#InterSystems IRIS for Health

Good morning everyone,
In the facility we're working in, we have two separate installations for testing and production. In the test environment, we have production processes running properly, and we need to replicate production processes and settings in the production environment. Until now, when we move from a test environment to a production environment, we currently export the test classes, import them into production, and manually configure the production environment by connecting Services, Processes, and Operations and configuring the settings.

Hi,

To add or get information about a user for the management portal you can [within the portal]:
 System Administration > Security Management > Users 

Is it possible to:

1. List a user, user's properties including roles

2. Add a user and set user's properties including roles

3. Set a user's password

for the management portal using a program eg. Objectscript and/or SQL?
If so, how can this be done?
It would be great if you have examples.

Dear InterSystems-Maintainer Team,

I am currently conducting a comparative evaluation of FHIR clients as part of my
bachelor thesis in health informatics. One of my evaluation criteria is the response
time to support inquiries.

Therefore, I would like to kindly ask the following question as part of my analysis:
How can I read and write custom FHIR extensions using your client library?

If available, could you point me to any documentation or examples?

Many thanks for your time and support!

Kind regards,
Rüya Gökoglu

I need to implement a retry policy for an incoming message queue containing thousands of relatively small messages.

Successfully processed messages should be immediately removed from the queue.

If an error occurs while processing a message, the message should be sent back at the end of the queue, and the pause before re-processing this message should increase geometrically (1-2-4-8-16 seconds, and so on). In languages that support the async/await pattern, I'd simply create a delayed timer that triggers a fire-and-forget task. This would prevent blocking the main thread.

Hi,

I have a mirrored database called ROUTER.

I have a primary server T1 and a "Disaster Recovery" server T2.

When I activate ROUTER database on T2, I get the error it says the "Database could not be mounted".

I went to the audit database and it shows "Attempt to access a protected database".

T2 in mirror monintor shows "Connected" "Caught up" "Warning! Some databases need attention"

T2 show the ROUTER database as being "Mounted/R"
Both T1 & T2 are Linux servers. The ROUTER database file IRIS.DAT have the same Linux permissions

All productions on T1/T2 are not running.

Hello Community!

We have this json payload for an api request we are making.
 

{

    "fromDirectAddress" : "john@meda.com",

    "toDirectAddress" : "smith@domain.com

Hello everyone,

I'm using EnsLib.TCP.TextLineOutboundAdapter to communicate with a third-party system over TCP/IP. The issue is that the system sends back only an integer (e.g. 1001 or -1) without any terminator (like $c(10)).

The adapter expects a terminator and always times out with ErrTCPTerminatedReadTimeoutExpired, even though the correct data is received. Here an example of an error: 
[TCPSender] Errore nell'invio: ERROR <Ens>ErrTCPTerminatedReadTimeoutExpired: TCP Read timeout (15) expired waiting for terminator 0, data received ='1005'

Trying different terminators (e.g.

Hello Community

The InterSystems IRIS Community License for Iris version 2024.1 is about to expire. I would like to know if there’s a way to extend this license, or if I need to upgrade to the latest version of Iris.

Thanks!

As foreign tables are behind a paywall (booo); we have a external cache system using the intersystems ODBC driver or usually a .jar CacheDB.jar. 

The requirement is :

"Create a copy of the external table once a day to perform comparisons to detect changes"

We could go full code and this is what we will do but trying the following should ideally work 

CREATETABLEAS

This resulted in 

[SQLCODE: <-

Hello,

I need to expose InterSystems HealthInsight dashboards over the internet to external operators. The authentication flow is managed externally. When a user is authenticated, our system receives an HTTP request with specific headers (e.g., operator’s fiscal code and hospital identifier) that we need to extract in order to:

• Authorize the user to access the dashboards.
• Apply row-level security on the dashboards, filtering the data by hospital and user role.

Hi,

We have just upgraded the Trusts test Health Connect instance from 2021.1 to 2025.1 and now the the Rules and DTL editors, in the Management Portal, timeout after 10 - 20 minutes of inactivity.
In 2021.1 we were able to disable this timeout using: set ^EnsPortal("DisableInactivityTimeout","Portal") = 1, however this no longer works with 2025.1, and is being ignored.
It may be being ignoring this global setting because the editors are no longer using the default Web Application for the Namespaces, and are using the: /ui/interop/rule-editor and /ui/interop/dtl-editor Web Applications.

I am making a FHIR request against Epic, in when I get the Response back using "fromDao" I am extracting the stream into HS.FHIRModel.R4.Patient. However, the patient's name comes back as name within a list that references HS.FHIRModel.R4.SeqOfHumanName.

• How do I extract the name from HS.FHIRModel.R4.SeqOfHumanName?
• Do I have to then do another "fromDao" to pull the list into string format?
• How do I navigate around the lists that are in a FHIRModel response, to extract the string values?

Hello my friends,

I have a problem with Objectscript, why the value of address become like this ?

everything works fine except the Address,

this is my code, do I need something to make this into real address ? should I put something in my code ? 

 set paper=obj.PAADMPAPMIDR.PAPMIPAPERDR

            if '$isobject(paper) continue

            set Address=paper.PAPERStName

thank you for your help

Best Regards,

Steven Henry

Is there a way to change the background color of webterminal at the server side?

Maybe some *.class or *.css file on the Iris server?

I would like to have different colours on differents environments (test,pre,pro)

Thanks

Hello community,
Is there any built in class method to get the HTTP request and response message format from the %request and %response object. Similar to how a Web Gateway's HTTP Trace Facility captures HTTP messages.

Thanks!

I'm trying to gather more data for one of my namespaces so I can do some analysis. However when I run .BuildIndex() nothing populates in the resulting SQL table. I've tried deleting the class and reimporting and compiling and still nothing. I feel like I'm doing something OBVIOUS that's wrong but I can't quite figure out what it is. Here's what I'm doing (Customer name redacted)
 

ClassExtendsParameter4000000

Hello Community,

I got below error while connecting the IRIS studio. However, executes Write ##class(%File).DirectoryExists("c:\intersystems\irishealthcomm\mgr\hscustom")returns true and terminal and SMP works

thanks!

I am receiving a FHIR response bundle back with a resource of patient. Using fromDao, I attempted to take the stream and put it into FHIRModel.R4.Patient but it is not mapping correctly. When I attempt to take FHIRModel.R4.Patient and write it out using toString(), all I am seeing is the resource

{"resourceType":"Patient"}

so the response is not mapping correctly to FHIRModel.R4.Patient. How have others handled this? Do I need to translate it to an SDA since it does fit the model format?

I am trying to get the value of a Submit button on a CSP object page.

<input type="Submit" value="Assign" name="action" id="action">

I tried getting it thru $GET(%Request.Data("action")), but it throws an Undefined error. Isnt $GET supposed to handle it if its undefined anyway?

How do I get the "value" of the button pushed when the form is set to POST?

I have built a REST operation to submit a JSON Request Body, and in the JSON Response Object, I need to pull out certain values like pureID, portalURL, and under the identifiers array the ClassifiedID that has a term."en_US" = "Scopus Author ID"

{
    "count"1

My REST Operation looks like...

Method PostSearchPerson(pRequest 

But when I execute I am getting...

Hi Community

I'm working on a complex piece of rules that needs to check each OBX and evaluate if 3 of the fields match certain criteria. I've tried to achieve this using a Foreach loop, which does work, however it is not as clean as I wanted it. I was hoping I could assign temp variables inside the foreach loop to make the rules more easier to read, for example @testCode @resultText. This is not support as you can only assign inside a when condition. Before I raise this as an idea, i wondered if there was an alternative way to achieve the same thing?

I seem to remember making this work before, but I'm not having any luck digging up examples.

I've defined some custom properties for a business operation that could definitely benefit from having popup descriptions available in the Production Configuration. I have triple-slash comments before each property that do just that in the source. I thought those provided the text for the popup descriptions when clicking on the property name, but apparently not.

Any thoughts?

Hello Community,

Is there a programmatic method or specific property to differentiate system-defined (/csp/altelier , /api/mgmnt and so on)  or user-defined web applications in IRIS?

Thanks!

Hi everyone,

I'm working with JavaScript in InterSystems IRIS, specifically in CSP pages. One issue I'm running into during development is that the browser keeps loading the cached version of my JavaScript files, even after I’ve made changes or recompiled the code.
I would have to clear my cache files or browser history for it to reload and work.

Is there a recommended way or best practice in IRIS to automatically clear or bypass the browser cache for JavaScript?

The below code is not working. its unable retrieve Record count and merge files

Class Util

{

ClassMethod zPyRecordCount(inputfile) As %Integer [ Language = python ]

{

    import pandas as pd

    import iris

    import io

    try:

        df = pd.read_csv(inputfile, sep='|')

        recordcount=len(df.index)

        sys.stdout.write(len(df.index))

        return recordcount

    except Exception as e:

        return 0

}

ClassMethod zPymergefiles(file1, file2, outputfilename) As %Boolean [ Language = python ]

{

    import pandas as pd

    import iris

    import io

    try:

        dataframe1=pd.

Hi noble devs!

Just building a simple frontend->JSON->IRIS backend story, and figured that IRIS while importing via %JSON.Adaptor wants JSON fields to match property names, meaning even should match the case. Like:

{ name: "John""Doe"

will have issues while saving the dynamic object to a class Sample.Person with:

%Persistent%String

As soon as the case is not the same... 

Is there any setting to fix this?

Hello Community,

When handling a %CSP.REST API response for a custom endpoint, how can I capture or access the response content before it is written to the output buffer and sent through the Web Gateway to the UI?

In manually created REST services (for example, with a route like:<Route Url= ),
the response is typically written from within any class method in the execution flow.

Is there a way to intercept or log the response content before it is sent to the client?

Thanks!

I'm running the image "containers.intersystems.com/intersystems/irishealth-community:2025.1" as a container on my local Docker desktop.

Now I want to set up an ODBC SQL connection, but I don't know how to do it.

I have tried various ways without success. Like building my own image (see "Dockerfile" description below).

I have also added ODBCINI variable in my docker-compse (see "Docker-compose.yml" description below).

Anyone done this before?

I'd really appreciate some help.

Thanks.

Dockerfile
FROM containers.intersystems.com/intersystems/irishealth-community:2025.

I'm confused about the differences between a namespace and a database.

I understand that a database is a single IRIS.DATA file in a directory in the os hosting IRIS.

What is the difference between a namespace and a database?

Can I write data into a database without specifying a namespace?
If so how do I write to a particlar DB in objectscript?

Does a database have to be in a namespace?
Can a database be in more than one namespace?

Can a namespace have only one 'routine' database and only one 'data' database?

Whats the significance of creating an Index with Data Keyword in Index