New post

#SSL

6

Secure Sockets Layer (SSL) is a standard security technology for establishing an encrypted link between a server and a client - typically a web server (website) and a browser, or a mail server and a mail client.

Learn more.

I have 2 instances of Cache, one of 2010 and the other 2016. On both I have created a SSL Configuration with same name.

When I connect to a SOAP Service Client from Cache 2010, I get the above error.

If I connect from Cache 2016, the connection get through.

How can get more details of the error in the Cache 2010 instance to be able to fix this issue.

I have enabled the SOAP Log and it does not give much of details.

Regards

Anil

1 6
0 5.1K

Hey guys.

I'm having trouble using the Certificate in my BO.

It started to occur after updating the certificate.

I have 2 configurations and 2 certificates, the first one was updated and no error occurs, the second one, the bad certificate or Handshake failure errors occurs. Both have the same configuration.
I already tried marking SSLV3, handshake error occurs. When I unchecked it, a Bad Certificate error occurs.

0 4
0 3K

Hello everyone smiley

I have a server configuration in a CSP Gateway installed on a PC (let's call it S2) different from the main one (let's call it S1). This configuration allows me to access a web application that is installed on S1, from a client C asking S2 for this webapp. But for now it works only in HTTP between C and S2, and we would like to use HTTPS (as it already works between S2 and S1).

1 8
0 1.7K

I have built an Ensemble SOAP service (EnsLib.SoapService.Service) as a business service which accepts soap requests from another application. To secure the traffic between the SOAP service and the application i'd like to enable SSL. I see that in the management portal I can upload the certificates, chains and keys and save them as an SSL / TLS configuration. However, it is not clear to me how I apply this SSL / TLS configurtion to the soap service I am running.

0 2
0 1.6K

Hi,

I can't work out how to use the Cache CA Server to process certificate request from external clients!

We are setting up an interface where we use SSL/TLS 'Mutual Authentication' to allow a client system to securely transmit document to our server. (they are off-site and hosting a service for us)

I am not a security expert, but my understanding of setting up mutual authentication where my instance of ensemble is the server, and it is receiving messages from a client is as follows

0 5
0 1.6K

I am using OAuth2 Cache framework, acting as a client to an authorization server. My setup is based on this excellent previous post [Caché Open Authorization Framework (OAuth 2.0) implementation – part 1].

I'm facing ‘Authorization Server Error: Error Processing Response - No match between server name 'googleapis.com' and SSL certificate values google.com…’

It looks like I should set SSLCheckServerIdentity to false but I can’t figure out how. Has anyone had the same issue?

0 4
0 1.2K

We are in the process of setting enabling SSL on a soap web service exposed via InterSystems, but are running into trouble. We have installed our certificates on our webserver (Apache 2.4) and enabled SSL over the default port 57772. However, we now get an error when sending a soap message to the web service (it used to work over http). Specifically the CSP gateway refuses to route te emssage the soap web service:

0 1
0 1.1K
Question
· Mar 2, 2017
TLS Cipher Suite selection

Our client is a test out of 2016.1 (Build 656U) Healthshare that wants to do a one way SSL connection to our Java 1.7/Tomcat 8.0 server. We have yet to come up with a secure cipher set that Healthshare and Java agree on for the handshake. So far we've had to use these ciphers identified which are not recommended (though it does do a handshake properly).

0 1
0 994

I have an Ensemble installation and just build my first RestService (using %CSP.Rest that forwards them to my Business Service). This works nice and fine when I use postman to make REST calls over http (port 57772). However when I attempt to make a request using https over port 443 I receive the following error:

1 7
0 866

I was wondering if there was a certain procedure or documentation on securing (Https://) the Web Portal into IRIS/Ensemble?

Currently we are using LDAP Delegated Authentication to access the Web Portal using LDAP. However as more and more emphasis is put on securing applications within networks, I can see Management/Security asking us to make sure that the web portal is more secure.

1 6
1 847

OAuth server to be deployed on the IRIS learning cloud platform. Clients - one on the other instance of the learning IRIS server, the other client locally on my computer in the container docker.

Both clients get a seemingly correct link (through ##class(%SYS.OAuth2.Authorization).GetAuthorizationCodeEndpoint()) to the login request form:

1 3
1 769

Hi community,

I would like to ask how to correctly enforce SSL on all "developer traffic" -- that is Management portal and Studio connections -- on a Caché instance.

Given large developer permissions, I would like to eliminate all plaintext credentials on the wire.

Currently, we compile our own httpd with SSL support for Management portal, but this breaks Add-Ins for us, in particular the SOAP wizard. So I guess this is not the "canonical way".

Thanks for any suggestions

Jiri

0 12
0 636

Hello Community,

I want to secure a SOAP Webservice (an EnsLib.SOAP.Service one, if that matters) adding a SSL/Username Policy to it. As im not sure how detailed my request here should get, ill try giving a detailed as-is description of my setup, what I've tried, how I tried to test the connection and what problems including some logs I ran into.

As a small foreword: I'm pretty new to the whole security aspect of intersystems and soap itself.

System:

1 3
0 614

I have an Ensemble installation with an FTP business operation which I would like to connect to a server over SSL in explicit mode (see also: https://www.rebex.net/kb/tls-ssl-explicit-implicit/default.aspx). I keep running into timeouts while attempting to do this via Ensemble. Does Ensemble actually support SSL in explicit mode??? Because I can't seem to find any setting where to switch it on.

0 1
0 532

Hello,

Recently I have been tinkering with VSCode and ObjectScript extension to connect to my dockerized IRIS instance. I have configured the instance to use Apache as a Web Gateway as per instructions and it has been working well. Currently I'm using a self-signed certificate for the SSL part of the connection. The browser nags about insecure certs when connecting to Management Portal but that's expected.

However when I try to connect to the instance with VSCode it simply fails with the following error message

0 8
0 527

I am trying to connect the external application. Authenticating via Two SSL,

I have the Client Cert, Private key and the Root Certificate

The connection is successful from local (both via terminal and as well via Postman)

But when trying from IRIS application by configuring the certificates in the SSL configuration, i am not able to successfully verify the SSl connections

When test from the ssl configuration with the endpoint and port its gives the error Error #988: SSL connection failed. SSL/TLS error in SSL_read(), SSL_ERROR_SYSCALL: I/O error (54)

0 7
0 517

I'm trying to implement an OAuth2 server, but I have som issues when trying to setup JWT under OAuth 2.0->Client.

I get the error message saying "No match between server name 'localhost' and SSL certificate values 'cache'". I have set up a SSL/TLS configuration as simple as possible without any certificate files. I'm accessing my server via HTTPS with an unsigned certificate.

Can anyone point me in the right direction on how to resolve the issue I'm encountering.

0 1
0 483
Question
· Jun 29, 2018
Adding TLS to ZAUTHENTICATE

I wrote a ZAUTHENTICATE.mac a couple of months back, and found recently that it is creating coredumps on almost a nightly basis. I think I have figured out this problem to be not clearing out my MsgSearch after I am doing 2 of them within the code.

1. Get User Attibutes from AD

2. Get User Groups From AD

So while I am trying to cleanup the code I thought it would be a good time to add a Certificate and TLS to the mix since I should of been using that all along. However I keep running into issues

1 14
0 450

After what is seemed was weeks, I finally got SSL/TLS enabled on both Apache Web Server and IRIS using the Web Gateway. However while we can now use HTTPS to connect to our Development instance of IRIS, I am running into several errors when I have others try to access the Management Portal via HTTPS.

We are seeing...

0 6
0 439

So I have a base string that I want to sign using RSA-SHA256. I have a .p12 file and passphrase to get the RSA Private key using NodeJS (pem.readPkcs12 library), which I don't know how to do that in intersystems as well. (would appreciate if you can include a solution for that too)

The main problem here is I am trying to sign a string and print the result to terminal, using the code below in a routine (.mac file).

0 2
0 431
Question
· Nov 29, 2017
TCP adaptor + SSH Tunnel

Greetings.

We have one vendor who requires us to send data using TCP

through an SSH port forwarding tunnel that is set up in advance.

UNIX scripts maintain this, and the Ensemble interface uses a TCP Adapter.

I was thinking that Ensemble could maintain the SSH tunnel,

which would improve our detecting of issues.

Has anyone done something like this?

I see that the class %Net.SSH.Session has a method ForwardPort,

but it doesn't stand up the tunnel by itself. Instead, it appears

0 1
0 428

I am not sure if this is the correct place for this question, but I am struggling to setup TLS security for our IRIS Management Portal and etc. through Apache and the Web Gateway. I have a couple of questions when it comes to the setup.

  • if I build a private key and certificate within Red Hat, does that certificate have to be on everyone's pc to connect to the Management Portal?
  • Can I use a self signed Certificate?
  • Can I use the existing CA on the server, or do I need to work with my Data Security team to get a Certificate?
0 1
0 408

Hello Community,

when trying to send HS.FHIRServer.Interop.Request objects to an external FHIR server, I get errors: ERROR #6156: No match between server name '...' and SSL certificate values '...'. The reason is pretty clear, the problem is that we don't get correct certificates in time, but have some pressure to go live with the interface.

0 3
0 379
Question
· Mar 2, 2017
Atelier over https

Can Atelier connect to an Ensemble server that only accepts https connections?

How do I configure that? I did try an ssh into such server and Atelier over that but it didn't seem to work.

Any suggestions?

Thanks,

Chris

1 3
0 374

Hello all,

Been doing Ensemble for a while but I am struggling with this SOAP set up.

Currently in Cloverleaf, we are taking the HL7 feed out of Epic, and then we put the SOAP wrapper around it. Then using a CAIR provided wsdl, we seem to be using a JKS file and a PFX file to send the data to CAIR (http://cairweb.org/next-steps-page/).

Here is what I have done so far: I used the SOAP wizard with the wsdl file to create a new Operation.

My questions are these:

0 2
0 352