to locate them

Last answer 22 March 2017 Last comment 14 August 2017
+ 1   2 2
1028

views

+ 1

rating

Hi, 

I can't work out how to use the Cache CA Server to process certificate request from external clients!

We are setting up an interface where we use SSL/TLS 'Mutual Authentication' to allow a client system to securely transmit document to  our server. (they are off-site and hosting a service for us)

I am not a security expert, but my understanding of setting up mutual authentication where my instance of ensemble is the server, and it is receiving messages from a client is as follows

Last answer 3 May 2017 Last comment 2 May 2017
0   0 3
805

views

0

rating

If your application is raising <PROTECT> errors and you're finding it hard to work out why, here's a way to get additional information.

First, if auditing is not already enabled, turn it on:

Then use "Configure System Events" (highlighted above) and locate the event named %System/%Security/Protect. In the screenshot below I used the Filter field to do this (type "protect" - highlighted below - and press TAB):

Last comment 24 April 2017
+ 4   0 3
784

views

+ 4

rating

Hi,

Can you please tell us how to create xsl file for CCD to SDA conversion using XSLT.

What will be the prerequisites.

I have tried to create an xsl file for the given xml given belowusing XSLT transform Wizrad:

<?xml version="1.0" ?>
<s1 title="s1 title attr">
  <s2 title="s2 title attr">
    <s3 title="s3 title attr">Content</s3>
  </s2>
</s1>

using the stylesheet below:

Last answer 28 June 2017
0   0 2
0

comments

682

views

0

rating

Hello devs,

I'm facing an issue with one of my business services, which basically grabs a XML from a webservice (which in turn reads the data from the caché database) and does some processing afterwards. The XML content (which is formed of some of the table fields values) contains a special character: (left single quote)

Last answer 26 January 2017 Last comment 26 January 2017
0   0 3
656

views

0

rating

Newbie question. So bear with me please.

We have a requirement to extract or build a file off of our local db to feed to HealthShare.

The requirement is for us to create the extract and send it to HealthShare the SDA format.

My initial thought is why would you do that when the SDA is native to HS.  We could create a file in any format csv,tab etc let HS consume it, convert it to HL7 2.5.1 and then let HS do the work with the SDA.

However, the current direction is for us to query, get the data and map it to an xml file built off of the SDA.

Last answer 29 December 2017 Last comment 2 January 2018
0   0 2
648

views

0

rating

 

1. Scope and Objective:

 

Recently we supported a few NHS cases that required TIE (Trust Integration Engine) integration with the PKB service.   Hence this article is meant to be a 10-minute quick guide to describe a demo solution (simple configurations and end-2-end implementation steps) for Health Connect (Ensemble) Integration with PKB (Patient-Knows-Best) service.

+ 5   0 1
0

comments

583

views

+ 5

rating

Hi, 

I am a beginner on intersystems technologies ! and i want implements Oauth2 for our projects ( Angular 2 + Caché REST  Backend). 

i read the article that the link  is below : 

https://community.intersystems.com/post/cach%C3%A9-open-authorization-framework-oauth-20-implementation-part-1

But : i need to create  all servers ( Auth and Resource ) on Caché and dont' to use google server.

Last comment 26 September 2017
0   0 4
0

answers

554

views

0

rating

Suppose I have an image and need to convert that image into a PDF for inclusion in an HL7.

I know that Zen Reports can display an image in a PDF but I do not want to view the image in a web page. I just need to convert the image to PDF in a Process and then include that PDF in an HL7. The  workflow would be like this:

Get image -> Convert image into PDF -> Include PDF in HL7 OBX.

I know how to do the last part to include PDF in HL7 OBX. Just need ideas on the first part.

 

Last answer 8 May 2017 Last comment 8 May 2017
0   0 0
553

views

0

rating

Our client is a test out of 2016.1 (Build 656U) Healthshare that wants to do a one way SSL connection to our Java 1.7/Tomcat 8.0 server.  We have yet to come up with a secure cipher set that Healthshare and Java agree on for the handshake.  So far we've had to use these ciphers identified which are not recommended (though it does do a handshake properly).

Last answer 2 March 2017
0   0 0
0

comments

546

views

0

rating

HealthShare HealthConnect and Information Exchange version 15.03 support import transformations from C-CDA 2.1 to SDA. You can find these transforms in your installation's csp/xslt/SDA3 directory. For general information about import transforms, see "CDA Documents and XSL Transforms in HealthShare" in Overview of Health Connect.

Among the enhancements to import functionality added in connection with C-CDA 2.1 support is the ability to preprocess your C-CDA input files prior to the transformation done for import.

0   0 1
0

comments

523

views

0

rating

HI,

 

Has anyone implemented the NHS Care Connect profile in HealthShare and if so could you share the steps you took?

I am not looking to integrate it into the SDA model,  Just looking having the classes within HealthShare and then applying a DTL to convert to HL7 2.x

I was hoping i could just down load the profiles from git hub and import into Studio but it appears I need the XSD to do this, which are not available.

 

Cheers,

Jason

 

 

Last answer 14 September 2017 Last comment 6 March 2018
0   0 3
481

views

0

rating

Hi All -

Our environment has multiple instances of HealthShare installed and most are on separate VMs/servers. Does anyone have any ideas on how to efficiently manage user accounts across all of these multiple instances of HealthShare? As you can imagine, creating 10 separate Cache accounts on each instance during onboarding of new associates is cumbersome and tedious as is disabling them. We have yet to integrate with AD but we do have a Cyberark initiative under way but it is in the very early stages.

 

Last answer 10 May 2017
0   0 1
0

comments

423

views

0

rating

I am designing the software architecture for an Ensemble/Healthshare production to be deployed on Amazon AWS EC2 servers (2 mirrored m4.large - 4 vCPUs / 16 GiB RAM running RedHat Linux  3.10.0-327.el7.x86_64 and Healthshare for RHEL 64-bit 2016.2.1). It's a rather CPU-intensive production involving massive XSLT 2.0 transformations (massive both in terms of size and volume). I was wondering if anyone has experience configuring Ensemble productions on EC2 servers. My question or concern has to do with the following statement in the Ensemble documentation:

Last answer 25 October 2017 Last comment 26 October 2017
0   0 2
422

views

0

rating

Hi, 

We have a mixture of legacy and new systems, and are grappling with the issue of moving documents between systems.

At the moment we are mostly using file drops and encoding metadata in filenames, but a new supplier (letter transcription) is going to provide a Hl7v2 feed sending MDM^T02 messages with PDF's of letters base64 encoded in the message itself.

We are thinking of asking all our suppliers to go with MDM (or ORU) for sending documents. 

I'm interested in the pros and cons of the options; and if there are options I haven't thought of. 

0   0 1
0

comments

417

views

0

rating

Hoping someone can help.

I had posted a similar question outside this group a while ago "Errors requesting data from local Ensemble FHIR Repository" but haven't had the chance to follow up on it since. It was suggested I re-post inside this group.

I'm trying to request data from my local FHIR repository using a simple JavaScript client and am getting the following CORS errors . ( It is a standalone client not inside HealthShare without CSP etc. on my localhost ).

Last answer 27 September 2017 Last comment 27 September 2017
0   0 2
406

views

0

rating

Hi-

I have searched through documentation, etc and see many mentions of using Ensemble / Health Connect along with the Java Gateway to interface with JMS Queues, but see no specific documentation on how to do this.

Does anyone have any information, or a concise example of using the Java Gateway to allow Ensemble / Health Connect to be able to place messages and retrieve messages from a JMS Queue?

Thanks

 

Last answer 5 December 2017 Last comment 6 March 2018
0   0 3
392

views

0

rating