Good morning,

First of all thanks for your help and time.

We find ourselves at a crossroads in our development journey, and we're reaching out to the community for insights and guidance regarding a critical aspect of our data management strategy.

Our current challenge revolves around the persistence of data in Globals, specifically when it comes to purging. The issue at hand is that, despite purging, data stored in Globals under the current %Persistent classes remains intact. To address this, we are contemplating a shift from %Persistent to %SerialObject for each relevant class.

Hey Developers,

Watch this video to learn how UC Davis Health uses InterSystems API Manager to satisfy business-partner demand for access to both custom and FHIR APIs:

⏯ How UC Davis Health Uses InterSystems API Manager @ Global Summit 2023

InterSystems FAQ rubric

There is no need to recompile the routines after the version upgrade, but since the version update overwrites %SYS, user-created INT and OBJ format routines (*.INT,*.OBJ) in %SYS will be deleted. Therefore, you need to be careful. 

MAC, INT and OBJ routines with the following names are not deleted.

%Z*.INT, %z*.INT, Z*.INT,z*.INT
%Z*.OBJ, %z*.OBJ, Z*.OBJ,z*.OBJ

Please note that classes/CSPs need to be compiled after upgrading.

However, if you are upgrading to a maintenance release, no compilation is required. For details, please refer to the document below.

I am using the event logger from CSP gateway with level "v9r" enabled, in order to dump the raw content of some HTTP requests.

I would like to decode the body response data, when it's in binary form. AFAIK the event logger will convert characters outside the 32-127 range (EBCDIC) to the "\xff" notation (where ff is a hexadecimal value). Here is an example :

Is it possible to get a code quality stamp of approval on the Open Exchange with an application written in Javascript?
My Iris Whiz application is a browser extension written in Javascript and I wonder if having the code quality stamp missing from my application page will put people off from using it.
 

Does Using the %REST.API Class work with Swagger OpenAPI version 3? I got an error when I tried it on IRIS 2022.2

ERROR #8738: Correct OpenAPI 2.0 version was not specified: . <$.swagger>

I just realized that operating system command execution does not work on Windows console if the IRIS service is started using a different user than Local System account (the default).

I always change the user configured in the IRIS service and I believe this is a standard good practice, particularly in "real" environments (be it production, stage, test or development) that are part of Windows Active Directory Domain.

Here you'll find a simple program that uses Python in an IRIS environment and another simple program that uses ObjectScript in a Python environment. Also, I'd like to share a few of the troubles I went trough while learning to implement this.

Python in IRIS environment

Let's say, for example, you're in an IRIS environment and you want to solve a problem that you find easy, or more efficient with Python.

You can simply change the environment: create your method as any other, and in the end of it's name and specifications, you add [ Language = python ]:

Dear Community, 

We'd like to take this opportunity to congratulate you on the upcoming 🎄 Festive Season 🎄and wish you a joyful holiday season filled with the warmth of 🧑‍🏫 shared knowledge, 🫂 the camaraderie of fellow members, and the anticipation of 🧑‍💻 exciting projects and contests in the coming year!

Can you provide a specific version number？thx

Dear Community,

i need help to access to a Global like ^name over ODBC (SQL)
i will visit this global in a loop from a php site. It a access over SQL or ODBC possible?

Thanks for help and marry Christmas

Hi,

I would like to work on the CSS code of the IRIS web portal.

I want to change the color of the upper horizontal banner for all users.

The name of the div is portalTitle. I was unable to locate the CSS classes file in VS Code or in the file system.

Thanks.

I got a problem to resolve, to sum it up I need to extract a function body from a JS file with cos.
I already got the JS code in a string and the function name but I'm kinda stuck as to how to get my function body, I already tried a few things (regEx, counter bracket) but there are comment and strings that block them from functioning. Is there a javascript parser or a good way to do it except by creating a javascript parser?

Hello DC members,

Considering the unparalleled success of last year's activity, we've decided to prepare it for you once more. So, without further ado, welcome 

🔥 YOUR 2023 RECAP 🔥  

Hi Developers,

Enjoy watching the new video on InterSystems Developers YouTube:

⏯ Caelestinus 2023 – Final DEMO Day

Hi Community,

We know you're eagerly anticipating this moment for an entire year (and we've even got messages asking if it is happening 😉)... Well, the moment is now here!

Join the Advent of Code 2023 with InterSystems and engage in our ObjectScript contest for a chance to win fabulous prizes!

Hi all , 

I just started learning objectScript . Online TEST instance is not opening terminal.

Management Portal (system configuration, direct SQL access, reporting)

Server Address: 
Web Terminal: 
InterSystems Username: tech
InterSystems Password: demo

IDE Connections (VS Code)

Host Server Address: 
Host Server Web Port: 80

External Connections (InterSystems Studio)

InterSystems Studio IP: 
InterSystems Studio Port: 

Help me 

Hello,

I've been running IRIS in a container for a while with the durable %SYS feature. Previously, I was running IRIS 2022.x version and decided to upgrade to 2023.1. During image build, I create some namespaces and install a FHIR repo into one of them using the following script:

Do ##class(HS.FHIRServer.Installer).InstallNamespace()
Do ##class(HS.FHIRServer.Installer).InstallInstance(appKey, strategyClass, metadataPackages)

If one of your packages on OEX receives a review you get notified by OEX only of YOUR own package.   
The rating reflects the experience of the reviewer with the status found at the time of review.   
It is kind of a snapshot and might have changed meanwhile.   
Reviews by other members of the community are marked by * in the last column.

I also placed a bunch of Pull Requests on GitHub when I found a problem I could fix.    
Some were accepted and merged, and some were just ignored.     
So if you made a major change and expect a changed review just let me know.

Hello community,

I am trying to see the complete HL7 message for the class EnsLib.HL7.Message.

But it is showing the truncated version only.

I also tried to convert to stream

d msg.OutputToLibraryStream(.streammsg)
s newmsg=##class(EnsLib.HL7.Message).ImportFromLibraryStream(streammsg)

While (streammsg.AtEnd = 0) {
     Set len = 1000
        Set tPrintMessage=newstream.Read(.len)
     Write tPrintMessage
}

But when i print it, its not showing complete message.

Any idea or suggestions?

Thank you in advance.

Jimmy Christian.
 

Hi I want to utilise the file adaptor to pick up some PDF documents however I must not delete the source files from the server.  I can see that there is a setting in the FTP adaptor to not delete from server but not in the file adaptor.  Is there an easy way to do this or do I just need to create a custom adaptor that copies the files to a working location and records in a tracking global when I have done this so that I don't process the same file twice?

While processing large HL7 files via ftp the Business Service errors when trying to deleting the file.  All the messages process fine just the delete step errors.  Is there is setting that would help this?

Hi ,

I'm currently working on a BPL (Business Process Language) in InterSystems Ensemble, and I'm facing an issue when trying to call the SendRequestSync() method within a code activity. My understanding is that SendRequestSync() is part of Ens.BusinessProcess, and since Ens.BusinessProcessBPL extends Ens.BusinessProcess, I believe it should be accessible.

However, during compilation, I'm encountering an error stating that the method doesn't exist in the class.

Am I missing something here? Is there a specific way to access SendRequestSync() in the BPL code activity?

1. IRIS RAG Demo

This demo showcases the powerful synergy between IRIS Vector Search and RAG (Retrieval Augmented Generation), providing a cutting-edge approach to interacting with documents through a conversational interface. Utilizing InterSystems IRIS's newly introduced Vector Search capabilities, this application sets a new standard for retrieving and generating information based on a knowledge base. The backend, crafted in Python and leveraging the prowess of IRIS and IoP, the LLM model is orca-mini and served by the ollama server. The frontend is an chatbot written with Streamlit.

Hi,

The system I am working on processes large numbers of records. Inserts, updates and so forth. There are multiple processes that can potentially work on the same table at the same time. 

It is an almost impossible task to try and time these processes to not run at the same time, due to volumes, SLAs, etc.

Every now and then there are a few locking issues, Not many considering the volumes. It is just a bit of a nuisance as we need to reprocess these records later.

All the selects on the processes run at IsolationMode 0 and the transactions are kept as short as possible.

Hello everyone,

I'm currently conducting tests using the docker image intersystemsdc/irishealth-ml-community:latest. I'm accessing the Linux terminal and attempting to utilize the superuser functions, but I'm encountering an issue with the password. Could someone assist me, please?

Best Regards,
Flávio

InterSystems FAQ rubric

If multiple InterSystems products are installed on the same system, the latest version of the InterSystems ODBC driver among the installed products will remain registered in the driver manager.

You can change to any driver by changing the registry entry below.

 Please note that running RegFiles.bat does not change the ODBC driver.

The registry entry is as follows.

HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST.INI\InterSystems ODBC35 key Driver
HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST.INI\InterSystems ODBC35 key Setup

In the wew versions of IRIS the Studio is going to be deprecated. In the Studio when editing classes there is an option to add information at package level, with the option "Package Information" that shows this dialog:
 

In VSCode there is the option to add/edit this package information? If no, how can one add/edit this information without the Studio?

Thanks.

Hello!

I wonder how to select a conditional value from a Table column that has lists of values?
Example: I have a table in the database that looks like below:

For example, I want to know which Itemname it is for number 10 that is in the IDList. What should this SQL syntax look like? I have tried %INLIST and other things but only get blank value. How should the SQL-syntax for that query look like?

Greatful for all tips.
Regards,
Michael

Occasionally, in VSCode, compile errors stop displaying. I'll be getting errors on compile all along (expected, and it compiles while saving using CTRL+S), until they'll suddenly stop. I haven't found any solution, including restarting VSCode and restarting my user session in Fedora. I'm running IRIS locally on Fedora and running VSCode also on the same machine. The only solution I've found is to restart IRIS. It's a solo dev environment and relatively small, so restarting isn't anything but an annoyance.

Are there any known bugs around this or any other solutions?