#Ensemble

Dear Community,

I need to collect a file from an FTP server over FTPS.

I have the :

• credentials saved correctly
• correct host and port informatoin
• correct filepath I am trying to collect from
• I have setup the SSL configuration in  System > Security Management > SSL/TLS Configurations and this tests sucessfully

When I run the business service to connect it connects, but soon after connecting it fails to open the directory:

Hello 

We are pretty new to Ensemble and we are considering on using a default setup for our production. Let me explain the situation. We have one sender that sends HL7 ADT messages to our system. We have 60+ other systems that need to recieve ADT messages. We where thinking on a few ways on how to do the setup. 

Setup1:

We create one big ADTRouter that contains a first mapping. The result is send to another big ADTRouter that contains all the filters/expressions and mappings for the recieving systems.

Hi everyone,

I'm working on a DTL that transforms an HL7 message (EnsLib.HL7.Message) to an XML document (EnsLib.EDI.XML.Document).

The target XML is based on a custom schema and has an element like:

What I need is for the output to show:

<deceasedDateTime xsi:nil="true"/> when the source HL7 value is empty, for eg: 

<portalPatientUpdate xmlns:xsi="http://www.w3.

Introduction

If you're solving complex problems in ObjectScript, you probably have a lot of code that works with %Status values. If you have interacted with persistent classes from an object perspective (%Save, %OpenId, etc.), you have almost certainly seen them. A %Status provides a wrapper around a localizable error message in InterSystems' platforms. An OK status ($$$OK) is just equal to 1, whereas a bad status ($$$ERROR(errorcode,arguments...)) is represented as a 0 followed by a space followed by a $ListBuild list with structured information about the error. $System.Status (see class reference) provides several handy APIs for working with %Status values; the class reference is helpful and I won't bother duplicating it here. There have been a few other useful articles/questions on the topic as well (see links at the end). My focus in this article will be on a few debugging tricks techniques rather than coding best practices (again, if you're looking for those, see links at the end).

Hey everyone.

I'm currently looking at a process where we're utilising the Class Ens.StreamContainer, and was looking to do some deletions outside of any purge routines.

Having been burned before, I wanted to make sure that deleting the container also deletes the contents within.

From looking in the class, the  %OnDelete ClassMethod appears to be removing an index from a search table and nothing more.

Am I looking in the right place, or is there a extended class for Ens.StreamContainer that does in fact delete the %Stream.Object
contained within the Ens.StreamContainer?

Sample with multiple Items;

MSH|^~\&|GMRC IF CONSULT|XXX^XXXXX^DNS|GMRC IF CONSULT|YYY^^DNS|20250123175341+0000|CRNR|ORM^O01^ORM_O01|Q5808332894T6790522104|T|2.

I need to add an extra blank OBX segment after a segment containing text, Total Cost:

I get the OBX segment but it is in incorrect location.

It should be after the line containing Total Cost:

It needs to contain:

OBX|1|TX|2000.02^REASON FOR REQUEST^AS4|

code:

    //Do pOutput.SetValueAt(tOBXText_"~~","ORCgrp(1).OBRuniongrp.OBXgrp("_i_").OBX:5","set") //
         If (tOBXText[ "Total Cost:") {
             Set tSegmentOBX = ##class(EnsLib.HL7.Segment).%New()
             Set tSegmentOBX.SegType = "2.3:OBX"
             Set tSC = tSegmentOBX.SetValueAt("OBX", 0, "set")
             Set tSC = pOutput.

I am receiving the garbled text due to incorrect encoding or decoding. I tried to use the $zconvert function to convert it into the normal text but failed to do that. Can anybody suggest what I have to use to convert that into normal text?

Example: Garbled text that I am getting is "canââ¬â¢t , theyââ¬â¢re".

how can I get the classMethod name ?
like we get class name using "$CLASSNAME($THIS)", same way I need class Method ?

I need to generate a DDL file from a .cls class that already exists, the idea is to create a mirror table in SQL. Is it possible to do this export or do I need to do the CREATE TABLE manually?

We are receiving the report in text format and it has special characters like ', - like that in the text. Source system is using the UTF8 encoding format hence the text is showing as ' � ' . Is there a way to convert the utf8 to actual character in the DTL.

Thank you,

This article shares analysis in solution cycle for the Open Exchange application TOOT ( Open Exchange application )

The hypothesis

A button on a web page can capture the users voice. IRIS integration could manipulate the recordings to extract semantic meaning that IRIS vector search can then offer for new types of AI solution opportunity.

The fun semantic meaning chosen was for musical vector search, to build new skills and knowledge along the way.

Hi all,

I'm triying to create a SOAP Pass-through acording to Configuring Pass-through Business Services instructions, but I'm not able to run it

I'm using the following WebService

http://www.dneonline.com/calculator.asmx?wsdl

Has anyone tried using Server-Sent Events with Caché/HealthShare/Ensemble and angularjs?

 I have dynamic sql select query ,

Set resultset = ##class(%ResultSet).%New()

 set sql = "SELECT COUNT(*) FROM "_tableName_" WHERE "_fieldName_">='"_fromDate_"' AND "_fieldName_"<='"_currentDate_"'"

 SET SC = resultset.Prepare(sql)

 SET SC = resultset.Execute(sql)

How can I print/view the count ?

I need to make changes to  OBX 5 which shows as immutable

I have tried ConstructClone, ThrowOnError, and Streams but I can't get the syntax correct

Example

OBX|1|TX|2000.02^REASON FOR REQUEST^AS4|142|REASON FOR REQUEST:      Total Cost:           0.00||||||O
                                        ^^^^ remove "REASON FOR REQUEST"                                                                            ^^ add cr/lf so down stream reports can be formatted more easily

I have the code done to parse out the "REASON FOR REQUEST" but I need to make the OBX 5 show the change.

Before:

OBX|1|TX|2000.

InterSystems FAQ rubric

You can use the WriteToConsoleLog method of the %SYS.System class to write any message to the console log.

The following is an example:

%SYS>write ##class(%SYS.System).WriteToConsoleLog("xxxxx log message",0,0)
1

For details on the parameters that can be specified in the WriteToConsoleLog method, please refer to the following document:

Class Reference (%SYS.System) 【IRIS】

Class Reference (%SYS.System)

Greetings,

Is it possible to change the date format from YYYYMMDDHHMMSS to YYYYMMDD in a DTL? How?

I tried ConvertDateTime() without success. 

I'm using Iris for Health

Thank you!

Is there a generic process for "walking" the structure of a virtual document - eg an HL7 message (EnsLib.HL7.Message) or an XML document (EnsLib.EDI.XML.Document).

At least we'd want to be able to visit all "nodes" (HL7 fields or sub-fields, XML nodes) in the virtual document and be able to work out/generate the Property Path (so we could call "GetValueAt"). 

We can just about come up with something generic for HL7, since it only nests down to 4 levels within each segment, though we're using numeric Property Path's at that point rather than symbolic ones (MSH:1.3 etc).

I have a HL7 DTL in which I'm doing a lookup to a table based on a code value in the IN1:3 field.  That incoming code may have a 1 to 1 mapping, or 1 to many mapping in a table.  If it's a 1 to many, the values in the lookup table are comma delimited.  If it's 1 to 1, that IN1 segment will map straight across.  If it's one to many, I need to create additional IN1 segments.  For example, if the incoming code maps to three, I need to map the original IN1 segment with one of the mapped codes, then create two additional IN1 segments with the other 2 codes for a total of 3 IN1 segments.

I have text coming in CCDA file as below:

    virus vaccine

    ¹

I want to get the entire value available inside the content tag. Can anybody please help me out how to get this?

InterSystems FAQ rubric

This can be done with TRY-CATCH:

 #dim ex As %Exception.AbstractException
 TRY {
    //Code that causes an error
  }
  CATCH ex {
     do ex.Log()
  }

If you use ^%ETN, call it from the BACK entry (BACK^%ETN).

Please also take a look at the related article: How to get application errors (^ERRORS) using a command

Hello there 🙋‍♂️,

I'm looking towards a functionality alike Python's difflib, but made with Intersystems products. I already know could embed Python code within IRIS but thought maybe there was a development already done for handling deltas, with a different approach or extra utils.

Even if I find such a library after comparing both might still go with difflib or any other more suitable. Intend to use it for a cross-environment checklist/check tool.

Please find below a sample of HTML rendering computed and made with difflib, with a few lines of code:

thanks ! best regards,  

We are calling a REST web-service from Ensemble using EnsLib.HTTP.OutboundAdapter and redefining the adapter class to set custom headers as described by @Eduard Lebedyuk here: How to set Content-Type

During development we accidentally stumbled across puzzling behaviour - we now suspect that the %Net.HttpRequest object created in the linked example is being reused in the following scenario:

1. request is created as described and sent to web-service, so an instance of a %Net.HttpRequest object exists and is known to the EnsLib.HTTP.

Hello everyone,

I'm looking for a practical project guide to help me gain hands-on experience with InterSystems Ensemble HL7. Ideally, this guide would walk through building a small project — something that covers key concepts like message routing, transformations, and interoperability.

If there's a resource that also includes step-by-step instructions and perhaps even offers a certification upon completion, that would be perfect.

Any recommendations or guidance would be greatly appreciated. Thanks in advance! 😊

Looking for a SQL query or any other method to find the Unique/distinct message counts for all productions or at least per production namespace within a given time frame. For e.g TimeCreated = January 2025 (Whole month)

I have used the following, but its not restricting the numbers based on the TimeCreated filter. Every time a new message is processed by system, its added to the total. I am running the query in today's date

Select Sum(MsgCount)

From

(Select DISTINCT TargetConfigName, count(DISTINCT SessionID) as MsgCount

FROM ENS.

If there is a way we can find how much a particular namespace is utilizing the O/S CPU and memory, that will be great in resource utilixation as well as capacity planning.

Hello, dear colleagues.

I need to connect to a remote JavaGateway from an Ensemble service.

I am trying to use the EnsLib.JavaGateway.Service with a remote host where the JVM is running.

I can successfully ping the remote Java Gateway from EnsLib.JavaGateway.Service, and Ensemble reports that the service status is OK.

There are no network issues, and all necessary ports are accessible.

My requests work without any problems when I specify localhost in EnsLib.JavaGateway.Service.

Hi ,

I have a scheduler task and an associated class that works.

Class Sample.Util.CreateTask Extends (%SYS.Task.Definition, %Persistent)
{

Parameter PROPERTYVALIDATION = 1;

Parameter TaskName = "Sample.Util.CreateTask";

Method OnTask() As %Status
{
// Perform the logic
}

}

Is there a way to Enable or Disable the above task "CreateTask()" from an external function/Method/class ?

The compile step in VS Code when using the InterSystems VS Code extensions appears to modify line endings in our class files when newly pulled from remote repo.

What steps can we take to stop this happening? / What settings can we modify?

We are doing local development with client side source control using git (BitBucket Cloud repository). We were previously using GitLab (locally hosted) and didn't have this issue. Developers are all on Windows machines, as are all the Ensemble instances. We believe we have autocrlf = true in all our local git configurations.