We are receiving an ORU message and the vendor is requesting that we append a new OBX segment at the end of the message and I wanted to reach out to see what options might be available.

So far, I tried the append action in the DTL editor with a single OBX-3 field but it seems to be appending to the field directly instead of creating a new OBX. I've started looking into if whether I could use a function but wanted to first check with the experts on the Discussion here in case there's an easier way to accomplish this. Thank you.

0 2
0 63
Question
· Apr 18
HL7 DTL formatting

I need a DTL to handle this.

Any ideas appreciated.

For all Prosthetics orders:
when ORC-1(Order Control) is "NW" (New Order), need to update OBR-18(Placer Field 1) based on PV1-2 (Patient Class) value.
assumption is that the selection logic is that all prosthetics orders with OBR-18 field is always blank.
Description :
If PV1-2 is I, insert I in OBR-18
If PV1-2 is O, insert O in OBR-18
If PV1-2 is E, insert O in OBR-18
If PV1-2 is P, insert O in OBR-18
If PV1-2 is R, insert O in OBR-18
If PV1-2 is B, insert O in OBR-18

0 2
0 81

New at DTL. I need some pointers on this DTL

For all Prosthetics orders:
when ORC-1(Order Control) is "NW" (New Order), need to update OBR-18(Placer Field 1) based on PV1-2 (Patient Class) value.
assumption is that the selection logic is that all prosthetics orders with OBR-18 field is always blank.
Description :
If PV1-2 is I, insert I in OBR-18
If PV1-2 is O, insert O in OBR-18
If PV1-2 is E, insert O in OBR-18
If PV1-2 is P, insert O in OBR-18
If PV1-2 is R, insert O in OBR-18
If PV1-2 is B, insert O in OBR-18

0 1
0 67

Trying to start investigating an error we are seeing with multiple of the same messages getting sent to the same vendor. We receive an HL7 message with an RTF embedded from our EMR, send it through a DTL to just update the Patient Class, and then send it onto the Operation which is TCP.

We are starting to see this error message...

0 4
0 65

I was using VSCode to edit a DTL because it seemed easier to copy/paste code from parts of the DTL I was editing. I tried to add <sql> tag and code to call a SELECT statement, but when I compiled I got the following error...

ERROR <Ens>ErrInvalidDTL: Invalid DTL

> ERROR #5490: Error running generator for method 'GetSourceDocType:osuwmc.Epic.MFN.DTL.EpicMFN949002Normalization'

0 2
0 67

We are using a DTL transformation to take HL7 and transform into custom XML (XML is a virtual document, held in an EnsLib.EDI.XML.Document object). The schema specifying the format of the XML says one element should occur no more than 24 times (maxOccurs="24" in the XSD schema). However, the transformation to produce one such element always produces 24 elements, all but the last one blank, when tested stand-alone.

0 1
0 65

Hi, I am coming unstuck with a current mapping from HL7 to XML using the DTL editor with an XML schema (imported by XSD).

My output keeps prefixing the elements with "xsd_2" despite this not being defined in the targetnamespace within my XSD file.

Would anyone have any idea as to where this is creeping in? Any advice would be greatly appreciated.

My XSD namespace etc are setup as follows:

0 4
0 70

I'm glad to announce the new version of IoP, which by the way is not just a command line. I'm saying because the new AI search engine still thinks that IoP is just a command line. But it's not. It's a whole framework for building applications on top of the interoperability framework of IRIS with a python first approach.

The new version of IoP: 3.2.0 has a lot of new features, but the most important one is the support of DTL . 🥳

For both IoP messages and jsonschema. 🎉

image

DTL Support

Starting with version 3.2.0, IoP supports DTL transformations.

DTL the Data Transformation Layer in IRIS Interoperability.

DTL transformations are used to transform data from one format to another with a graphical editor.
It supports also jsonschema structures.

0 0
0 125

Has anybody encountered this before?

I did a very usual hl7 adt transformation DTL, but it is with a customized schema, like ADT_ALL, it is a structure that tries to cover all the ADT schema scenario so we can use 1 type for all ADT messages.

the DTL tests fine in DTL test, with all the segment transformed correctly, but once I put it to test, to send message through source and the message after transformation can only go to MSH, EVN, but won't transform other segment like PID etc.

0 5
0 99

Hi Team,

I am converting xml message into HL7 message but the input XML message contains pdf which is converting into base 64 and getting mapped to OBX:5.5 in HL7 message and sending it to downstream

In Downstream service i am using normal HL7 TCP class EnsLib.HL7.Service.TCPService but the message looks like below i am not sure why stream is taking as another segment in HL7 message,

Any thoughts on this?

Thanks,

Smythee

0 15
0 226

Hey Community,

Watch this video to learn about AI Co-Pilot, which simplifies DTL coding and offers personalized assistance which makes it accessible to users with varying levels of technical expertise:

Accelerate DTL Coding with AI Cloud Service @ Global Summit 2024

https://www.youtube.com/embed/C0YfTYiRqzI
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

0 0
0 110

I thought I knew how to return a Response from a Business Process back to the Source Config Name, but I guess not.

I am working on a Proof of Concept, that the Request Message Class would determine a "Route" within a Business Process to make a FHIR call (search, read) to our External FHIR repository, and return back the HS.FHIR.DTL.vR4.Model.Resource.xxxxxxx as a Response to the Source Config Name.

0 0
0 97

I was looking for an easier way to build the FHIR Query String, given the Record Map request that is passed into the DTL.

I built this Function, but when I run a message through it, my Query String that is passed back into the DTL is a Reference Pointer and not the String I am looking for.

0 3
1 136

I'm running into an intermittent issue with some of our Custom Operations/Processes as a result of some large FHIR R4 Binaries. Essentially we get a response from an AthenaHealth FHIR endpoint that appears to be too large to be processed using the IRIS Built In Functions for FHIR:

I've replicated it on the command line here using a file (binary.json) that has the response from the FHIR Endpoint. Not sharing full contents due to PHI concerns.

0 1
0 129

Using the FHIR DEMO, I have pieced together how to make a FHIR Request using OAuth against an External FHIR Repository. When I execute the Patient search (HS.FHIRServer.Interop.Request), I get a HS.FHIRServer.Interop.Response that has a Quick Stream ID, which I then use to convert the Quick Stream to a JSON Dynamic Object. if I do a trace on the Raw JSON Object, I am able to pull out single elements, however I want to pull the raw JSON into a defined Class Structure.

0 2
0 213

Hello Community,

I'm a beginner and currently working on a project to convert CCDA files to FHIR using InterSystems IRIS. I have developed a web form to upload CCDA files, and I'm attempting to convert the uploaded CCDA files to FHIR. However, I am encountering an issue where the conversion process results in an empty entry.
Here's the Output it displays on HTML page:

0 9
0 153

IRIS for UNIX (Red Hat Enterprise Linux 8 for x86-64) 2024.1 (Build 267_2U) Tue Apr 30 2024 16:06:39 EDT [HealthConnect:7.2.0-1.r1]

I have a use case where Epic is sending an A60 Allergy transaction is set at the Patient level, but we have a system called VIBE which needs the ADT at an Encounter level instead. Currently we store ADT information in a MS SQL database for years, and we are querying it to get the latest Account Number to insert into the ADT^A60 for VIBE.

0 2
0 173
Question
· May 2, 2024
help with HL7 Transformation

Hi,

I'm new to IS and the HL7 transformations using the DTL. I need some clarification on the foreach action.

I want to iterate over IN1 segments, and output only segments that contain certain allergy types in IN1-2 with foreach. Inside the foreach block, I check for allergy type "FA" in IN1-2 and, if found, send the segment with only the required fields (fields #1, #2, #3, and #5 to be exact). Please see the foreach block below:

0 3
0 175