#Health Connect

Hello,

I have a EnsLib.HL7.Operation.FTPOperation that uses SFTP protocol and public/private key to connect to an external vendor moveitcloud.

Issue: The vendor is planning to enable Multi Factor Authentication for this file transfer account.

Question: Have you configured a SFTP operation to use Multi factor Authentication? If not, is there another way?

Thank you,

I am working on my first REST operation to send a API Request to an internal server within our Network. I have finally got past the point of being able to connect using a SSL/TLS Configuration, but I am getting a ERROR <Ens>ErrHTTPStatus: Received non-OK status 403 from remote HTTP server: 'HTTP/1.1 403 Forbidden'.

I have tried using $$$TRACE within my operation to capture the different elements that are being sent to verify the Server, URL, SSL Configuration, and payload. Is there a way that I can see the entire RAW request message that is being sent to see why I might be getting a 403 erro

Hi All,

If I remember it correctly there is a functionality in IRIS to make this possible.

I've got two incoming Business Services of files from different sources.

BS1: An Ens.StreamContainer with some info and metadata which point to a specific file. Ens.StreamContainer will be send to a BP.

BS2: The files where the metadata points to. It's in the Ens.StreamContainer

But dependent on the flow the file could be later available on BS2. So I want the BPL to wait for the file to arrive at BS2. 

Then in the BPL I want to do some merging stuff with the 2 Ens.StreamContainers

So i'm looking f

Hi All,

We're doing our first babysteps with embedded Python and IRIS with an interoperability solution. We want to convert a CSV file to an Excel xlt file.

As service we've got a EnsLib.File.PassthroughService which picks up a csv file

As operation we've got a EnsLib.File.PassthroughOperation which writes the Excel file.

In the middle:

We've created an Business Process with an %Stream.GlobalCharacter in the Request and a %Stream.GlobalCharacter  in the Response.

But how do we get the %Stream.GlobalCharacter in the Python ClassMethod? Ideally I don't would like to write the stream first

Recently I started moving some of our JDBC Gateway configurations over to using the Microsoft JDBC Gateway driver instead of using the jTDS open source driver. I have noticed since then that those Objects that are using Microsoft JDBC Driver are throwing a lot more errors than the jTDS driver ever did, which I can understand however I am puzzled that I keep running into an issue with the Java Gateway Service within the Interoperability engine.

Every so often I will start seeing "Gateway Server failure timeout on 127.0.0.1:55550" followed by "Gateway Server did not respond to PING request..."

InterSystems has corrected two defects.

The first defect can cause an ECP application server to hang. This defect is only relevant to ARM and IBM Power processors; it is present in version 2022.1.2 and 2022.1.3 of InterSystems IRIS®, InterSystems IRIS for Health™, and HealthShare® Health Connect. The correction is identified as DP-423661. The defect is addressed in all future versions. 

The second defect can, in rare circumstances, cause dejournaling to hang. This defect is present in versions 2020.4, 2021.x, 2022.x, and 2023.1 of InterSystems IRIS®, InterSystems IRIS for Health™, and Healt

Hi

We've been asked to develop a HL7 interface, but the end system has very different needs than any we've ever interfaced with before. We need assistance to determine if these needs are things HealthShare can support that we're just not aware of, or whether we'll need to develop some custom code to accomplish this.

This end system wants us to send HL7 messages completely asynchronously, one after the other without waiting for any form of ACK or NAK. My first thought was that we could have an outbound HL7 operation which set the session to deferred, with a separate inbound listener service on

The extended maintenance releases of InterSystems IRIS, InterSystems IRIS for Health, and HealthShare Health Connect 2023.1.1 are now available. This release provides bug fixes for the previous 2023.1.0 releases.

You can find the detailed change lists / upgrade checklists on these pages:

• InterSystems IRIS
• InterSystems IRIS for Health
• HealthShare Health Connect

How to get the software

The software is available as both classic installation packages and container images.  For the complete list of available installers and container images, please refer to the Supported Platforms webpa

Hello!

In a transformation (DTL) I create an XML and pass it to an EnsLib.EDI.XML.Operation.FileOperation.

The receiver does not accept an empty tag (eg <Analysis/>) that is created automatically
if the tag has no values ​​in underlying tags. I have tried with action='remove' in transformation
and other things but it only clears the content.

I need to remove the tag completely. Appreciate if anyone has a tip?

Sincerely, Michael Lundberg

Hi all

I need to do hardware maintenance on a physical HealthConnect server which forms one half of a mirrored pair, and  It will require multiple restarts.

So, I will need to prevent any HealthConnect services from restarting until all maintenance is completed. Is this just a case of disabling the service "HealthConnect Controller for <SERVERNAME>", or is there anything else I need to be aware of?

Andy

How do I determine the size of an X12 message within the Rule Editor?  I should add this is for HealthConnect or Ensemble.

The FullSize property always shows 122, and the FullSizeGet method isn't available within the Rule Editor.

Our vendor can't handle messages over 500,000 characters, so I need to write those to another queue for later processing, and to get the interface into they're system from crashing.

Thanks,

Hi Community,

Watch this video to learn how to manage your HealthShare HealthConnect Cloud deployments using the InterSystems CloudServices Portal. Inspect the details of your deployment, create users and productions in Health Connect Cloud, and access the System Management Portal for a given deployment:

⏯ Navigating the Health Connect Cloud Portal

One of the most common needs of our clients is the creation of REST services that allow access to the information present in IRIS / HealthConnect. The advantage of these REST services is that it allows the development of custom user interfaces with the most current technologies taking advantage of the reliability and performance of IRIS in the back-end.

In today's article we are going to create a web service step by step that will allow us to both store data in our database and later consult them. In addition, we are going to do it by configuring a production that allows us to control the flo

Forgive me but our System Administrator who knows how the networking works is OOO...

How does IRIS know which local adapters are available to populate in an Inbound or Outbound TCP Adapter Object? We recently moved from HealthShare Health Connect 2018.1.3 to IRIS HealthShare Health Connect  2022.1. When we migrated we moved the VIP over to the new box and set it at the hardware level.

On RedHat when I do an ifconfig I have two ens192 adapaters..

ens192: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 8900
        inet xxxxxx  netmask xxxxx broadcast xxxxxxxx
        inet6 xxxxxxx  prefixlen 6

InterSystems has corrected a defect that causes increased process memory usage.

Specifically, the increased consumption of local process partition memory occurs when executing $Order,  $Query, or Merge on local variables.  While this will have no detrimental impact for most running environments, environments that support a large number of processes or closely limit Maximum Per-Process Memorycould be impacted.  Some processes may experience <STORE> errors.

The defect exists in 2023.1.0.229.0 but it is reposted as 2023.1.0.235.1 with the fixes included, to expedite the correction without clie

The below code gives a empty string output.

Set secretSigned = ##class(%SYSTEM.Encryption).RSASHA1Sign(512,token,secret)
      

The secret is a valid PEM private key.

Is there any more logic that needs to prefix this method call?

Ran into an issue with our upgrade from HealthShare Health Connect 2018.1.3 to IRIS HealthShare Health Connect 2022.1, that I thought I would reach out about, I already have a ticket open with WRC and started a chat on Discord. We have a couple of MS SQL tables that I have setup as Linked Tables within Cache to query NPI, Patient Account Information, Visit information, etc... When we upgraded last week we found that within a day or even a half a day that we were having problems with our JDBC connections.

Upon investigating with WRC we were able to track it down to our Queries against Linked T

How to read the HL7 V2.5 messages irrespective of message type to Iris database ?

Source system sends HL7 messages of multiple message types to Intersystems through TCP and these messages are to be inserted/read into iris SQL database.

Hello Community,

The Certification Team of InterSystems Learning Services is excited to announce the release of our new InterSystems HL7® Interface Specialist exam. This is an updated and rebranded version of our previous HL7 exam, formerly know as HealthShare Health Connect HL7® Interface Specialist. It is now available for purchase and scheduling in InterSystems exam catalog. Potential candidates can review the exam topics and the practice questions to help orient them to exam question approaches and content. Candidates who successfully pass the exam will receive a digital certification badge that can be shared on social media accounts like LinkedIn.  

You may have already heard that, starting with IRIS and HealthShare HealthConnect 2023.2 versions, the internal Apache Server will be removed from the default installation, so it will be necessary to have an external application server such as Apache Server or NGINX.

In this article I am going to proceed to install a HealthShare HealthConnect 2023.1 so that it works with a pre-installed Apache Server. For this I will use a virtual machine on which I have installed an Ubuntu 22.04.

Installing Apache Server

As we have indicated, we must previously install our Apache Server and we will do so f

Hello everyone,

I am looking for a sort of REST interoperability adapter that can forward REST calls within HealthConnect. If necessary, we need to adjust the requests or responses.

For Fhir calls, we use the FHIR Interoperability Adapter. This works perfectly; a message comes in as HS.FHIRServer.Interop.Request, and a message HS.FHIRServer.Interop.Response goes out. I can make adjustments as needed to both the request and response. I am looking for the same functionality, but then for non-FHIR REST calls.

When I create a web application, the requests come in as %CSP.Request, and I can forw

Hi All! Wanted to share a recent video we released, for those of you who may be getting started with InterSystems HealthShare Health Connect Cloud. This video walks through all the management tasks you can complete via the InterSystems Cloud Services Portal that you use with Health Connect Cloud. Feel free to reach out if you have questions!

Welcome, dear members of the community!

In this article we are going to demonstrate the great potential that IRIS/HealthConnect makes available to all its users with the use of Embedded Python and we are going to do it by developing a small production that will allow us to recognize and identify the faces present in a JPG file from some images that we will use as a reference.

Project configuration:

Let us begin! We have published the entire application in OpenExchange so that you only need to download and deploy it in Docker as you can read in the associated README file. As you will see, it

I am running into an error trying to send an Alert Email to test the functionality of IRIS HealthShare Health Connect  2022.1 compared to Cache HealthShare Health Connect 2018.1.3. I was trying to send an Alert email, when I am getting the following error on my EMailAlert operation which is using EnsLib.EMail.OutboundAdpater.

I verified the message to the EMailAlert was populated, so what could be throwing this error...

I found the problem to be with osuwmc.AlertEmail that was crea

InterSystems has corrected a defect that can cause corruption of databases and journal files on AIX systems with IBM POWER8 or later POWER processors. This defect can be triggered only when database or journal encryption is in use.

 To trigger this defect, the following conditions are required:

• The environment uses database or journal encryption
• The environment also uses data-element encryption
• An encryption key used for data-element encryption has been deactivated

If the environment satisfies all these conditions, then the key schedule used for database or journal encryption can be

A common need for our customers is to configure both HealthShare HealthConnect and IRIS in high availability mode.

It's common for other integration engines on the market to be advertised as having "high availability" configurations, but that's not really true. In general, these solutions work with external databases and therefore, if these are not configured in high availability, when a database crash occurs or the connection to it is lost, the entire integration tool it becomes unusable.

In the case of InterSystems solutions, this problem does not exist, as the database is part and the cor

Is it possible to compile classes on a current version of the platform for a previous version?   So using a compiler switch to compile classes that will run on a prior version?

We are implementation partners building a set of tools and we would like to ensure that the code will run on earlier versions we don't have access to.

I am trying to finish build for moving to IRIS HealthShare Health Connect 2022.1 from HealthShare Health Connect 2018.1.3. I am currently using Delegated Authentication using an AD group to match up to the Role in IRIS. The Role has access to everything but the HS Resources because we don't really use the HS Resources for anything. We are mainly using IRIS for the Interoperability Engine. 

When I run System Administration --> Security --> Security Advisor, I am getting the following error.... "It has been logged to system error log (System Operation>System Logs>Application Error Log)." When I

I'm always on the lookout for tools that make the development and testing of my interfaces more efficient. A couple of years ago I came across HL7 Spy, from Inner Harbour Software. It quickly became my go-to tool for running message comparison reports for interface engine migrations, message statistics gathering, and troubleshooting message receipt and delivery. It also offered enhanced functionality for things like fetching messages via sftp that other tools don't provide.

I've recently been working with HL7 Spy's author, Jon Reis, to enable support for fetching messages directly from the Ensemble message store. Its SQL Loader feature now has native Caché/IRIS support, and I've contributed a small server-side class to support the extraction of messages using it.