Hi,

I have a ORU message, which has a EVN segment that I want to remove and send the message across.

I tried to clone the request as below:

s newreq = request.constructClone

s changreq = newreq.RemoveSegmentAt("EVN")

Set request  = changereq

but it fails. Is there a way that I can safely remove a segment and pass it on?

Would appreciate your help in this

Regards,

Eric

We are trying to create a simple class extending %RegisteredObject that could be used as a singleton. However we are not able to store it in a global to later be retrieved (by the same process but elsewhere in the code).

I resumed my issue in this small code sample : 

ClassMethod RunMe()
{
   // Create a simple %RegisteredObject
   set obj = ##class(%ZEN.proxyObject).%New()
   set obj.MyProp = 22
   do ##class(%SYSTEM.OBJ).Dump(obj)
   
   // Store it in a global
   set ^MyGlobalName = obj
   write "Stored : " _ obj,!!
      
   // Retrieve it from the global
   #Dim obj2 As %ZEN.proxyObject = ^MyGlobalNam

InterSystems has also released IRIS as containerized deployments. This post is to demonstrate how InterSystems IRIS and applications those rely on IRIS a backend can be packaged into an image and be run in other machines in containers and how simple it is to do that.

A container runs image/s which have all the necessary executables, binary code, libraries, and configuration files. And the images can be moved from one machine to another, and  an images repository like Docker Hub can simplify that process.

I have used an application from Open Exchange for this demo.

Demo video: https://www.lo

Hi guys,

In Cache CSP application, I have enabled Password expiration days to certain days in System > Security Management > System-wide Security Parameters. When password expires for the users and they try to login the login page takes to standard cache password change page. 

Is there anyway I can display my overridden page instead of standard cache password change page? 

Reason to display my own page:  I needed to break down the UserName, for eg: UserName into CompanyID - IBA and User ID - san.

Currently, I have overridden %CSP.PasswordChange class to CSS.CSP.ChangePassword.cls and inc

Hi community,

I am trying to map <assign value='source.{ORCgrp(1).RXE:7.1}' property='target.{ORCgrp(1).RXE:7.1}' action='set' /> in data transformation 

My input value for source RXE isRXE:7.1 will be like Keep orders~New orders  ~       ~ new orders

 After mapping i am getting only First repetition  value i,e is only Keep orders value  

I have tried using $EXTRACT like this <assign value='$EXTRACT(source.{ORCgrp(1).RXE:7.1},1,*)' property='target.{ORCgrp(1).RXE:7.1}' action='set' /> in data transformation  still getting First repetition value in target message

How to get full 7.1 se

The JSON is a data document free of types and validation rules. However, in some scenarios it is important that the JSON document has type and business rules validation, especially in interoperability scenarios. This article demonstrates how you can leverage a market-defined JSONSchema technology that is open for everyone to use and do advanced validations.

About JSON

According to json.org, “JSON (JavaScript Object Notation) is a lightweight data-interchange format. It is easy for humans to read and write. It is easy for machines to parse and generate. It is based on a subset of the JavaScri

A bit of an old school CSP question.  <csp:search> is a really nice, quick way to make easy lookups for CSP pages, especially for back office stuff that doesn't need to look pretty for the modern web app user.

At any rate, I'm here at the moment:

<csp:search SHOWSQL=1 NAME="OrgSearch" SELECT="OrganizationName Organization Name,Abbreviation,Software->Abbreviation Software" WHERE="OrganizationName Organization Name,Abbreviation,Software->Abbreviation Software" STARTVALUES=",,Software" PREDICATES="%startswith,%startswith,%startswith" CLASSNAME="AppLibrary.Organization" OPTIONS="popup" ONSELECT=

Welcome dear members of the Community to the presentation and first article of a small project that will demonstrate the capabilities of InterSystems IRIS to provide full backup functionality for a web application developed in Angular. This article will be limited to presenting the concept as well as the InterSystems IRIS functionalities used in a general way, going into more detail in subsequent articles.

Welcome to QuinielaML!

Introduction

It is possible that you have already heard about InterSystems IRIS functionalities such as Embedded Python and IntegratedML, but surely you have not

Hey Community,

Watch this video to learn about the latest developments in client connectivity across Java, .NET, JavaScript, and Python:

⏯ Language Connectivity: New & Next @ Global Summit 2023

InterSystems FAQ rubric

It can be obtained using AllFields query of %SYS.ProcessQuery class.

For the details, please refer to the document Process (Job)【IRIS】／Process (Job).

An example of execution in the terminal is as follows.

USER>set stmt=##class(%SQL.Statement).%New()
USER>set st=stmt.%PrepareClassQuery("%SYS.ProcessQuery","AllFields")
USER>write st   // you can call %Execute() when st = 11
USER>set rset=stmt.%Execute()
USER>while rset.%Next() { write rset.%Get("JobNumber"),"-",rset.%Get("Pid"),"-",rset.%Get("OSUserName"),"-",rset.%Get("CurrentDevice"),"-",rset.%Get("Routine"),"

Hello,

First of all thanks for reading this question, and thanks for your time, trying to help us.

We would need to find a value inside the first element of a list, which is a property inside a Request Message.

The Message is:

Class Mensajes.Request.Farmacia.Seflogic.InformarSalidasOBMIRequest Extends Ens.Request
{

Parameter RESPONSECLASSNAME = "Mensajes.Response.Farmacia.Seflogic.SincronizacionConsumoResponse";Property IBLDAT As%String(MAXLEN = "");Property IBUDAT As%String(MAXLEN = "");Property IBWART As%String(MAXLEN = "");Property ILOTEAUTO As%String(MAXLEN = ""

Summary

A Quick start to include InterSystems IRIS Tables in Data Build Tool using Python.

It uses the sqlalchemy plugin with sqlalchemy-iris which enables the iris strategy for duckdb as a source for a dbt project.

EDIT: If you stumbled here on Google Geuse for "iris dbt", your best bet is to checkout dbt-iris for the native adapter implementation that follows dbt guidelines.

Im out of town for the Python meetup in Cambridge, but will submit to the InterSystems Python Programming Contest starting in September. Sucks I will miss it, wanted to connect with Thomas Dyer and see how close I got,

Hello everybody. I have a problem a little bit strange. The thing is that there is a Task on Cache that by default is executed everyday at 4:00:00 that, with my settings, will delete all the Audit logs with more than 70 days of existence. The problem is that everyday this task is executed without an error message (status "Success" after the task is finished) but no data is cleaned, the same if I executed this particular task on the "Task Schedule" screen. I'll put here a screenshot of the message after executing the task on the "Task Schedule":

I've checked for several things on Caché Manag

Hi Developers!

We’re happy to invite you to the contest dedicated to your bright ideas related to InterSystems technology:

🎁 The 2nd InterSystems Idea-A-Thon 🎁

Post an idea according to the topic of this Idea-A-Thon between August 01 and August 21 and receive a guaranteed prize.

Both InterSystems employees and Community Members are invited to participate!

>> SUBMIT YOUR IDEA HERE <<

Has anyone firstly got VIP working for mirroring in Azure?  We are pretty sure that this won't work but I wanted to verify it.

Has anyone used the Azure Load balancer to act as a Virtual IP and if so was a application gateway required.

Interested to know your experiences in getting this working.

Hello!

I'm currently trying to setup a SFTP Ensemble production to handle all of my SFTP transactions. It's been going well, but I'm currently running into an issue where it is saying it is unable to exchange encryption keys. Error Below:

Unable to exchange encryption keys [80101005] at Session.cpp:238,0' matched ReplyCodeAction 1 : 'E=R' resulting in Action code R

Any advice on getting around this would be appreciated.

Hi,

We're using a database gateway from IRIS to Oracle using ODBC. It has been occurring a character set issue that invalidate special characters. 

Oracle support has found data type missmatch in ODBC debug while transfering data between the databases. 

ODBC was download from official website.

Is there any Intersystems contact to send it to check whether there is a ODBC issue? I hasn't found any directy contact in Intersystems in website. 

Hi,

I don't found how to get params send by a GET REST query (not in url but by request param).

this is config of the call in postman

I try to get %request.Data, doesn't work : Data is undefined

I try to get %request.GetCgiEnv("Data"), doesn't work, return ""

I do ZW %request and see that my parameter is present in cgi parameters, but I don't now how to access it.

Why I'm not getting OS level environmental variable in the IRIS for below actions:

CentOS termial:

[root@]# export TEST="test"
[root@]# echo $TEST
test
[root@]# iris session MYIRIS

Node: myiris01, Instance: MYIRIS

Username: User
Password: ********
NSPACE>s test = $SYSTEM.Util.GetEnviron("TEST")

NSPACE>w test

NSPACE>

Do you want to develop, analyze, or deploy? See how to filter online learning content according to task you want to perform in the August 2023 Learning newsletter. Ready to go deeper? Find details about a new Health Connect program, live classroom courses, and the HL7 Interface Specialist certification exam. 

When you find yourself in need or desire of learning something new in technology and you face the challenge of embarking on a new venture, what is the appropriate starting point? How do you decide where to begin and how to gradually approach the process, especially when the challenge seems overwhelming?
 

Myself I read official documentation or try to start with something I know and then learn something new very related.

As an example of an application on Java working with Hibernate dialect for IRIS, wanted to use RealWorld application, and found realization for Quarkus. RealWorld application is an example of an application close to some real one, with already prepared tests for the backend. Most of the examples of realizations can be found here

The RealWorld example application is often referred to as the "Wikipedia for building full-stack applications." It serves as a standardized prototype that developers can use to create applications using various programming languages and frameworks. The application provides a real-world use case by mimicking a blogging platform, complete with features like user authentication, profile management, article posting, and comments. With a comprehensive set of specifications, including ready-made backend API documentation and frontend designs, it allows developers to see how the same functional requirements are implemented across different technology stacks. The RealWorld example is widely used as a learning tool and a benchmark for comparing various technologies.

Quarkus

Quarkus is an open-source, Kubernetes-native Java framework tailored for the GraalVM and HotSpot. Created with the aim to enhance the modern cloud-native environment, it significantly reduces the footprint and startup time of Java applications. Quarkus is known for its "container-first" philosophy, allowing developers to build lightweight, high-performing applications with a focus on microservices architecture. This flexibility has made it a popular choice for organizations looking to transition into serverless or cloud-based platforms, combining both imperative and reactive programming models. Whether it's a traditional web application or a complex system of microservices, Quarkus provides a robust platform for building scalable and maintainable software.

Hi,
For a REST application, when a user connects, I have to write a message in an application log.
The login is processed by the /login routine by default.

How can I add a process to the login process?
Is there a callback ?
Should I create a login method in my class that extends %CSP.REST ?
I'm not sure and can't find information in the documentation ?

I try this (not working) :

<Routes>

<Route Url="/lists" Method="GET" Call="GetLists" />

<Route Url="/me" Method="GET" Call="GetUserInformations" />

<Route Url="/changePassword" Method="PATCH" Call="ChangeUserPassword" />

<Route Url="/utilisate

Hey Developers,

You may have already seen the article about creating a post on the Developer Community where you can find general info about creating posts. Still, we've decided that adding a post that focuses solely on the questions can be beneficial. So let's concentrate on how to pose questions.

First of all, let's talk about giving a post a good title. Choosing a good title for a question is essential to attract the right audience and increase the likelihood of getting helpful answers. Here are some tips to help you craft an effective title:

I have a webpage in CSP in which there is a link to download files (files are located in specific folder). When the user clicks on the link , it has to download the file into their local machine. Attached code for both upload and download the file from server, upload is working and download is printing the file in webpage rather than downloading it. Appreciate your help.

Upload (Working fine): 

set dir="/usr/bin/local/myfiles/
    Set mimeData = %request.GetMimeData("file")
    Set fileType = mimeData.Attributes("ContentType")
    Set docType=$Select(fileType="image/jpeg":"jpg",fileTy

I created a web service and used the Studio SOAP Wizard to generate a client from the WSDL file of the service. But the client is throwing the error as shown below

 WebServiceClientClass '' could not be instantiated, or the WebServiceURL Location could not be determined

What have I missed?

Is there a better way to create a client?

Hi Developers,

Watch this video to learn about new features of IntegratedML, such as support for larger datasets and new syntax for time series forecasting:

⏯ IntegratedML: New & Next @ Global Summit 2023

Hello guys,

I want to move a development IRIS for Health database to another server. I will do this manually for specific reasons. If I simply copy the /mgr folder along with all the files (.DAT, .GBK, etc.) and configure it in the new server, will it work?
Best regards.

Hello!

I'm new to Caché systems and I have a question...

I need to develop a custom task that daily exports the result of a query to a csv file in the database directory (I use the UNIX version).

Does anyone have any code or help to solve this case?

Thanks!!!

Hello, 

I have a .NET based web application and would like to front end it with an Iris4Health server, ie possible using the CSP or web application url's to reoute to the requests into the docker container. Kinda of like a reverse proxy but using Iris for health. Is the external language server a good use for this or is that only for direct interaction with I4H? 

I know you can create a custom container with the app copied into it, but not sure if that is the best way.

Any suggestions on how I could accomplish this would be appreciated.