Within Provider Data Management, I wanted a way to capture the Code Table mapping errors thrown by HSPD.MDM.FlowControl.Process into a Workflow Task for someone to work. However, because HSPD.MDM.FlowControl.Process can get overwritten during the upgrade process, I cloned it into another Business Process so we can use Workflow Tasks to troubleshoot mapping errors.

This new Business Process will send the Errors to the Workflow Task Operation, but because it is not the HSPD.MDM.FlowControl.Process resubmitting the message will not resubmit the record to be processed through HSPD.MDM.FlowControl.

Overview

This release introduces major improvements to storage scalability and performance, a significant operating system upgrade across all offerings, and a new default version of the FHIR Server. Together, these updates enhance system reliability, flexibility, and security while ensuring long-term platform supportability.

Overview

Version 25.20.2 expands global availability, enhances Advanced Security flexibility, and widens Network Connect integrations. This release introduces support for additional regions, new application-aware security rules, and expanded connectivity options for critical InterSystems services.

Overview

Version 25.23.2 delivers targeted improvements to the Advanced Security UI and further streamlines the upgrade and update workflows across InterSystems Cloud offerings. These changes focus on clarity, efficiency, and operational excellence.

New Features and Enhancements

Overview

Version 25.24.1 delivers major enhancements to DNS capabilities, platform reliability, upgrade workflows, and developer experience. This release also includes key fixes and increases in platform limits to better support modern workloads.

New Features and Enhancements

Overview

Version 25.20.1 delivers important security updates, improved documentation resources, expanded customization options for IRIS, and enhancements across Data Studio, Advanced Security, and Health Connect Cloud.

New Features and Enhancements

I am working on building out a Workflow task that captures errors in mapping to specific tables. Within the Workflow task, I would like to give the owner of the task the ability to resubmit message once the mapping has been corrected. Is there a way to do it in a similar fashion to pulling up the Trace ie...

EnsPortal.VisualTrace.zen?SESSIONID=#(%task.%FormValues.GetAt("MsgHdrID"))#" target="_blank">View Message Trace

Is there a one liner that could be called to resubmit the MsgHdrID (Session ID) from its source to post it again?

Has anyone been able to successfully implement a business service to pull files from Azure Blob storage?

I am trying to add validation to a RecordMap, because the source of the data sent file sent us bad data within the file. So, I am using PATTERN to verify certain fields start with Numeric, and Alpha where applicable. When the EnsLib.RecordMap.Service.FTPService runs into an issue it doesn't seem like it continues onto the next record if the record does not meet the validation requirements. 

How can I tell EnsLib.RecordMap.Service.FTPService to log the error and continue onto the next record, so those records that fail are not processed?

I am trying to add some validation to an existing Record Map, because recently we had some wrong data get consumed into the System and is causing all kinds of havoc.

Using the AI on the Developer community it suggested that I use PATTERN within the Datatype Parameters to force some validation on some fields. I have never used PATTERN before...

When I go to generate the updated Record Map, I am getting the following...

By the screenshots is my logic not correct?

gj :: configExplorer is a new VS Code extension integrating with Server Manager and leveraging Structurizr to produce configuration diagrams of your servers.

Here's a short introductory video.

By using the InterSystems IRIS Native API for Node.js it avoids the need for any support code to be installed on the servers. This technology choice also qualifies it for entry into the current Developer Community contest.

The initial release focuses on two aspects of server configuration:

• Namespaces and databases
• ECP connectivity

Suggestions for what to add next are welcome, as is general feedback.

I have a locally saved multiple saved .cls file. How can I bundle them together as a XML file programmatically (ObjectScript) so that I can import in the next environment. Does anyone have a sample code?

Hi, Community!

If you need to help providers meet a payer's documentation requirements, see how the Documentation Templates and Rules (DTR) module of the InterSystems Payer Services ePrior Authorization solution can help:

Documentation Templates and Rules

• HealthShare Unified Care Record Overview – Virtual  December 15-16, 2025
  
  • Overview of HealthShare Unified Care Record® architecture, data flows, consent, and notifications
  • This 2-day course provides an overview of HealthShare Unified Care Record®. It focuses on architecture, data flows, consent, alerts, user management and terminology.
  • This non-technical course provides an introduction to the product for those who do not need the detail provided in the 5-day HealthShare Unified Care Record Fundamentals class.

• Building and Managing HL7 Integrations – In Person December 15-19, 2025 9:00am-5:00pm EST
  
  • Build, configure, and manage HL7^® V2 interfaces using InterSystems integration technologies.
  • This healthcare-focused 5-day course teaches implementation partners, integrators and analysts how to rapidly build HL7 integration solutions.
  • Students build a production that processes and routes HL7 messages.
  • Students learn how to work with the pre-built HL7 business services, business processes and business operations to receive and send HL7 messages.

In my previous article, I structured network communications
in these 3 possible layers, and covered the last

• Client <---> Transport
• Server <---> Transport
• Client <---> Server

In fact, you have the most control over the last one.
The IRIS side as a server is yours and under your full control. 
Up to now, the Transport layer was assumed to be as passive as a bare wire.

This assumption should be verified. I once met a Windows environment with
a quite surprising setup where a Firewall-like filter was isolating internal
processes and causing a lot of trouble.

Chasing errors or misbehavior in the network can be quite a challenge.
Differently to  a local application on the DB server, you always have at least 3 players:

• A client  to place a request 
• some kind of transport layer
• and a server to provide a reply.

This results in a minimum of 3 possible communication layers

• Client <---> Transport
• Server <---> Transport
• Client <---> Server

The last one is probably the easiest  to check, while the other 
two deal with the same counterpart just from opposite sides.

?  Do both ends use the same communication protocol

Hi,

 I have just installed WebTerminal on my local instance of Health Connect 2025.1, but it does not work and returns a HTTP 401 error.

Can any one help, as I have never installed WebTerminal before?

Has there been any changes in Health Connect to stop it working in version 2025.1?

Thanks.

Neil

You may have noticed that to configure a mirror for InterSystems IRIS for Health™ and HealthShare® Health Connect there is a special requirement. I wanted to go through it step by step in this article.

This assumes you have already configured the second failover member and confirmed a successful failover member status in the mirror monitor:

Step 1: Enable HS_Services user (on backup and primary) 

Step 2: Switch to Namespace HSSYS and go to Interoperability > Configure > Credentials.

I would like to share with you a little trick to customize how messages are displayed in the Message Viewer. In particular, how you can display messages as JSON (instead of the default XML representation).

Messages are objects that are used to communicate interoperability productions components. In my example I have defined a message that later I serialize as JSON to send to an external API. This message is defined as a regular message and also as a %JSON.Adaptor so I can export / import directly to or from JSON.

Class interop.msg.DeviceOrderReq Extends (Ens.Request, %JSON.

Can someone give me an explanation of how Local.PD.Linkage.Definition.Individual works? This was setup by another company as part of our implementation.

Below is my configuration..

We are getting a lot of matches on Given Name, but then the Family Name does not match at all, so I am wondering if these need to be adjusted. I just don't understand if they need to be positive or negative.

if I use the MLE CALIBRATION MONITOR, it seems that none of the values should be negative.

Hi everyone, on HealthShare Unified Care Record 2024.1.0 Build, we're using the Analytics section to create a dashboard containing a time chart showing a cumulative curve of the number of documents indexed in the registry for each documentSource of each repository. We tried the following steps: we created a cube whose dimensions are the CreationDate, SourceValue, and repositoryUniqueID of the HS_Registry.Document table; in the Analytics section, we created a pivot table that lists the document creation date on each row, along with as many columns as each repository's documentSources.

Hello, thanks for your time reading this question.

We are receiving each day, alerts from one of our four Production nodes. It always has the same text:

[InterSystems IRIS SEVERE ERROR gchciris4.canariasalud:ENSEMBLE] [Utility.Event] [SYSTEM MONITOR] CSPGatewayLatency(127.0.0.1:443) Alert: CSPGatewayLatency = 5001.304, 5001.233, 5000.964 (Max value is 2000).

We have looked for it in the documentation here:

https://docs.intersystems.com/latest/csp/docbook/DocBook.UI.Page.cls?

When using a EnsLib.RecordMap.Service.FileService business service, is there a way to tell which row number that is being read in? I want to read in a csv, but on the first record, trigger a truncate on the External SQL Table that it is being written to through JDBC.

Thanks

Scott

Overview

This release introduces the FHIR Server 2025.10.0, delivering the latest standards compliance and performance improvements. It also enhances the Health Connect Cloud (HCC)upgrade process for greater reliability and adds new flexibility to Network Connect through prefix list support in VPN configurations.

New Features and Enhancements

Hi, Community!

Looking for an efficient way to allow providers to see whether prior authorization is required? See how the Coverage Requirements Discovery (CRD) module of the InterSystems Payer Services ePrior Authorization solution can help:

Coverage Requirements Discovery

What is XML?

XML (eXtensible Markup Language) is a flexible, text-based, andplatform-independentformat used to store and transport data in a well-structured way that is both human- and machine-readable. XML permits users to define custom tags to describe the meaning and organization of their data. For example: <book><title>The Hitchhiker's Guide</title></book>.

An XML document is self-descriptive and structured as a hierarchical tree of elements. Every document has a single root element that encapsulates all other content.

There is documentation for single dolalr macros but $$$ dollar seems to be referenced on individual pages or not at all.

Introducing IRIS DocDB Explorer: A Sleek UI for Managing JSON Documents in InterSystems IRIS

IRIS offers a dedicated feature for storing and retrieving JSON documents using DocDB, without requiring a predefined schema.

Developers often need a quick and intuitive way  to browse, create, and edit documents without switching between multiple tools or writing repetitive code. To solve this, I created iris-docdb-ui — a CSP-based open-source application that provides a clean, responsive interface for interacting with DocDB effortlessly.

Hello,
I am currently facing the task of retrieving or sending HL7 messages from a web API. Since we only send HL7 messages via internal sockets, web APIs are relatively new to me.
The following is my plan for the new interface:
I have created a new custom business service that periodically sends requests to a business process. In this business process, the HTTP request (HTTP.GenericMessage) is then created from scratch. The special feature is the "Authorisation" header field, where a signature is inserted, which consists of a base64-encoded hash value.