Question
· Feb 28, 2024
Installation hangs

I had some issues with my install so I tried removing the software using Windows Add/Remove programs but it just froze. It messed up my install and now I can't access the SMP.

I tried reinstalling using the same commands I did on first install but it froze again. There were no logs in the installdir that was created. Windows log just shows install started.

0 5
0 228

First of all, thanks for your help, and time reading this question.

Why, when we send a SOAP message from SoapUI to a SOAP service in a HealthShare environment called 'ESBCHUIMI,' it recognizes the 'Credenciales' header, which has 'usuario' and 'password' as properties. This class is a %SOAP.Header.

However, when we load the WSDL using the SOAP wizard from this SOAP Service to another HealthShare environment called ESBSSCC and send it from SoapUI to ESBSSCC, when it is being forwarded from ESBSSCC to ESBCHUIMI, the ESBCHUIMI's service outputs:

0 5
0 217
Question
· Dec 4, 2023
Custom Application Metric

I made a custom application metric, imported it to the USER namespace and used:

set status = ##class(SYS.Monitor.SAM.Config).Add.ApplicationClass("historymonitor.errorSensor", "USER")

to add it. When I do 'w status' it returns 1 so it is added but I still can't see the custom metric in the api/monitor/metrics endpoint. Even though I added %DB_USER in the application roles for api/monitor.

Does anyone know where the problem might be that the metrics endpoint still doesn't show my metric?

0 1
0 174
Question
· Nov 30, 2023
Multitransformations of HL7

This question originally appeared in the comments of the post: Making use of Multiple Sub Transforms in a main map || HL7

I'm having a similar problem trying to get PRD(1) into PV1:ReferingDoctor and PRD(2) into PV1:ConsultingDoc

Running the subtransform will populate referring doctor for the first PRD, and then the second running will delete the PV1, make a new one with only the consulting doctor populated.

0 1
0 220
Question
· Nov 20, 2023
HL7 field for base64 in orl

Hi everyone,

It could be great if some of you have had experience in hl7 v2 messages. The question is about FHIR to hl7 v2.5 conversion. I have to translate a binary resource, encoded in base64 into an orl_o22 message. Do you have advices? Which field could be used for that datatype?
I have found some implementation using nte segment but it is limited in characters.

Thank you

0 5
0 388

Hi All

I'm having a problem with cleaning user inputted text from a HealthCare system my HealthConnect system interfaces with.

The input can be anything posted into an RTF box on an app which stored in oracle, and extracted by HealthConnect from oracle via an XML based API.

When the XML is returned, various values are read out of it using %XML.XPATH.Document and it is the presence certain characters entered into the RTF fields cause XPATH to throw an error. For example,

0 4
0 638
Question
· Nov 12, 2023
SSL Certificate Error

Hello,

I have recently created a HA by "Cloning" the existing server. Everything worked fine until I have to failover the Primary in order to process. The Backup Failover member successfully promoted to the status of primary. Everything was working fine except on one of the Services, I receieved the following error message;

> ERROR #6156: No match between server name 'Test111b.domain.local' and SSL certificate values 'Test111a.domain.local'.

0 2
0 354

Hello,

I have a situation where Intersystems Cache (2018.1.8) terminal and studio sessions are fully functional, but the Management Portal is not accessible.

It is displaying the "HTTP 500 Internal Server Error" message. I have checked and my user account is Enabled and not disabled.

Thank you,

Farman

0 4
0 353

Hello everyone!
I need to build something that will receive a REST request. As of now I have tried my luck with using an EnsLib.HTTP.InboundAdapter. But i am not so sure how I am supposed to configure it to be able to receive the REST request together with the JSON body.
I have specified the OnProcessInput in the adapter so that it receives a GlobalCharacterStream. However, I have not had any good luck finding out to actually make the request to the EnsLib.HTTP.InboundAdapter.

0 8
0 408

Good morning,

Thank you for taking the time to read, understand, and answer this question.

If you needed to convert a message where questions are separated by "|", and the question text is the portion before the ":" and the response is the portion after the ":"; Which way would be the most readable and understandable for other developers?

Input example:

NAME OF SQUAD 1?:ALPHA|NAME OF SQUAD 2?:BRAVO|NAME OF SQUAD 2?:ANSWER THREE||NAME OF SQUAD 25?:YANKEE|NAME OF SQUAD 26?:ZULU

Output structure:

0 2
0 162

Hello!

I'm currently trying to setup a SFTP Ensemble production to handle all of my SFTP transactions. It's been going well, but I'm currently running into an issue where it is saying it is unable to exchange encryption keys. Error Below:

Unable to exchange encryption keys [80101005] at Session.cpp:238,0' matched ReplyCodeAction 1 : 'E=R' resulting in Action code R

Any advice on getting around this would be appreciated.

0 3
0 446
Question
· Aug 16, 2023
Web client from SOAP Service

I created a web service and used the Studio SOAP Wizard to generate a client from the WSDL file of the service. But the client is throwing the error as shown below

WebServiceClientClass '' could not be instantiated, or the WebServiceURL Location could not be determined

What have I missed?

Is there a better way to create a client?

0 2
0 293

We need to generate a PDF file from an HL7 message as it passes through an Ensemble production. Looking for examples, tutorials, documentation aligned to our scenario.

We are currently using Ensemble (so can't use InterSystems Reports at the moment). Thinking Zen reports...

We can get from HL7 to XML OK, following Introduction to InterSystems Health Connect - YouTube (see c.1:11:00-1:13:00)

1 2
0 183

Hi Community

I am using a standard DTL for Allergy Intolerance but it shows codes for Category and Severity Columns on cliinical viewer.

I have copied the standard DTL to my custom folder and I want to modify it to show descriptions for these two columns but I don't know how to do it.

Please see the below DTLs for Category and severity and advise how I can change them to get descriptions.

Category DTL section

0 5
0 170

Hi Community,

Please give me an example on how to configure email alerting based on the rules and send out emails accrordingly.

As a message comes into the business service component I want to check specific fields and if a field for example active = true i want to send it to a different email and if active = false I want to send it to a different email as well.

Guide me on how to accomplish this requirement and let me know if InterSystems uses a default SMTP server or I must have that server in place.

Regards

0 8
0 302

I have a pResponse output in my onrequest method, in here I build an ACK and set the pResponse variable to it, and return a status object afterwards.

The pResponse doesn't show up in the trace or message viewer, yet if I move the interface to another more established namespace it works fine, what settings or config could be preventing the ACKS going back?

0 4
0 217

what happened is, I selected a user to investigate their entries. I didn't enter a start date.

After hitting search, the query timed out, (or i cancelled it, I don't recall).

Now, when I go to that page, the browser processes and nothing is displayed.

I cleared my browser's cache, and I still get a blank page.

I'm running on Win10.

I use Chrome as my default browser. The problem also happens in Fire Fox.

i can log in as a different user and the page displays as expected.

How can I correct this situation?

Thanks!

0 4
0 291

In over a decade of using Ensemble/HealthShare, we have been able to use a single message type (doc type) for all HL7 ADT event types. We now have an application for which the HL7 segment sequence is different for A03s than it is for other ADT event types. The content of the segments is the same across event types; only the segment sequence differs. The data transformation has to do some custom logic, so we can't just use the "copy" variety of the transformation Create property.

0 3
0 393

Good morning:


Thank you very much for reading the doubt and above all thank you very much for answering.

Given the following use case:

If we have a Destination Service that through a HTTP GET by REST gives us a certain JSON response, where it should be noted that it is a list of objects where each object in the list does NOT have a key:

0 3
0 339

Hello everyone,

I am looking for a sort of REST interoperability adapter that can forward REST calls within HealthConnect. If necessary, we need to adjust the requests or responses.

For Fhir calls, we use the FHIR Interoperability Adapter. This works perfectly; a message comes in as HS.FHIRServer.Interop.Request, and a message HS.FHIRServer.Interop.Response goes out. I can make adjustments as needed to both the request and response. I am looking for the same functionality, but then for non-FHIR REST calls.

0 2
0 209