#Ensemble

Content of log file as following:

Windows:  6.2.9200, SP 0.0, Product Type 1
Process:   D:\DHC\DEVSOFTWARE\ENSEMBLE\BIN\CSTUDIO.EXE
Version 2016.2.3.907
Module:  C:\WINDOWS\SYSTEM32\MSVCR120.dll
Date Modified:  05/24/2017
Exception Code:  C0000005
Read Address:  00791000
Instruction:  F3 A5 FF 24 95 50 F4 FA 73 8B 44 8E FC 89 44 8F
Registers:
EAX: 1228C068  EBX: 004C0048  ECX: 002C3C38  EDX: 00000002
ESI: 00791000  EDI: 1291CFD8  ESP: 0019E7F0  EBP: 0019E814
EIP: 73FAF66C  EFlags: 00010216
Call Stack:
73FA0000  C:\WINDOWS\SYSTEM32\MSVCR120.dll
  +0000F66C  Exception Offset
0B660000

We're planning to use Production Validator for validating our system upgrade (2016.2.3 to 2024.2) , and we are trying to understand what kind of benchmarking or performance metrics others have observed during similar efforts.

Specifically, we are looking for a case study or real-world example that includes details like:

• How many messages were validated?
• How long did it take to create the temporary database from the source system?
• How long did it take to run the comparison on the destination system?

If anyone has done this recently and can share some stats or lessons learned, that would be

Hello,

I am currently trying to install InterSystems IRIS for Health and specifically the Ensemble integration tool, but I am facing issues.

Here are the details of my setup:

• Version of IRIS: 2025.1 (Community Edition)
• Operating System: [Insert your OS here, e.g., Windows 10, Ubuntu 20.04, etc.]
• Issue: I have downloaded IRIS for Health, but I cannot find Ensemble during the installation process. I have tried using the Early Access programs, but Ensemble is not included in the options I can choose. I have also tried installing various versions of IRIS, but still, Ensemble is missing.
• What I

Hi all,

My team is exploring options for handling timezone offsets in DTL and we’re wondering if there are any built-in methods available — ideally low-code or no-code solutions. Specifically, we're looking for a way to adjust timestamps based on the date and whether Daylight Saving Time (DST) is in effect.

For example, if an HL7 message has an MSH-7 value of 20250518144529, it should be converted to 20250518144529-0500 (Central Daylight Time), but if the timestamp were 20250218144529, it should be 20250218144529-0600 (Central Standard Time).

We’re fairly new to InterSystems and want to make

Hi Community,

We're pleased to invite you to the upcoming webinar in Hebrew:

👉 Discover the All-New UI in Version 2025.1 — and More!👈

📅 Date & time: June 11th, 3:00 PM IDT

Hi Guys,

How can I send JSON with HTTP post request?
Thanks

I need to create a task to read the contents of file in an IRIS file system and store it in Persistent DB. What is the type of property thats defined in the Task that lets user select the input directory.

Hello Community,

When I run the following code with x undefined in terminal, it throws a syntax error and returns control to the program stack. After issuing a GO command, execution continues, and setting the global variable ^zz1.

code 1:

test.mac
if$Data(@x@(a,b,c)) {
    set^zz1=1212
}
write !,1212,!
////orif$Data(@x@(a,b,c)) set^zz1=1212write !,1212,!

 if I assign the result of $D(@x@(a,b,c)) to a local variable like d using set d=$D(@x@(a,b,c)), and then use if d { ... }, the code fails(global is not set) working as expected.

Code 2

test1.mac
setd=$D(@x@(a,b,c))
 ifd {
     s

WSDL for a CDC vendor was provided with a URL using a custom socket (non 443). Everything generated fine, but when making calls to their https:// URL that has their custom port in the URL - no response comes back. The assumption is, their server isn't even processing the request, as Postman does using the custom https://path.to.server:NNNN port in the URL.

I see with a normal web operation that uses %Net.HttpRequest overriding the port property is easily done - but no animal seems to exist for any generated SOAP Operation class.

As part of a process to generate FHIR XML bundles from HL7 messages, I have a subtransform transforming segments of an MDM_T02 message into a section of XML (EnsLib.EDI.XML.Document). So far this has worked well although I've encountered strange behaviour when making use of an xmlns attribute, whereby the attribute's name is duplicated despite the schema and DTL editor displaying it correctly.

Here's a snippet of the div.xmlns definition from the XSD schema used

Has anyone else encountered this? Any help is much appreciated

I am writing to express my interest in the "IRIS Ensemble Integration . I have 2 years of experience as an Ensemble IRIS Developer, working with Ensemble and IRIS for integration, server management, and application development. Looking for more opportunites to work under Iris Cache Objectscript

Business Process is adding control characters.

Input HL7 shows no control characters in Notepad ++

Output

Code:

Method FromCerner(pRequest As EnsLib.HL7.Message) As %Status
{
    #dim tStatus As %Status = $$$OK
    #dim eException As %Exception.AbstractException
    #dim tOBXText As %String
    #dim tItemNumberCount As %Integer = 0
    #dim tItemNumberProcessed As %Integer = 0
    #dim tTotalCostSegment As %Integer = 0
    #dim tOrderType As %String
    #dim i As %Interger = 0
    #dim tOBXKey As %Integer = 0
    #dim tOBXTextChanged As %String
       ////
       Set pOutput = pRequest.%ConstructClone(1) //

Hi group,

I am trying to take the InterSystems HL7 Interface Specialist certificate test. 

So is this an open book test? is there any Lab involved with vm?  I did the search but I am not able to find such information.

I am trying to find out more information before I actually take the test.

Thank you

It helps to remove special characters, such as non-utf-8 characters either control characters or unicode characters from text that is not printable or can't be parsed by downstream systems.

There is also $C(32) in this condition; sometimes NBSP appears in the text and it will not be recognized by TIE, but downstream it displays as "?".

In order to avoid the NBSP issue, the if condition is replaced with a space in order to prevent the error.

Unicode characters only Remove:

Class Test.Utility.FunctionSet Extends %RegisteredObject
{ 
ClassMethod ConvertTextToAscii(text As %String) As %String
{
 Set (str

We have classes in a Production environment that are causing us some issues - example attached.

When we export them from the production environment the XML contains a snippet like the following:

<UDLText name="T">
<Content><![CDATA[
//Property any As list Of %XML.String(XMLNAME = "any", XMLPROJECTION = "ANY") [ SqlFieldName = _any ];

]]></Content>
</UDLText>

When imported and compiled into an Ensemble instance this class works as expected.

When viewed/edited in a development environment we run into issues - the presentation is similar with both Studio and VS Code.

On first viewing in Studio

One of the challenges of creating a DICOM message is how to implement putting data in the correct place. Part of it is by inserting the data in the specific DICOM tags, while the other is to insert binary data such as a picture - In this article I will explain both.

To create a DICOM message, you can either use the  EnsLib.DICOM.File class (to create a DICOM file) or the  EnsLib.DICOM.Document class (to create a message that can be sent to PACS directly). In either case, the SetValueAt method will allow you to add your data to the DICOM tags.

A DICOM message consists of two constituent parts, Co

Has anybody tried to extend the Menu on Management Portal? I like to add a new page or a dashboard that will be created soon to the Management Portal and allow others to use it also. I understand there are risks that I could lose things during an upgrade. I am okay with that. Does InterSystems support such an effort?

Prefer not to read? Check out the demo video I created:

I need a DTL to handle this.

Any ideas appreciated.

For all Prosthetics orders:
when ORC-1(Order Control) is "NW" (New Order), need to update OBR-18(Placer Field 1) based on PV1-2 (Patient Class) value.
assumption is that the selection logic is that all prosthetics orders with OBR-18 field is always blank.
Description :
If PV1-2 is I, insert I in OBR-18
If PV1-2 is O, insert O in OBR-18
If PV1-2 is E, insert O in OBR-18
If PV1-2 is P, insert O in OBR-18
If PV1-2 is R, insert O in OBR-18
If PV1-2 is B, insert O in OBR-18

New at DTL. I need some pointers on this DTL

For all Prosthetics orders:
when ORC-1(Order Control) is "NW" (New Order), need to update OBR-18(Placer Field 1) based on PV1-2 (Patient Class) value.
assumption is that the selection logic is that all prosthetics orders with OBR-18 field is always blank.
Description :
If PV1-2 is I, insert I in OBR-18
If PV1-2 is O, insert O in OBR-18
If PV1-2 is E, insert O in OBR-18
If PV1-2 is P, insert O in OBR-18
If PV1-2 is R, insert O in OBR-18
If PV1-2 is B, insert O in OBR-18

Hi all,

I can't find the list of business host setting sections and (crucially) how to refer to them in the SETTINGS parameter, as marked in purple here:

Parameter SETTINGS = "MySetting:Basic";

Does anyone know where this list lives?

Otto

I added extra OBX segments and I need to renumber OBX 4 so they are sequential.

Dear Community,

I need to collect a file from an FTP server over FTPS.

I have the :

• credentials saved correctly
• correct host and port informatoin
• correct filepath I am trying to collect from
• I have setup the SSL configuration in  System > Security Management > SSL/TLS Configurations and this tests sucessfully

When I run the business service to connect it connects, but soon after connecting it fails to open the directory:

Hello 

We are pretty new to Ensemble and we are considering on using a default setup for our production. Let me explain the situation. We have one sender that sends HL7 ADT messages to our system. We have 60+ other systems that need to recieve ADT messages. We where thinking on a few ways on how to do the setup. 

Setup1:

We create one big ADTRouter that contains a first mapping.The result is send to another big ADTRouter that contains all the filters/expressions and mappings for the recieving systems.

Hi everyone,

I'm working on a DTL that transforms an HL7 message (EnsLib.HL7.Message) to an XML document (EnsLib.EDI.XML.Document).

The target XML is based on a custom schema and has an element like:

<xs:element name="deceasedDateTime" type="xs:dateTime" nillable="true"/>

What I need is for the output to show:

<deceasedDateTime xsi:nil="true"/> when the source HL7 value is empty, for eg: 

<portalPatientUpdate xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
  <deceasedDateTime xsi:nil="true" />
</portalPatientUpdate>

My questions:

1. How can I correctly assign xsi:nil="true" in the DTL

Introduction

If you're solving complex problems in ObjectScript, you probably have a lot of code that works with %Status values. If you have interacted with persistent classes from an object perspective (%Save, %OpenId, etc.), you have almost certainly seen them. A %Status provides a wrapper around a localizable error message in InterSystems' platforms. An OK status ($$$OK) is just equal to 1, whereas a bad status ($$$ERROR(errorcode,arguments...)) is represented as a 0 followed by a space followed by a $ListBuild list with structured information about the error. $System.Status (see class reference) provides several handy APIs for working with %Status values; the class reference is helpful and I won't bother duplicating it here. There have been a few other useful articles/questions on the topic as well (see links at the end). My focus in this article will be on a few debugging tricks techniques rather than coding best practices (again, if you're looking for those, see links at the end).

Hey everyone.

I'm currently looking at a process where we're utilising the Class Ens.StreamContainer, and was looking to do some deletions outside of any purge routines.

Having been burned before, I wanted to make sure that deleting the container also deletes the contents within.

From looking in the class, the  %OnDelete ClassMethod appears to be removing an index from a search table and nothing more.

Am I looking in the right place, or is there a extended class for Ens.StreamContainer that does in fact delete the %Stream.Object
contained within the Ens.StreamContainer?

Sample with multiple Items;

MSH|^~\&|GMRC IF CONSULT|XXX^XXXXX^DNS|GMRC IF CONSULT|YYY^^DNS|20250123175341+0000|CRNR|ORM^O01^ORM_O01|Q5808332894T6790522104|T|2.3|||State|State|USA

PID|1||1013570973V041977^^^ICN^ID~1110106796^^^EDIPI^EDIPI||PROSTEST^EHR||19760902|M||||||||||129256619|678235672

ORC|NW|15207778763^XXX^GMRCIFR|||||^^^20250123175300+0000^^R||20250123175331+0000|XXX8051652^PCP1^Physician||XXX8051652^PCP1^Physician|||20250123175341+0000||YYY

OBR|1|15207778763^XXX^GMRCIFR||YYY^PROSTHETICS IFC^757Office1235||20250123175300+0000||||||||||XXX8051652^PCP1^Physician|||Implant Usage (PSAS)||||

I need to add an extra blank OBX segment after a segment containing text, Total Cost:

I get the OBX segment but it is in incorrect location.

It should be after the line containing Total Cost:

It needs to contain:

OBX|1|TX|2000.02^REASON FOR REQUEST^AS4|

code:

    //Do pOutput.SetValueAt(tOBXText_"~~","ORCgrp(1).OBRuniongrp.OBXgrp("_i_").OBX:5","set") //
         If (tOBXText[ "Total Cost:") {
             Set tSegmentOBX = ##class(EnsLib.HL7.Segment).%New()
             Set tSegmentOBX.SegType = "2.3:OBX"
             Set tSC = tSegmentOBX.SetValueAt("OBX", 0, "set")
             Set tSC = pOutput.Inse

I am receiving the garbled text due to incorrect encoding or decoding. I tried to use the $zconvert function to convert it into the normal text but failed to do that. Can anybody suggest what I have to use to convert that into normal text?

Example: Garbled text that I am getting is "canââ¬â¢t , theyââ¬â¢re".