#Caché

This is a series of programming challenges for beginners and experienced Caché programmers.

For an introduction : go to article https://community.intersystems.com/post/advent-code-2016-day1-no-time-t…
 

Remember the assembunny language we had to code on day 12 (https://community.intersystems.com/post/advent-code-2016-day12-leonardo…)?

There is a new instruction we have to implement which toggles an instruction x lines away (further or back).

• For one-argument instructions, inc becomes dec, and all other one-argument instructions become inc.
• For two-argument instructions, jnz bec

Dear community!

What do you think about webinar "Declarative programming on COS"? I want to do such one.

I am going to tell about main points of declarative programming and how you can implement it in your real projects.

Please feel free to write your opinion here.

Please if you wish to become a member of such webinar write me a message to atygaev.mi@gmail.com with subject "webinar".

I am in Atelier editing a Class.

I want to look at the window or pane that shows my Properties, 

I get to the tab that show Properties and their Value as shown below.

Now, how do I get the properties from my Class into the image below?

This is a series of programming challenges for beginners and experienced Caché programmers.

For an introduction : go to article https://community.intersystems.com/post/advent-code-2016-day1-no-time-t…

The goal of today's challenge is to copy data from one disk to another, problem is that the disks are not directly connected. Luckily they are in a huge grid, and you have to find a way to copy the data through adjacents disks, while honoring the disk usage (you cannot copy to a disk where data is already stored).

The input is a df-like disk usage listing.

The first challenge is to calcu

Hello, this is going to be a stupid question, yea I know, there are no stupid questions.

Say, I have an Object Property, Name or Count or Title, or whatever.

How can I get a list, or find out all the different ways it can be expressed?

Example:

-Property Name As %Name;

-Property Name As %String="me"

-Property Name As %String [ Required];

But what other parameters, keywords, restrictions, lists, etc. that I can apply to this Property?

I have been search the I/S documentation and so far at least, I cannot find that sort of information, or in one place.

I could search all the I/S classes, but that takes l

This is a series of programming challenges for beginners and experienced Caché programmers.

For an introduction : go to article https://community.intersystems.com/post/advent-code-2016-day1-no-time-t…
 

The challenge of day 21 is about scrambling passwords.

There are a few functions you need to implement that will do operations on a string :

- swap position X with position Y : means that the letters at indexes X and Y (counting from 0) should be swapped.
- swap letter X with letter Y  : means that the letters X and Y should be swapped (regardless of where they appear in the string).

Hi there,

The problem is, that I need use the property value of datacombo in other  datacombo with parameter.

The follow a example code: 

<dataCombo id="Grupo_Producto" name="Grupo_Producto" dataBinding="bdGrupo" size="40" 
label="(*) Grupo" dropdownWidth="400" dropdownHeight="100" loadingMessage="Cargando..."
columnHeaders="Codigo, Nombre"
queryClass="Innova.CL.Core.BD.Configuracion.Operacional.Grupo" queryName="obtieneGrupoProd"
 sqlLookup="SELECT Nombre FROM Innova_CL_Core_BD_Configuracion_Operacional.Grupo Where ID = ?"
 >
</dataCombo>
<dataCombo id="Linea_Producto" name="Linea_Producto" dataBindin

Hello Community,

I have a simple question but somehow hard to find the solution:

this is a property in my class:

Property RelationAID As ZenCrm.Relationtypes;

this is my method to save:

ClassMethod PopulateMatrix(tvar1, tvar2) As %Status
{
set RelationMatrix=##class(ZenCrm.RelationMatrix).%New()
set RelationMatrix.RelationAID= tvar1
set RelationMatrix.RelationAType= tvar2
do RelationMatrix.%Save()
quit $$$OK
}

However the 'set' line does not work for the 'related properties.

I have tried: set RelationMatrix.Relationtypes.RelationAID but this failed.

Any suggestion? thanks!

Application Performance Monitoring

Tools in InterSystems technology

Back in August in preparation for Global Summit I published a brief explanation of Application Performance Management (APM). To follow up on that I have written and will be publishing over the coming weeks a series of articles on APM.

One major element of APM is the construction of a historic record of application activity, performance and resource usage. Crucially for APM the measurement starts with the application and what users are doing with the application.  By relating everything to business activity you can focus on improv

We have an web application accessed using https, that uses CSP technology with frames.

The initial 'login' is via a single CSP page, which then redirects to another CSP page which creates the frames (4 in all) and loads a CSP page in each of those.  For the most part the frames load without error, but sometimes when logging in and sometimes while using the system ' 5916 Illegal CSP Request ' errors occur.

I say 'login' in inverted commas as a Cache login is not performed just an application login, I don't know if that's relevant so thought I'd mention it.

I presume the errors are connected to usi

Does anyone know how to return the sys.process table with the corresponding configname item for each process? Also, is there a key for the Job Type field? 

I have restored one database from backup, but when I query from some of tables,   prompt error :

this error remain after restart Caché service

I can skip this error with %nolock in select query.

My question is: 

1. why there were locks after restart service?

2. Can I release/rollback these locks by sql so I can query without %nolock?

I have a query that I am attempting to run, but inner query is being rolled up into the overall query - per the optimizer (and jobexam observation).  While I know that if the inner query runs first, I will eliminate a number of records (making the result set smaller, and return quicker).

Just an example of what I am attempting to do:

select Account.Name, Account.State, Transaction.Amt, Transaction.Date, Transaction.Service
from Transaction 
left join Account 
    on Account.Id = Transaction.Account  
where Account.Id in (
    Select Account.Name
     from Account
     where Account.Type is not null
  

This is a series of programming challenges for beginners and experienced Caché programmers.

For an introduction : go to article https://community.intersystems.com/post/advent-code-2016-day1-no-time-t…

We are almost there : after this challenge, only 5 days left till the end of this advent of code (I cannot wait to get my life back !) .

The challenge of day 20 is about a list of integer ranges. Some ranges overlap,  but there are also values that are outside any range.

You have to find out what is the lowest integer that is outside any range.
 

More explanation (there is not much mo

This is a series of programming challenges for beginners and experienced Caché programmers.

For an introduction : go to article https://community.intersystems.com/post/advent-code-2016-day1-no-time-t…

Today's challenge is a variation on the White Elephant gift exchange (https://en.wikipedia.org/wiki/White_elephant_gift_exchange), in this case, by a bunch of Elves where only one can have all gifts.

Each Elf brings a present. They all sit in a circle, numbered starting with position 1. Then, starting with the first Elf, they take turns stealing all the presents from the Elf to their left

This is a series of programming challenges for beginners and experienced Caché programmers.

For an introduction : go to article https://community.intersystems.com/post/advent-code-2016-day1-no-time-t…

You walk into a room, step on a tile and hear a loud click...

Traps !

The challenge is about avoiding traps.

You can recognise if a tile is a trap by following scheme :

The first row is a given : a safe tile is shown as . and a trap is shown as ^
For the next rows, the state of a tile is calculated related to the tiles in the previous row (same position, tile left and tile right).

#########
#S| | | #
#-#-#-#-#
# | | | #
#-#-#-#-#
# | | | #
#-#-#-#-#
# | | |  
####### V

<!--break-->

This is a series of programming challenges for beginners and experienced Caché programmers.

For an introduction : go to article https://community.intersystems.com/post/advent-code-2016-day1-no-time-t…

The challenge today is again a-maze-ing (as a wellknown president would say).

The maze has a bunch of doors ( | and - on the drawing), but they can be locked depending on a hash that you need to calculate every step. When you visit a location a second time, the lock on each door can be differe

I'm trying to write a method to Export SQL Privileges from an instance by namespace, user, or roles. I've found two classes that might work:

• ##class(Security.Users).Export
• ##class(Security.SQLPrivileges).Export

One (Security.Users) exports an XML file and the other (Security.SQLPrivileges) exports an SQL file.

Neither of these options allows me to specify specific users or roles to export so I'll have to use them in tandem with something else. Is there something else that I should be using or do I need to find a way to filter on the backend with regular expressions or the like?

Any suggestions on the most efficient way to convert yyyymmdd string to mm/dd/yyyy?

Hi All, I need the what are all the global having subscript and value contain what I have the value.How to find out?

This is a series of programming challenges for beginners and experienced Caché programmers.

For an introduction : go to article https://community.intersystems.com/post/advent-code-2016-day1-no-time-t…

The challenge of day 16 is about generating random data using a modified version of a dragon curve (you can find more info on fractal curves like Dragon here : https://en.wikipedia.org/wiki/Dragon_curve).

First you need to generate data in a loop as follows :

Create an initial state with your puzzle input

Call the data you have at this point "a".
Make a copy of "a"; call this copy 

I'm looking for information, suggestions, video (courses) on make a lot more use of the documatic system already built into Cache,

Probably talked of before within this forum, but after an hour or two of searching, can't find the articles that I mmay have seen before.

I want to do a lot more documenting of my installation, we use and actively comment classes and methods, but I want to take it further by actually documenting the "why" and high level "how" my system works. Documatic seems a good place to put that knowledge.

This may, but probably not after your suggestions, involve creating a class

Can anyone suggest suitable Cache ObjectScript syntax for open/use/read statements on a simple ms-dos text file.
I've tried various examples seen on the web but they appear to be implementation specific.
I used MSM MUMPS many years ago but am now retired & would like to write a few simple routines for my own amusement & mental challenge.
I am using the free Version of Cache (V 2017.1) on my Windows 10 PC. The installation file was CachePCkit_x64.exe
My apologies for this query being very basic.

Hello Caché Guru,

I'm new to Cache system. I'm trying to do something like saving meta data in Relational DB:

I could use "management portal" -> System Explorer->SQL to view individual table's catalog details or print out the column definition. However I need to gather those information for several hundreds of tables in the DB. Is there a way to do it using command line in kind of batching mode?

Any hint and tip is very much appreciated!

Thanks in advance!

Victor

One for Luca, perhaps?

Interesting article here:

https://www.redhat.com/en/blog/containers-aren%E2%80%99t-just-applicati…

Would this be a fit for Cache / IRIS containerisation?

Not sure I fully "get" what's being proposed in the article, mind you.

This is a series of programming challenges for beginners and experienced Caché programmers.

For an introduction and an index of all articles: go to article https://community.intersystems.com/post/advent-code-2016-day1-no-time-t…

The challenge for today consists of capsules that bounce through a maze of spinning discs.
The capsule can fall through a hole of each disc if they hit the disc at position 0,  each disc has a fixed amount of positions that rotate every second.
The distance between the release and the first disc is one second, as is the distance between each consecutive disc as we

I am using Cache FTP classes to download from a FTP site files, that include zip files.

I can retrieve the whole file into a stream, but it contains a lot garbage.

Sample:

PKvªZK!—XÃ×$¯²4rNDDF Plus DB/Counseling Messages/CMM 1.0/RCMMD0_DESCNUnNUCX4NDDF Plus DB/Counseling Messages/CMM 1.0/RCMMD0_DESC´½[“ÛH’.ø¾fûð²ê*›¬ï—Q[›©n]²î®Ò–ª§Ï>‚$Hbؑ)ÊâÇ÷Ï=¸P™9gmlª•„‡.~ý|4Íñ)>$Uôîòäú6K“2Jó(ù¼MªŠþ2»¢J*ócåÅ%ºÄIt*JúO²K·iž˜Ë1Σ´ŠÊd[œNI¾Kvÿ÷ÿ5&faìÛ]|Nñçh_”Ñö˜f»2ÉMg4A´KiÜ%ÙE›+Qo/Ei~-d0VQl˜s ;­¢š¦)£ñ$º–˜lj>]xL|‰Ê¢8E—ätNÊøR—‰‰ŸxdI¿V4iz8^^Dþ3óþ±Hwî©«h[ä—8ÍÓüUñ)1ô’.&ùå›ê[¥..GºK7Æxcè
 

Is there a way to copy the

In trying to understand Atelier I am directed to go through its hierarchy type of documentation.

Is the Atelier documentation going to continue as a hierarchy or at some point is it going to be integrated into the InterSystems type of documentation?

When looking for an answer it would be nice to use only one method.

Hi,

How can i create Task for background process and use JOB in that task.

Hi, folks!

Consider I need to perform some logic which should fire because values of object properties has been changed.

Is there ANY reason for using class callbacks %OnBeforeSave or %OnAfterSave instead of Trigger?