#HealthShare

I'm working on some code that would benefit from being able to see whether or not a project file has been saved in Studio.
I can see when I make changes, that the project name has an asterisk added to it:

In searching for it, however, I haven't been able to find any methods or calls to access the property/check that controls that asterisk.
My question is whether anyone out there knows if that is accessible and if so then how can it be accessed.
I'd like to add a check in my code that enforces that the project file must be saved prior to proceeding with the intended action.

Hello everyone! This is my first post into the developer community and one that I hope is fairly simple to answer. In our environment we currently have 3 different Test environments for testing before migrating code to our Prod environment. Currently we are working on establishing a source control method using Git in house which has been a bit of a struggle. We have also had developers that had used different test and migration methods in the past which has caused some issues with keeping the different test environment in sync.

What I am looking for is an option to either copy a whole

Hey Community,

Enjoy the new video on InterSystems Developers YouTube:

⏯ Integration Production Tools: HealthShare Health Connect & InterSystems IRIS Health @ Global Summit 2024

Hi All

I have created a SOAP Service from a tutorial, using sample code, as follows:

Class Hospital.MyService Extends EnsLib.SOAP.Service
{

/// For this business service, ADAPTER should be "" so that we use the normal SOAP processingParameter ADAPTER;Parameter SERVICENAME = "MyService";Parameter NAMESPACE = "http://www.myhospital.org";Parameter USECLASSNAMESPACES = 1;
Method SubmitMessage(pRequest As Hospital.SoapRequest) As Hospital.SOAPResponse [ WebMethod ]
{
    // Do something with pRequest//set sc= ..SendRequestSync("GetCustomerInfoBO",pRequest,.response)//if

While working with GET request I encountered this situation where FHIR Server return a responseStatusHTTP "HTTP/1.1 200 200" instead of "HTTP/1.1 200 OK" (as highlighted in the attached screenshot).

Although the response code seems valid, these bundles have a total value of 0.

Could anyone clarify what "200 200" signifies in this context? Is there an issue with my setup, or does this indicate a specific condition related to the empty bundle search?

Thank you in advance for your help!

InterSystems has corrected a defect that causes invalid database and journal records to be introduced when using a specific $LIST syntax. The likelihood of encountering this defect is very low but the operational impacts can be significant.

Products Affected

• InterSystems IRIS® data platform: Versions 2023.3, 2024.1.0, 2024.1.1, 2024.1.2, 2024.2, 2024.3
• InterSystems IRIS® for Health: Versions 2023.3, 2024.1.0, 2024.1.1, 2024.1.2, 2024.2, 2024.3
• HealthShare® Health Connect: Versions 2023.3.0, 2024.1, 2024.1.1, 2024.1.2, 2024.2, 2024.3
• HealthShare® Unified Care Record and Suite: Version 2024.2

I am hoping for some guidance.

I am new to creating a new chart in Trakcare for use with Clinical Viewer.  My organization only has LDAP users, (we don't have the ability to use local users), that dictate what role/group a user is in, they are all the same across our Prod, Test, and Dev environments. 

I need to customize a chart for our end users. BUT the how-to's all talk about creating a custom role for the new chart, which if I do this I would have to be added to this role/group which could cause issues with my ability to work in Prod and Test.

In tracking down some of our Orphaned message issues, I was wondering if setting our EnsLib.SQL.Snapshot variable equal to "" was the same as calling the .Clean() method on EnsLib.SQL.Snapshot? Are they the same?

should I be possibly using ##class(EnsLib.SQL.Snapshot).%Delete() instead?

I'm currenlty searching the developers coummnity , but thought I asked this question while  I search.  How can I use the task schedulrer to purge backups? Do i have to create my own class? Examples on doing this?

Hy Friends,

I have a little problem, I need to diplay the data based on input status (first time and after)

this is the data:

and this what I need to display

the notes become new because it is the first time that the data has been inputed, and it will become old if we have the data before (2nd data, 3rd data  the notes will become old).

I've try to use SubQuery (with LAG Script also) but it doesn't works, because it will give a notes Old even it's a New Data

Does anyone could help me ?

Thank You

Best Regards,

Steven Henry

I'm attempting to build a fairly complicated object graph, with nested objects and collections, in order to create a FHIR bundle.

In its most basic form there is a <bundle></bundle> element that represents the root, and there can be a number of nested <entry></entry> child elements.

I'm attempting to represent this as such:

class Bundle (%RegisteredObject, %XML.Adaptor)
{
    Property Entries As List Of Entry;
}

The problem is when this is projected it nests each Entry object within an Entries container, which makes sense but I don't want this.

Hello,

is it possible to kill/suppress hl7 message in the DTL (data transformation).

in cloverleaf, it is common practice to check the value in message, for example pv1:7.9. if the value is certain word(assigning authority) then send the message over to destination, if it is not, kill the message

how would this be done in InterSystems ? does that need to be done in the rule instead? or can it be done in the data transformation? if it can be done in data transformation, how can it be done? 

Thanks

Hi,

I'm trying to create a user with access to the HS namespaces management portal.
I'm having trouble identifying the correct resource to assign to the user. I'm testing various resources, but every time I go to the HS management section, a blank page appears, and the Home button disappears.

Does anyone know the correct resource to assign? (I've already granted Read permissions to the Namespace databases)
Thank you!

Hi!   

I'm trying to set up a Clinical Viewer demo env with HealthShare 2024.2. 
I've done the standard installation following the doc : 

• UCR - UCR demo with IHE
• CV - CV demo

Everything works until I get to the point where I have to enable federated SSO (UCR demo - Federated SSO). Once it is activated, I can no longer access the instance through the portal, and the browser displays the following error:

Checking the messages.log, I see that every time I try to enable federated SSO and access the portal, I encounter the following error:

12/24/24-10:51:55:639 (98515) 2 [Utility.Event] Error in

I have a query that returns around 6000 records that I need to go through and update another MS SQL Table. I would like to execute this once a day. How do you set MaxRowsToGet on a EnsLib.SQL.InboundAdapter service?

Thanks

Scott

Hello,

I was just trying to get to the bottom of a TLS config - we have an interface with a TLS config that has had 'Server certificate verification' set to 'On', however the cert file specified either did not exist or contained a cert that was expired.

Does anyone know what the behavior is for this typically? I would expect this to not allow traffic on the interface, however this has been working fine for a few years now with an invalid cert specified for 'Server certificate verification' and set to 'On'.

Hi!

Suppose I have full access to InterSystems IRIS database instance A and want to export a consistent part of the data and import it into another InterSystems IRIS instance B. Classes are equal.

What are the most general and convenient options for me?

TIA!

Hello everyone,

I want to share my experience configuring an IIS server to enable secure HTTPs access to HealthShare/HealthConnect.

After installing the “WebServerGateway” and completing the initial setup, I encountered a few issues. Specifically, when trying to log into HealthConnect using HTTPS, the logo didn’t appear, and clicking any buttons didn’t trigger any response. See screenshot below:

Below is a step-by-step guide to resolve the current issue, as well as another issue I encountered with accessing the Rule Editor.

Hi everyone,

I'm looking for a tool that can be used as a base to create an interface that allows a non-technical user to easily forward messages. 

The idea is that the user can find an already sent HL7 message and forward it by modifying specific fields of the message without needing any technical knowledge.

An example would be something similar to the Ensemble search engine, but with a less technical and much more intuitive approach and that only allows changing 1 or 2 fields. 

Is there a solution in the community or something that I can adapt for this purpose?

I am attempting to create a Foreign Server/Table so I can pull some information in from MS SQL server via JDBC connection, but as soon as I create the Server/Table and logout the Foreign Server disappears.

CREATE FOREIGN SERVER Epic.Clarity 
   FOREIGN DATA WRAPPER JDBC CONNECTION 'MS-EpicClarity'

logout, then run 

the documentation - Defining Foreign Tables | Using InterSystems SQL | InterSystems IRIS Data Platform 2024.3 mentions "A user that creates a foreign server must have the %MANAGE_FOREIGN_SERVER administrative privilege" but I am not finding that security setting to give to my role.

Doe

Monitor incremental changes in the database through scheduled tasks, display change trends through charts, set alarm thresholds, and write information to messages.log

How to use it

You can install it through Docker or ZPM

Deploying with Docker Prerequisites

Make sure you have git and Docker desktop installed.

Installation

1.Clone/git pull the repo into any local directory

git clone https://github.com/Sara771dev/Database-Size-Monitoring.git

Open the terminal in this directory and run

docker-compose build

Run the IRIS container

docker-compose up -d

ZPM Package Deployment

Open the terminal to run

zpm

Hi, Community!

Great news for HealthShare® customers! You can use single sign-on (SSO) to access your HealthShare apps more efficiently.

🔒Configuring Federated SSO in HealthShare(video, 11m)

Using SSO, you can access all your HealthShare apps at once, including HealthShare® Clinical Viewer and Care Community.

• HealthShare Unified Care Record Overview – Virtual January 22-23, 2025
  
  • The HealthShare Unified Care Record Overview course is a great way for anyone to become familiar with Unified Care Record, but especially those who need to understand its capabilities but not how to configure HealthShare Unified Care Record.
  • This is a non-technical, instructor-led in person training course providing a comprehensive introduction to HealthShare Unified Care Record.
  • This course is for anyone who needs to know about the functionality and architecture of HealthShare Unified Care Record.  (If you need

Please note- the resource should have expertise working in CCDA/FHIR implementation along with IRIS development experience.

IRIS for Health CCDA/FHIR IRIS developer 

1. Hard Core IRIS for Health Engineers who have experience working on IRIS for Health 
2.  CCD/FHIR and conversion services using SDA and DTL model (at least one production implementation of Conversion services to FHIR)
3. Have Good knowledge of GCP and GKE’s (IKO’s deployed on GKE environment or any K8 cluster)
4. Fine tune and debug IRIS Productions, assist L2 ops team when required
5. CICD/GIT knowledge

Hello All,

I am facing an issue where the vendor seems to be sending two structures of JSON messages, but only one of them seems to work in my code.
I need help in allowing both the JSON structures to parse into the engine.

Working Example:

{
    "data":
        {
            "idNumbers":
            [
                {
                    "type":"322","number":"123456"
                }
            ]
            ,"0":
            {
                "con_type":"210"
            }
        }
    ,"meta":
    {
        "secret_key":"","origin_url":"url.co.uk"
    }
}

Not Working:

Context: Extra Square Brackets causing

Hello, 

We noticed from the integrity logs that some of the namespaces in our integration engine are using large amount of space ( ~380GB ) for the global ^EnsHL7.Segment. 

We have culling implemented for large globals like MessageHeader and MessageBody.

Is it a standard process to implement culling for ^EnsHL7.Segment global and any idea about what will be the impact of adding culling to this global?

Not sure if it is possible to implement normal culling task on this Global as I noticed this global content is not accessible via SQL functionality in Management page but only via the Globals in

First time trying to use Foreign Tables/Servers instead of Linked Tables...

Within the SQL Editor inside of the Managment Portal, or connecting through DBeaver JDBC how we can see what Foreign Servers have been defined? Is there a way to query and verify structure of the Foreign Server connection to know that we are building the correct Foreign Tables?

I attempted to create my first Foreign table but it failed when I tried to query the tables because it said the table could not be found. But when I sign into the Database via SQL Management Studio, I can see the table.

I'm attempting to import all the FHIR XSD files provided by http://hl7.org/fhir but get the immediate and unhelpful error message:

I've tried different versions of EOLs to no avail. Any idea what this error could mean?

Here's the XSD I'm trying to import:

<?xml version="1.0" encoding="UTF-8"?>
<!--
Copyright (c) 2011+, HL7, Inc
 All rights reserved.

 Redistribution and use in source and binary forms, with or without modification, 
 are permitted provided that the following conditions are met:

 * Redistributions of source code must retain the above copyright notice, this 
 list of conditions and

Has anybody encountered this before?

I did a very usual hl7 adt transformation DTL, but it is with a customized schema, like ADT_ALL, it is a structure that tries to cover all the ADT schema scenario so we can use 1 type for all ADT messages.

the DTL tests fine in DTL test, with all the segment transformed correctly, but once I put it to test, to send message through source and the message after transformation can only go to MSH, EVN, but won't transform other segment like PID etc.  

Originally I was suggested that in my DTL I didn't loop through all the (), so I changed everything to loop

I am using a JDBC connection to MS SQL server to execute a stored procedure to select data and bring it into InterSystems as a EnsLib.SQL.Snapshot. I loop through the EnsLib.SQL.Snapshot using a while loop, but I also want to iterate through the Columns within that Row to do logic.

Is there a way to iterate through the Columns of the current Row of the EnsLib.SQL.Snapshot so I can apply logic/rules for further processing?

Thanks

Scott