#Ensemble

Hello,

Thanks for reading this question.

How would you recommend to filter out some XML elements according to a certain criteria?

We have the following message with all patient's drug prescriptions, let's call this message [1]:

Hi Guys,

Sorry I'm not that familiar in using Javascript in Zen pages, so basically we have a priting utility (app) that requires us to add a bit of JavaScript call to facilitate printing from our Zen pages as below:

So I added XData link pasted the required script, is this the correct way?

Thanks

Looking for advice on best practise (or at least reasonable approaches) for handling the Production class when utilising source control. (And perhaps wider advice around deployment.)

Hi Guys,

How can I create a clone class so I can keep a copy of all records in that clone class?

Basically, I have a class where sometime records might be delete from it, so I would like to create clone class or merge the global content in another backup global so that records can be deleted from the original class but still have a copy of those delete records in my clone or backup global ?

Thanks  

My employer set up a web-based HL7 interface monitor dashboard that will display all Ensemble components (Service/Process/Operation) in a Production, their status, and the support information embedded in each interfaces listing on the Monitor.  Please see 3 screenshots.  

This is part of the URL that we go to when accessing this Web based Monitor:  ......57772/csp/healthshare/monitor/Rush.Monitor.Web.Home.cls

How can you tell if a mirror member has failed-over?

Hi Guys,

is there any sample I can use for Images, I'm just looking for a very simple one where I can have an upload control to upload images & image control to show them?

Thanks

In over a decade of using Ensemble/HealthShare, we have been able to use a single message type (doc type) for all HL7 ADT event types. We now have an application for which the HL7 segment sequence is different for A03s than it is for other ADT event types. The content of the segments is the same across event types; only the segment sequence differs. The data transformation has to do some custom logic, so we can't just use the "copy" variety of the transformation Create property.

Hi All,

I am trying to create a production from a script(routine). 

I am using the below way to create an empty production

Set oProd=##class(Ens.Config.Production).%New()
Set oProd.Name="Test.NewProduction"
Set oProd.ActorPoolSize=1
Set status=oProd.%Save()

But when i tried to start the production, i am getting an error as "Test.NewProduction" class does not exists. 

Is there any other way to create the production via routine or terminal using commands as above?

@Jeff Fried 

Hi Jeff,

I reviewed the Ensemble 2018 support documentation
https://docs.intersystems.com/latest/csp/docbook/DocBook.UI.Page.cls?KE…

And I did not find a restriction on the use of Ensemble 2018 installed on Docker with Openshift, but I received information that Intersystems would not support this installation case. That is true?

This would help us with the transition to IRIS as I carry out the migrations.

Thank you very much for your help

Exported contents of a namespace on one server (classes, include files and lookup tables). Importing that code into a newly created namespace on another server. Both servers Ensemble 2018.1, same build. Export was via InterSystems Studio. Export is around 18Mb in total (XML file sizes).
When importing and compiling on the new server, getting errors as below - with #6301: SAX XML Parser error prominent - on a number of the imported files, all containing data transformations or business processes.

Has anyone had success with passing in a collections  property within a SOAP request to a Soap Service in Ensemble? Please reply with how you set up that collections property. I am able to successfully send a SOAP request correctly containing the elements of the collection property to Cache, as seen in a custom soap log file which I am using to troubleshoot. But the collection property in the  Ensemble request is not getting serialized, meaning MyContainers has nothing.

My.Request consists of a property, MyContainers, which can have 0 or more Containers (My.Container)

InterSystems FAQ rubric

You can use the system routine ^DBSIZE to estimate the backup file size (see also Note 1).

^DBSIZE estimates the file size of full, cumulative, and differential backups of the databases selected in the database backup list.

The database backup list is created from [System Administration] > [Configuration] > [Database Backup] > [Database Backup List] in the Management Portal.

For more information, please refer to the document below.

Estimate backup size with ^DBSIZE [IRIS]

Estimate backup size with ^DBSIZE

An execution example is as follows.

Curious if anyone has modified the HL7 TCP/IP Service and adapter class to receive an HL7 message, ACK it, and just dump it straight to a file? I don't want the messages in the engine at all - just receive and dump. Has anyone done this before and have code you're willing to share?

Thank you very much in advance!

Hi Guys,

is there a way to include a simple table view in a Zen page without having to use &html tag, I just would like to organize my fields as attached?

Thanks

Effective May 16, documentation for versions of InterSystems Caché® and InterSystems Ensemble® prior to 2017.1 will only be available in PDF format on the InterSystems documentation website. Local instances of these versions will continue to present content dynamically.

I'm using the EnumerateJobStatus query of class Ens.Util.Statistics to obtain the LastActivity value of a Business Host.

I would expect that this would return the timestamp of the last message received by the BH, understanding that any connect/disconnect activity would reset that timer. However, the time returned appears to actually be the time at which Ens.MonitorService generated the alert and is not directly related to anything that happened in the BH itself.

Hi everyone,

I'm currently developing a TCP inbound Service to read some XML sent from a TCP Operation that uses EnsLib.TCP.CountedOutboundAdapter.

1) I have tried EnsLib.TCP.Inbound adapter but that gives this error:

ERROR <Ens>ErrException: <METHOD DOES NOT EXIST>zinitConfig+7 ^Ens.Host.1 *%New,EnsLib.TCP.InboundAdapter -- logged as '-'
number - @'
Set ..Adapter = $classmethod(..#ADAPTER,"%New")'

Due to this, the adapter is unable to start listening for incoming connections.

I am running into an error trying to send an Alert Email to test the functionality of IRIS HealthShare Health Connect  2022.1 compared to Cache HealthShare Health Connect 2018.1.3. I was trying to send an Alert email, when I am getting the following error on my EMailAlert operation which is using EnsLib.EMail.OutboundAdpater.

I verified the message to the EMailAlert was populated, so what could be throwing this error...

InterSystems FAQ rubric

Migrating data to another system takes two steps.

1. Migrating class definitions

To migrate the class definition to another system, export it to a file in XML format or UDL format (extension .cls).

The export procedure in Studio is as follows.

Tools > Export

> Select multiple classes you want to migrate with the [Add] button

> Check [Export to local file]

> Confirm that the file type is XML, enter a file name, and click [OK].

After this, import the exported XML and UDL files in the studio on another system. The import procedure in Studio is as follows.

Tools > Import from Local

Hi Guy,

when running a query on properties with by default it shows  VALUELIST, how can get DISPLAYLIS, in my class methods not SMP? 

Thanks

InterSystems has corrected a defect that can cause corruption of databases and journal files on AIX systems with IBM POWER8 or later POWER processors. This defect can be triggered only when database or journal encryption is in use.

 To trigger this defect, the following conditions are required:

• The environment uses database or journal encryption
• The environment also uses data-element encryption
• An encryption key used for data-element encryption has been deactivated

I am wondering if anyone has created a custom dashboard that can be accessed outside of the Ensemble environment.  What I am looking to do is create a dashboard accessible from a person's computer, on the same company network as Ensemble, that can display information regarding specific services, operations, processes, queues, etc.  I don't want to give a user access to Ensemble, just allow them to display a page in their browser to give them the information they need to make sure their processes are running.

Hi everyone,

Before delving too deeply, I was wondering if anybody else had already looked into or had developed a tool that extracts all the elements of a production into a spreadsheet, global, array, object etc.  i.e. the Services, Processes and Operations within a production, and pulled particular properties/settings of those elements into a table - such as Ports, IP, Class, Adaptor, Timeout etc.  ideally I want to present into a web page but if you have a different outputanything that exists will be helpful.

Deltanji 7.1 is now available.

Key updates include: 

* Interoperability Production component driver included, for customers who have purchased the add-on. You can watch a short demo of it here.
* Implement multi-select delete of objects and components
* Add setting to give a passable Beyond Compare launch command line
* Support simplified Locations & Routes diagram 

For more information, read the release notes here >> https://bit.ly/3mHyJHc

Please get in touch with support@georgejames.com for your release kit. 

The update is also available for Serenji debugger users on VS Code, which has the Deltanji solo edition embedded. Simply update the Serenji extension to version 3.2.3 or later and load the server-side code. 

Hi Community,

I am new to ensemble development, Can anyone share me few basic Concepts which will be helpful for Converting JSON message to other message types like HL7,XML 

Thanks,

Joe

 i use %SQLGatewayConnection to insert data to mysql from xml，when if the value`s ascii of any field in the sql equal to 57659 ，

On a developer's laptop, having had two or three Ensemble installs with different settings/config changes made, and encountering unexplained errors compiling classes, wanting to scrub as much of the previous installs off the machine before doing any fresh installation... But can't find clear documentation on doing a complete uninstall!

Have stopped the server.

Am I safe to remove C:\InterSystems\Ensemble (for the instance installed into that folder)?

What other files/Registry/locations contain references to an Ensemble install, and are there tools or documentation on clearing those out?

I'm always on the lookout for tools that make the development and testing of my interfaces more efficient. A couple of years ago I came across HL7 Spy, from Inner Harbour Software. It quickly became my go-to tool for running message comparison reports for interface engine migrations, message statistics gathering, and troubleshooting message receipt and delivery. It also offered enhanced functionality for things like fetching messages via sftp that other tools don't provide.

I've recently been working with HL7 Spy's author, Jon Reis, to enable support for fetching messages directly from the Ensemble message store. Its SQL Loader feature now has native Caché/IRIS support, and I've contributed a small server-side class to support the extraction of messages using it.

Hi Guys

How can I refresh a dataCombo after saving a new element in it?

I've the following dataCombo and after saving a new element I would like to fresh and reload that data in it?