Hey Developers, 

Create a relational schema from your FHIR repository for building analytics and decision support:

⏯ Introduction to the FHIR Schema Generator

I am looking to separate out a variable into 3 other variables

Basically

S REC="CANTON,TX.,75103"

S ZIP=$ZSTRIP(REC,"*","AaBbCcDdEeFfGgHhIiJjKkLlMmNnOoPpQqRrSsTtUuVvWwXxYyZz,.")   RETURNS "75103"

S STA=

S CTY=

I am having trouble stripping the other info, any help would be greatly appreciated and I do realize there is a better way to strip the zip, I just haven't found it yet.

Thanks in Advance!

Hi Guys.

I'm a newbie in productions and services and I'm using this code to get HTTP response with JSON file, is a way to do this via a production service?

set Httprequest = ##class(%Net.HttpRequest).%New()
  Set Httprequest.SSLConfiguration="RTLS"                              
  Set Httprequest.Server="serverurl"                 
  Set Httprequest.Https=1
  Set Httprequest.Timeout=30
  S Token="sometoken_value"
   set Httprequest.ContentType="application/json"
Do Httprequest.SetHeader("Accept","application/json")
Do Httprequest.SetHeader("Authorization","Bearer "_Token)
   set tSc = Httprequest.Post(

You have read about OAuth2 / OpenID Connect but you don't know how to use it? Have you ever needed to implement Single Sign-On (SSO) or secure web services based on tokens? Did you have to add authentication / authorization to your web applications or services and you didn't know how to start?

What about a step by step example where you can set up an authorization server, a client and a resource server? Here you can find an example where you will configure InterSystems IRIS instances to act as each one of these OAuth2 roles.

A brief introduction

Authentication is the process of verifying that

Hi Guys,

I'm using the below code to get a JSON file using a Token, I can get json file with not problem from the the command prompt as below,

curl -X 'POST' \
  'https://vibra-api-dev.azurewebsites.net/api/jobs' \
  -H 'accept: */*' \
  -H 'Authorization: Bearer

Hi Team

I have enabled Data Quality manager on InterSystems healthshare Patient Index and the  SSN field holds south african Identity numbers on our system.

I would like to modify the rule to validate according to South African ID number and not SSN. Data quality manager classifies this South African Identity numbers as Invalid because the rule is based on SSN.

Please see the current and default SSN rule below and advise how I can go about accomplishing this  task, if anyone has that rule please share how it's done.

I want to embed the DTL editor in a third party web application.

If I open up the DTL editor then the full management portal banner is displayed.

http://localhost:52773/csp/healthshare/user/EnsPortal.DTLEditor.zen?DT=Foo.NewDTL1.dtl

If I open the same DTL in studio then I get just the editor, the banner is not displayed.

The DTLEditor page has the property studioMode that controls the banner display, but its not obvious how this is set.

Q. Is there a way to control that property without extending and shimming the page?

Q. Could there be a URL parameter or header that controls that value?

Q. If I

Hi Community:

Just thought I'd let you know about all the HL7^®FHIR^® content we've planned (and finalized) for Global Summit.

There’s something special this year for anyone new to the standard and for those of you who don’t have technical backgrounds. On Monday afternoon, June 20, we’re hosting a special four-hour workshop led by Russ Leftwich, MD, with Laura Heermann Langford, Ph.D., RN, FAMIA. You’ll learn what FHIR® is, how it works (through a hands-on exercise), and how it is revolutionizing data interoperability and the healthcare data standard of the future.

Then Product Manager Patrick

Hello IRIS Community,

InterSystems Certification is developing a certification exam for IRIS system administrators and, if you match the exam candidate description given below, we would like you to beta test the exam. The exam will be available for beta testing on June 20-23, 2022 at InterSystems Global Summit 2022, but only for Summit registrants (visit this page to learn more about Certification at GS22) . Beta testing will open for all other interested beta testers on July 18, 2022. However, interested beta testers should sign up now by emailing certification@intersystems.com (see below for

Free certification exam attempt for all registered attendees of Global Summit 2022!

InterSystems is proud to offer free InterSystems Certification exam attempts ($150 value) to all registered attendees of InterSystems Global Summit 2022. The free exam attempt will be made available for any of the 7 live-proctored sessions during the Summit.

I am currently studying for the HealthShare Health Connect HL7® Interface Specialist exam. Does anyone have any tips? 

Thank you!

This month, try a new learning path to see how you can use InterSystems IRIS® data platform as the back end of your application. You can also listen to the latest podcast episode on accessibility, explore new product home pages in the documentation, and take a classroom course. Find all the details—and other learning resources—in the May 2022 newsletter.

Hi all

I'm working in Zen - how might I get the name of the currently logged in user?

Andy

Hi Guys,

I'm running Ensemble 2014 and I'm using this to convert JSON to object:

class(%ZEN.Auxiliary.jsonProvider).%ConvertJSONToObject

 but how can I convert to %CharacterStream because I'm saving a %CharacterStream field

Thanks

Hey Community,

Check out the latest video on  InterSystems Developers YouTube channel:

⏯ Drinking Our Own Champagne: InterSystems AppServices' Move from Zen Reports to InterSystems Reports

Hi everyone, 

I am currently performing a patient merge thorug ADT^40 HL7 messages. In order to do that, I am following this guide which I found on the ducumentation: http://10.41.11.210:57772/csp/docbook/DocBook.UI.Page.cls?KEY=HESUP_ch_IHE#HESUP_IHE_configuring_registry_PIX
My main issue regards the fact that I can't update the PatientID and the SourcePatientID of the HS_Registry.Document table of the prior patient, wheras, I find only the new anagraphic on the HS_Registry.Patient table.

To do that I have created a process in my BUS prodaction which create the MergePatietRequest to send to the

Colleagues, hello!

In this article, I will tell you how we reduced the report generation time from 28 minutes to 1 minute. Let me tell you how we achieved this.

I hope that if necessary you will be able to reproduce the same results for yourself. Useful links will be inside this post, so read to the end.

Let's start.

Report

We are reporting for a company using Adaptive Analytics and InterSystems Reports Server.Previously, this report was generated in the form of screenshots from DeepSee.In general, it was not bad, but it took a lot of time and did not look very readable.

We need to send some coordinates to a spaceship through a laser beam. To do that we have to encode it, and beam it out into space. Your mission is to implement the encoder with a compression standard. As usual shortest solution wins.

Task

You will receive a string of comma-separated integers and you will return a new string of comma-separated integers and sequence descriptors.

Input

"0,2,4,5,5,5,5,5,3,4,5"

Output

"0-4/2,5*5,3-5"

Note

• Compression happens left to right
• A sequence of 2 or more identical numbers is shortened as number*count
  • example: "5,5,5" is compressed to "5*3"
• A sequence of 3 or

Hey Community,

Meet the new video on InterSystems Developers YouTube channel:

⏯ InterSystems IRIS FHIR Server

Do you have cases using datadog to monitor intersystems products?

So it appears that this feature is still missing in 2022.1 (https://docs.intersystems.com/iris20221/csp/docbook/DocBook.UI.Page.cls…).

Does anyone have any thoughts or ideas on how to create Namespace Package Mappings on deployment in a 'neat' way during automated deployment?

  I really like the ability to use merge cpf on deployment of our servers, but this one missing action is kind of holding me back.  Appreciate if anyone else has encountered this and how they approached it.

Cheers.

This package offers a utility to export an XLarge Global into a JSON object file and to show
or import it again. In a previous example, this all was processed in memory. But if this is a
large Global you may either experience <MAXSTRING> or an <STORE>  error
if the generated JSON structure exceeds available memory.
 

Academic refers to the structure created.

• each node of the Global including the top node is represented as a JSON object
• {"node":<node name>,"val":<value stored>,"sub":[<JSON array of subscript objects>]}
• value and subscript are optional but one of them always exists for a valid

Continuing on the journey of implementing %UnitTest, @Timothy Leavitt's Test Coverage package, and automated testing with Jenkins.

My question today: why do we utilize a unit test root directory?  

I've been defining packages and classes to write unit tests as I've been developing and I run the tests on the command line or using a routine file that is setup as a debug target which has been working great.  I use DebugRunTestCase() to do this (so the classes aren't deleted).  

As I am playing with automating this on Jenkins, I'm not understanding exactly why we just don't keep and run them on the

Prospects, Customers, and Employees can now download IRIS and IRIS for Health both Community and Enterprise editions on https://evaluation.intersystems.com 

This will allow for new features not yet released to be tested by prospective customers and current customers to sample the latest and greatest that is in the works.

How to View:

For Prospects simply selecting an option with "(Preview)" in the Name will allow for download of preview software

For Customers and InterSystems Employees - simply toggle the Preview Checkbox and this will include preview software in the menu dropdown for available

Hi All,

Can you please guide me on how to programmatically write objectscript task to export audit log to a directory and what type of task should I set it to.

I want to achieve the same behaviour on the code as seen below 

Hi

I have a few Zen pages, one of which is implementation of %CSP.StreamServer which I'm using to download a PDF file, however, any file downloaded is 5Kb smaller than the original. This is the code I'm using:

Class GMECC.DocmanConnect.Pages.downloadGPNotOnHub Extends (%ZEN.Component.page, %CSP.StreamServer)
{
    ClassMethod GetId()
    {
        Quit$Get(%request.Data("filepath",1))
    }

    ClassMethod OnPreHTTP() As%Boolean
    {
        set filepath = %request.Get("filepath")
        
        set tFs=##class(%Stream.FileCharacter).%New()
        set tFs.Filename=filepath

1. Fhir-client-python

This is a simple fhir client in python to practice with fhir resources and CRUD requests to a fhir server.
Note that for the most part auto-completion is activated, that's the main reason to use fhir.resources.

GitHub

• 1. Fhir-client-python
• 2. Prerequisites
• 3. Installation
  • 3.1. Installation for development
  • 3.2. Management Portal and VSCode
  • 3.3. Having the folder open inside the container
• 4. FHIR server
• 5. Walkthrough
  • 5.1. Part 1
  • 5.2. Part 2
  • 5.3. Part 3
  • 5.4. Part 4
  • 5.5. Conclusion of the walkthrough
• 6. How it works
  • 6.1. The imports
  • 6.2. Creation of the client
  • 6.3.

Hi Guys,

How do I create a JSON with the below structure pls:

{
  "field 1": "123",
  "field 2": "1.1.1",
  "field 3": "4.428",
   "Lines": [
    [ 0.00523, 0.00952, 0.01626 ],
    [ -0.00303, -0.00286, 0.00387 ],
    [ 0.00110, 0.00814, 0.00800 ],
    [ -0.00991, 0.00952, 0.00800 ]
  ]
}

thanks

In various tests I used both and found no real reason to prefer the one or the other.
Eventually I missed some limits. At least I didn't hit any.
What is the general opinion?
Where to use the one or the other?

Hello Team,

Need help on HL7 message processing without use of Ensemble. Any sample code on how inbound HL7 messages  using TCP/IP streaming mode can be processed through COS?