Hey everyone, I am implementing version control with git-source-control on our codebase and I ran into a pretty strange issue. I believe I have the set up (mostly) correct as the behavior with .cls files is exactly as expected. However, I noticed that git is not keeping track of any changes to CSP files.

Specifically, if a new CSP file is created and saved, I will get the following output:

exporting new version of /csp/testdb/wrc.csp to C:\InterSystems\IRIS\mgr\repo\TESTDB\csp\testdb\wrc.csp

1 8
1 177

Hey Community,

Enjoy the new video on InterSystems Developers YouTube:

SMART on FHIR: Introduction & FHIR Server Setup

https://www.youtube.com/embed/OHaZ5qiyQ1c
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

1 1
0 72

My HL7 message got "AR" (rejected ack code) and went to the suspended queue. I re-submitted it (without editing it) but forgot to write down the details before doing so. It got "AA" and everything works fine from there.

Now (the next day) I want to check with the downstream system why they returned "AR" initially. Is there a way to search for the original message the got an "AR", along with any returned error message please?

Thanks

W

1 3
0 35

Hi Community

I'm working on a complex piece of rules that needs to check each OBX and evaluate if 3 of the fields match certain criteria. I've tried to achieve this using a Foreach loop, which does work, however it is not as clean as I wanted it. I was hoping I could assign temp variables inside the foreach loop to make the rules more easier to read, for example @testCode @resultText. This is not support as you can only assign inside a when condition. Before I raise this as an idea, i wondered if there was an alternative way to achieve the same thing?

1 1
0 18

Currently we are exploring how we can allocate additional disk space to our current environment as we have seen a significant increase in growth of our Database files. Currently we have 3 namespaces, all with 1 IRIS.dat each that contains both the Global and Routines.

Since we have started down the route of everything within a single IRIS.dat file for each namespace, is it logical as we see growth to be able to split the current IRIS.dat for each namespace into a separate IRIS.dat for global and a IRIS.dat with for routines for each namespace in a Mirror environment?

1 4
0 216

What settings do I need to just passthrough an X12 messages from a BS to BO and out the BO without modifying the message?

Currently, we are receiving the X12 messages but, it seems Iris is modifying it by "hiding" some segments like the ISA segment. The message goes out the BO modified and it doesn't reach its destination. Since I just want to pass it through, there is no BP, DTL, or Rule processing the message. Message is received by the BS and sent directly to the BO.

My current settings:

1 7
0 124

I have a segment within a Group (grp) that needs to be validated that it is populated within the message.

When you use a Foreach within a Business Rule how should you account for the counter in the group?

For example, Epic sends their MFN message in the following format.

MSH~MFI~[~{~MFE~STF~PRA~[~ZPR~]~[~ZLK~]~[~CER~]~[~ZMG~]~[~ZTF~]~[~ZGP~]~[~ZDD~]~}~]

1 1
0 60

I am receiving a FHIR response bundle back with a resource of patient. Using fromDao, I attempted to take the stream and put it into FHIRModel.R4.Patient but it is not mapping correctly. When I attempt to take FHIRModel.R4.Patient and write it out using toString(), all I am seeing is the resource

{"resourceType":"Patient"}

so the response is not mapping correctly to FHIRModel.R4.Patient. How have others handled this? Do I need to translate it to an SDA since it does fit the model format?

1 6
0 39

I am trying to login to InterSystems image repository but it is not recognizing following credentials from ubuntu.

docker login https://containers.intersystems.com -u <username> -p <password>
WARNING! Using --password via the CLI is insecure. Use --password-stdin.
Error response from daemon: Get "https://containers.intersystems.com/v2/": unknown: Bad credentials

The same credentials works via website.

0 2
0 137

I am trying to use IRIS for Health as a Facade for an external FHIR Server, where IRIS provides the proper authentication.
The client authenticates using a bearer token obtained from the IRIS OAuth2 server via a jwt client assertion.
The IRIS endpoint, however, returns a 401 as soon as I remove the Unauthenticated access

Is there w way to make this work through configuration?

0 1
0 84
Question
· Oct 2, 2024
Python.net Install

This is for IRIS For Health 2024.2.0

We are migrating away from the .NET Gateway and trying to use the python integration instead.

I followed the instructions to install IRIS

Then I installed python following the IRIS documentation indicating that python should be installed globally.

I set up the PythonRuntimeLibrary and PythonRuntimeLibraryVersion options under System->Configuration->Advanced memory settings and when I run the shell function, I get python:

0 0
0 199

Hi All,

I'm trying to connect to an IRIS instance using VSCode, the problem is, there are 2 IRIS instances installed on this server, published by the same hostname using https (port 443) under 2 different subfolders (e.g., iris.demo.com/base & iris.demo.com/test).

When connecting via studio, I was able to connect by using the hostname (e.g., iris.demo.com) and specifying the super server port, while when connecting through VSCode, when specifying the web server port 443, the connection is always defaulted to one of the instance.

0 2
1 159

If both fields are numeric and the result of subtraction of field1-field2 is positive, only then put the result is a data field.

I am doing this within an Iris DTL.

I don't find any functions like IsNumeric(). Once I get that, I can test if field1>0 and field2>0, do the subtraction, and test if diff>0.

I just need a function to determine if they are numeric, rather than some cumbersome way like a regex where the only characters are 0-9.

I see functions in documentation but don't see them used at tests, only in WRITE statements.

Thanks,

0 10
0 160
Question
· Nov 15, 2024
DICOM Extended Negotiation

Is there a way to create and establish DICOM Association with Extended Negotiation?

I have implemented DICOM Query/Retrieve C-FIND, using EnsLib.DICOM.Operation.TCP and EnsLib.DICOM.Process base classes. My application, acting as an SCU, needs to query by Study Date-Time (combined date-time matching) range with timezone query adjustment. For this, I need to use Extended Negotiation.

0 0
0 74

I inherited some legacy MUMPS / ObjectScript code. A code review identified an exclusive NEW and that is not allowed per our coding standards.

The original code contains:

RUN(CALL,DRVNAME)
S $EC=""
S ^TMP($J,"RMPV","DRVNAME")=DRVNAME
N TMPFILE,OLDIO
S OLDIO=$IO
I $G(^TMP("RMPV","SILENT"),1) S IOP="NULL",%ZIS=0 D ^%ZIS I '$G(POP,1) U IO
D INIT^@DRVNAME
D ; scope variables
.N (DUZ,CALL) ; Protect %response
.S IOF="""""",IOM=80,U="^"
.D @CALL
U OLDIO
Q

0 3
0 102

I have two instances of IRIS, one is Production and another one is Staging (both managed by Docker) and I want to set up a full daily recover of the Staging server from a full backup of the Production server. I know how to do this manually using the DBREST utility, as well as how to make a copy of the database by making a full copy of the durable directory (however this option requires a full stop of the Production-database). What is the best way to automatically restore all databases from a full backup using scripting?

0 1
0 52

Trying to start investigating an error we are seeing with multiple of the same messages getting sent to the same vendor. We receive an HL7 message with an RTF embedded from our EMR, send it through a DTL to just update the Patient Class, and then send it onto the Operation which is TCP.

We are starting to see this error message...

0 4
0 65

Hello,

Our software commonly returns a full result set to the client and we use the DataTables plugin to display table data. This has worked well, but at datasets grow larger, we are trying to move some of these requests server-side so the server handles the bulk of the work rather than the client. This has had me scratching my head in so many ways.

I'm hoping I can get a mix of general best practice advice but also maybe some IRIS specific ideas.

Some background

0 6
0 103

Hi,

We're having an issue with some messages being sent to a downstream system from Healthshare. Part of the free text in the NTE segment is displaying with special characters on the system front-end but is not present in the HL7 message that we send to them. We are guessing that this is a result of some of the text being copied and pasted from something like MS Word. The '?' on their system is just representing an invalid character.

Is anyone aware of a way to prevent this occurring? We are sending the messages using the 'cp1252' encoding.

0 2
1 59