#Ensemble

Hi, 

I am trying to input an entire xml into a sql server table. I am doing this via an operation in Ensemble.

I keep getting the following error

[SQL Server]XML parsing: line 0, character 0, unrecognized input signature

I have setup the table with a column parameter XML.

Here is the request object that is being sent to the store procedure

<reqSQL xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:s="http://www.w3.org/2001/XMLSchema">

<SQLScript>

{ call dbo.PopulateDataTable(?,?,?,?,?,?,?

Hi Guys,

Our clients are running Zen pages from Internet explorer and able to print with no issues but since they upgraded to Edge the can't print anymore, the user can select the printer from the listbox but it says "Printer Unavailable" ?

so far they installed MSDWebCient.msi  and also set Edge to run in IE mode following these steps :

1. Click on the Options  button in the top-right corner of the Edge browser and select Settings.
2. Click on Default browser on the left.
3. Click the dropdown menu for Allow sites to be reloaded in Internet Explorer mode. Select Allow.

Hi all,

I am busy trying out the %UnitTest.TestProduction class to implement some automated production testing.

I have a scenario which I am not sure how to get the final results of for assertion. Below is the scenario I am trying to test, with comments on what I have done.

• Receive a  request on a service (Service A).
• Send the request to the BPL
  • I use SendMessage of the TestProduction class.
• The BPL sends a request to a Business Operation (SendToProvider)
• The SendToProvider operation sends a message out to the Service Provider.
  DeferResponse is done.

I am trying to pinpoint and troubleshoot an issue we have been seeing lately. We have several SQL Outbound Adapter Operations that are seeing issues trying to connect to our MS SQL Servers using the JDBC Gateway for calling insert, select, update, and stored procedure calls.

ERROR <Ens>ErrFailureTimeout: FailureTimeout of 20 seconds exceeded in osuwmc.Visit.

Hi, guys, I need some help, I'm getting an XML from the Matrix application and in the header there's an Action that has the property mustUndertand = 1

<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
  <s:Header>
    <Action s:mustUnderstand="1" xmlns="http://schemas.microsoft.com/ws/2005/05/addressing/none">http://protocolomatrix.matrixsaude.com/RecebeResultado</Action&gt;
  </s:Header>
  <s:Body xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">

No BS Receives but cannot handle the action.

Hi Guys,

never mind this post is withdrawn  

Thanks

Good morning,

We would like to share with you a doubt, and we would appreciate if you could read and answer us.

Currently we have a file titled: "Imagen PatientID 9358340 PatientName Milagros ReasonForStudy 350290 InstitutionName 350290  StudyDate 20220927.xml" , in which we have the following InstitutionName:

    <DicomAttribute keyword="InstitutionName" tag="00080080" vr="LO">
        <Value number="1">350290</Value>
    </DicomAttribute>

Once we generate the DICOM file using the command  from the tool named "xml2dcm" inside the DICOM simulator package dcm4che:

.

I'm new user learning to use Iris and Ensemble. I'm trying to set up a TCP interface to send delimited data from Ensemble to another interface engine. I created File.PassthroughService to pick up the file and send the data to TCP.Framed.PassthroughOperation. The framing is MLLP and SSL configuration used. It is able to process small files around 50kb. When I drop a larger file such as 5mb, the operation is not getting the ack within the 60 sec timeout.

When using GUI is there a way to have Studio use the numbers for HL7 instead of the words for the path?

When in the code view is there a way to have Studio use single quote instead of double quote?

Hi Guys,

How can I include an Expando  in a tablepane, I would like that each row have an expando that I can use to include some other things as in the below screenshot

<column colName="SerialNo" header="Serial No" OnDrawCell="DrawLink" width="10%" filterType="text" filterOp="["/>

i've used the below so i can include the expando but its not working, so how can I include a zen control like expando onDrawCell or in my tablepane ?

Method DrawLink(pTable As %ZEN.Component.

Hi Community,

I am new to ensemble development, Can anyone share me few basic Concepts which will be helpful for Converting JSON message to other message types like HL7,XML 

Thanks,

Joe

Hi Guys,

is there a way or utility that we can drag & drop images in a Zen page?

Thanks

Hi Guys,

I'm getting a lot of hs_err_pid.mdmp & hs_err_pis.txt error files in the path where Cache.DAT in located and as I googled these seems to be Java error files and I'm wondering what this has to do with Ensemble, and is it alright to just delete them?

Thanks

Hi Community,

I am new to CDA to CDA transformation in ensemble, Can anyone explain how  Match,Select,Varibel,Attribute,Copy,Method Will work in CDA transformation using xslt stylesheets

Smythee

Hi folks, does anyone got the .sef file for the D93A EDIFACT (INVOIC specifically)?

Setting it up to an old customer but I lost my copy of it as I used it a long time ago.

Would be so helpful if anyone have it.

Thanks

Hello,

I've the below datacombo definition and when selecting an item from it and make this call:

var component=zen("Component").getProperty("value"); 

I would get the ID (first column) which is what I'm looking for

<dataCombo id="Component" name="Component"  align="left" size="30" maxRows="400" 
     sql="select ID, name From MSDS_Serenity.Kit Where (? is null or %UPPER(name)[%UPPER(?)) And Loc=? AND Active=1 and ParentKit  is not null and (RapidSterTemp !

Hi Guys,

Sorry I'm not that familiar in using Javascript in Zen pages, so basically we have a priting utility (app) that requires us to add a bit of JavaScript call to facilitate printing from our Zen pages as below:

So I added XData link pasted the required script, is this the correct way?

Thanks

Hi Guys

The navigation by default returns the Total records, how can I change that or allow the navigator to only show the number of records in the current page, or is there a property of Tablepane that returns the current page records No?

Thanks

Hi Guys,

I'm getting "ERROR #6084: Unknown errors detected" when compiling my CSP pages, the pages still works fine in the new 2018 system but can do any changes because of this error?

Thanks

I am experiencing an issue while executing a stored procedure in InterSystems Cache. Here’s the procedure I created
CREATE PROCEDURE Silk.

Hello,

I was just trying to get to the bottom of a TLS config - we have an interface with a TLS config that has had 'Server certificate verification' set to 'On', however the cert file specified either did not exist or contained a cert that was expired.

Does anyone know what the behavior is for this typically? I would expect this to not allow traffic on the interface, however this has been working fine for a few years now with an invalid cert specified for 'Server certificate verification' and set to 'On'.

Greetings.

I have a scenario in ENSEMBLE, where a business process router A is dependent on another business process router B.  If B shuts down for some reason, A has to be disabled as well.

Do i need to write a custom process for B and call the call back method onShutdown or something?

Any suggestions would be appreciated.

Thanks,

Jimmy Christian.

Hello,

I'm trying to carry a custom error from one business process to another.

BPL:LookupClass fails it's lookup and a custom error of "Lookup XYZ" is generated.

The class quits with that error, but upon quitting, the custom error gets wrapped in an Ensemble System error: 

ERROR <Ens>ErrBPTerminated: Terminating BP LookupClass # due to error: Lookup XYZ

This means, when I use the %LastError property to get the error message, it's not got the value I want to use. In this case, "Lookup XYZ".

Hi

We have a use case whereby very large HL7 MDM messages, which contain many OBX segments, need to be processed by a custom business process. Part of the process is to iterate over each OBX segment and set a value in the same field for each segment.

Testing with a message that is ~500MB and contains over 8000 OBX segments I've encountered <STORE> errors, which surprisingly seems to be due to using SetValueAt. It appears to get through a few thousand segments before it falls over with the memory error, which I assume is because the SetValueAt method keeps in memory each preceding OBX segment?

Hi Guys,

I've created a webservice where a third party web application that can communicate with Ensemble via webservices to post and get data in from of JSON, first call is a post call to login with user/password and Ensemble responds with success or failure than the following get calls, but I've been advised that I also need to return a Cookie to control the exchange and the session for a specific user, I'm not familiar with Cookie so any suggestions, how can I create a an authentication cookie and do i need to add it to my next Get calls ?       

Thanks

Hello,

Since version 2.12.6 of "Intersystems ObjectScript" extension in VS Code, the compile process force the EOF automatically to LF.
Have you encountered this issue and do you know how to resolve it?

Thank you,

Maxime

Every time I try to update an SQL table using odbc connection, I'm getting: ERROR <Ens>ErrException: <MAX $ZF STRING>zPrepareW+1^%Library.SQLGatewayConnection.1

Set sqlStatement = "UPDATE dbo.Table1 SET OriginalMessageText="_OriginalMessageText_"WHERE Id='"_Id_"'"
$$$TRACE("SQL Statement: "_sqlStatement)

I know that the problem is with the length of the ORU HL7 message  (that contains OBX base64 PDF file ) I'm trying to update in the table, but is there a way to fix this? other than truncating the message ?

I also tried this statement but it didn't work as well

Set sql = "UPDATE dbo.

IRIS Health Monitor is part of System Monitor (see here).
The intention is to further process the captured sensor reading in order to identify the "health" of a system by checking the sensor reading values against pre-defined Base, Min and Max absolute values, and alert accordingly. Additionally,  instead of absolute values, you can create Charts (which can be different for different periods of a day), that contain a learned minimum and maximum value after a time spent by the system (at least 24 hours) analysing sensor readings.

The sensor readings included in Health Monitor are defined here.

Hi everyone,

I'm working on a DTL that transforms an HL7 message (EnsLib.HL7.Message) to an XML document (EnsLib.EDI.XML.Document).

The target XML is based on a custom schema and has an element like:

<xs:element name="deceasedDateTime" type="xs:dateTime" nillable="true"/>

What I need is for the output to show:

<deceasedDateTime xsi:nil="true"/> when the source HL7 value is empty, for eg: 

<portalPatientUpdate xmlns:xsi="http://www.w3.