Hi

How do I run a CSP page from within VS Code.

Secondly I have installed an extension called "Live Server" which will run .html pages within VS Code. Have any of you made use of this extension and if so can you specify that .csp pages are html pages?

If I press F5 in VS Code (just as you would in Cache Studio) in order to view a csp page when I press F5 in vs code it tries to open

http://localhost:57772/csp/bootstrap/

without the csp page name

If I add the csp page name in the url it works. The question is how do I link the csp page to the url passed to the browser

Nigel

Hi all,

I am looking for a best practise approach for providing an ITI-41 based webservice to allow a subsystem to send a provide and register document set transaction via webservice route the request to a registry and loop back the response from the repository to the originating service. Since we need to use Ensemb le 2017.2 I am looking for a best practise to takle that reuirement. As for health connect I could prove a webservice wich supports the named IHE transaction and route it to the registry quite simple. Anyway how would you cope with this requirement under Ensemble?

Hi Guys,

I'm using a Modal Group but whenever I click outside it the Modal gets minimised, so How can I change the view so that whenever pops up the view get locked until I'm finished with my modal then click exit to endModal ?

thanks

Introduction

Hi Community,

This article is aimed at developers implementing DICOM productions, specifically for cases with third-party endpoints that cannot handle the DIMSE timeout themselves.

For DICOM applications, the DIMSE timeout is a maximum time to wait for the next DICOM request (-RQ) or a response to a request (-RSP), after an association has been established. Unlike the ARTIM (association establishment) and TXTIM (data transfer) timeouts, the DIMSE timeout lives at a higher level than individual PDUs, with the application-level request/response logic.

Hi,

Currently I am working on HL7 Ver 2.3. Just want to know what is the best container image for this version?

Thanks

Hi Guys,

I've the below tablePane and for some reason when it's populated always the last row is selected by default, I've many tablePanes defined the same way but none of them has the last row selected when populate, so not sure why this grid is doing this? 

I am still trying to track down orphaned messages and have noticed that when we have Business Rules that send to a Business Process that some times there is an orphaned message that is generated as result of that send. 

• So my question is, is there an issue with the way that we have setup our Business Processes as they are setup with a request class of Ens.Request, and a response class of Ens.Response when the message is truly an HL7 message?

• Shouldn't the request class and response class be EnsLib.HL7.Message?

Hello Community,

I am still pretty new to Ensemble, Cashé, or ObjectScript. My question is this how can I tell when a file was finished and read fully? Currently, I have an EnsLib.FilePassthroughService reads a file from a designated file path and moves it to an archive file path. I need to set up an alert or a notification that can tell me once the file has been read in its entirety and has been moved out of its current file path.

Any help you can give me would be greatly appreciated, or if you need further clarification I can do my best to answer any question you have. Thank you. 

Hi everyone.

I was wondering how people manage viewing messages that use a character encoding incompatible with the Management Portals use of UTF-8.

For example, a message that looks like this in Windows-1252/Latin1:

Will display as this under the message "Full Contents"

and this under the "Raw Contents"

*EDIT*

I tripped myself up early on, but this covers how I went wrong - https://www.i18nqa.com/debug/table-iso8859-1-vs-windows-1252.html

Good morning,

We would appreciate your support:

Developing an integration to perform a "Query / Retrieve" circuit with DICOM medical imaging studies, we would need the following:

Options of invocation of the DICOM TCP service that has been published for this integration, alternatives to the command line option.

Specifically we have read: Receive DICOM document with an embedded PDF and metadata.

Adapting the example, we use the line:

./storescu -b VNAPRE -c ESBPRE@10.136.4.XYZ:19ABC ./embeddedpdf.dcm

By which we simulate the sending of a DICOM document with a PDF.

Hi Team,

I am trying to call  Datetime in CUSTOM.Training.Functions class please refer the below line.

<assign value='##class(CUSTOM.Training.Functions).DateTime(source.{PIDgrpgrp().PIDgrp.PID:7.1})' property='target.{PID:7.1}' action='set' />

My Datetime method 

ClassMethod DateTime(DateTime As %Integer)
{
Set Year = msg.SetValueAt(,"PIDgrpgrp().PIDgrp.PID:7.1","set")
Q Year
}
 

But i am not able to get the value of date of birth into the Datetime method, Kindly help how to get data of date of birth value into the method.

Thanks in advance

I am using SQL Outbound adapter and inserting a HL 7 Message by executing a stored procedure and getting an error 

The reason i found is that segment delimiter is causing an issue and following is sample code 

Hi Guys,

Can I insert a new row and enforcing my own ID not the default id increment? 

 &sql(INSERT INTO Sample.Person 
    (ID,Name,SSN) 
    VALUES ('205','Swift,Jonathan','111-22-3333'))

 IF (SQLCODE = 0) {
     Write "New Person inserted with ID: ", %ROWID,!
 }
 else
 {WRITE !,"SQLCODE=",SQLCODE," ",%msg }

I tried this in samples and got the below error:  

SQLCODE=-111 INSERT of Default Only RowID Field 'ID' in table 'Sample.Person' not allowed
 

thanks

I'm trying to create a general business rule, not an HL7 message router. (This is because i want to return values from the rules and message routing rules don't appear to be able to return values.) But, I want the business rules to be able to look at HL7 messages; I've copied a simple when condition from an HL7 message router but the error log throws up <PROPERTY DOES NOT EXIST> ...... *HL7

Hi Guys,

is there an easy way to import MS Access database into ensemble? 

Thanks

Business services are powerful components that pull data in from external sources. In most cases, pre-built components do the job, but sometimes you need to code custom business services. There are a few best practices to keep in mind when doing this:

I have over 25+ years in Health Care integration and 10+ years experience with Ensemble interface development.

Rolling off my project soon and looking for my next contract.

Looking for long term projects where I can leverage my Ensemble and Epic Bridges experience

Hi Community,

Can I customize below Monitoring page and expose as webpage outside as webpage. 

http://localhost:52773/csp/sys/%25CSP.UI.Portal.EnsembleMonitor.zen

Please give the source code location of this webpage in studio?

Thanks,

Prashanth

Use case: small in-house hospital systems that query patient demographics via SQL.  The new PAS being implemented in the near future will only support query/response via HL7.  SQL access is available but intended for reporting so up to 24 hours behind.

Probably the easiest option is to set up a database in Ensemble and keep it up to date via standard ADT feed.  This is going to have quite a large footprint and has a risk of getting out of sync.

Found one interesting behaviour in one system with Ensemble. Some Request class has a property with type %XML.CharacterStream by design, this class is the heaviest request in the system, and with profiling journal files, it got about 40% of the file. When I counted all the sizes of such streams per one day and found that the real stored data is three times less. After deep inspecting the journal file, I found the first save of stream data, then removing previously stored data, and saving again and there were no reasons to change the content of the stream, it should be stored only once.

Hi,

In Visual trace there is EDI Response legend. What is the EDI Response and what is its use in production?

Thanks

I'm thinking to try ChunkedWriter based on the documentation I'm reading to solve an issue but could use some clarification. Anyone that could provide a usage example of this down below?

To send a chunked request, do the following:

Hi anyone has created the user roles for UCR pls share details like if we want to create following roles what access rights should be give to each role.

UCR Admin - This user can stop/start productions, can enable/disable services, can run sql queries, can make changes in facility registries, assigning authority and other configuration.

UCR Developer - This user can add new services in the production but can not make any change in the registires and other configuraiton

I have  a SQL query that I want to run against MS SQL from cache ensemble using the SQL outbound adapter. If I run this query direct from MS SQL Studio it take about 7 seconds MAX and returns about half a million rows. The row only contains one column it is a number all same size and if I run this query in the production in ensemble it takes for ever the production finishes without getting the response back. The same query run in cache outside the ensemble environment writing results to a file it returns results taking about 3minutes to complete. But if I load the results into  a list or

Hi,

Working on integrating with O365 Sharepoint REST API. I would want to know if anyone can share their experience with integration with Sharepoint REST API and how they implemented security?

Thanks
Kiran Kumar

Hello

I am trying to import a WSDL using the wizard and it outputs:

ERROR #6413: Element 'wsdl:binding:operation:msg': corresponding to message null : http://services.sanidad....

I have tried to find more information:

It is close to this case, however it is not the same error number:

Source: https://cedocs.intersystems.com/latest/csp/docbook/DocBook.UI.Page.cls?…

Here the error number does not give us much information:

Source: https://docs.intersystems.com/irislatest/csp/docbook/DocBook.UI.Page.cl…
 

I am experiencing a problem with an EDI process that uses a SQL Batch Service to connect to our DEV environment.  However, when we point the EDI service to our TEST server, it errors out.

I have checked every single property on our TEST and DEV servers as well as the properties on the associated tables.  They are identical.  Nothing has changed in the SQL either. 

Hi 

I am currently working with a "Stem Cell" supplier who do not have any/much Interface capability to push "Bone Marrow" harvest information. But willing to develop an HL7 feed/ WSDL capability.

It will be ideal, if I can get this via HL7 as much as possible and wondering if anyone has used HL7 to transmit bone marrow CD34, CD3 makers, product location and Harvest information? if so can you please advise which HL7 messages are ideal and some sample messages if possible please?

How about 

Hello community,

Hi, i am trying to transform a mensage HL7 ORUR01. The  segmnet OBX.5 is dynamic and i'm calling  to subtranform item but fail.

this is the error:
ERROR <Ens>ErrException: <METHOD DOES NOT EXIST>zTransform+16 ^es.gra.informes.transformaciones.OBXToInforme.1 *GetSegmentAt,EnsLib.HL7.Segment -- - registrado como '-'
número - @'
Set zSrcOBJz=source.GetSegmentAt("5",.tSC1)'