New post

#Business Rules

4

Business rules are the part of InterSystems Ensemble production solution which allow nontechnical users to change the behavior of Ensemble business processes at specific decision points.

Question
· Jun 19, 2017
Date Filtering Functionality

I have come across several cases where I need to set a Date filter to send only send any admit/scheduled date past a certain point. We have a couple different date comparison functions but none looking at the true date. Most of them are date + 15 or etc. Does anyone have a good date function they have written to say if x > 20170102 ?

Thanks

Scott

0 14
0 2.1K

Does anyone have experience in creating a Business Routing Rule using Exists function?

I've used the comma delimited 'In' function, but I would like more manageability. Entering and remove items from a look up table would be much easier to manage then changing the comma delimited string.

Messages go to error state.

0 3
0 1.4K

I would like to examine the contents of my OBX-5 field and not route the message if it contains alphabetic characters. I've tried various combinations of the Match and Contains functions, with no luck. Should I be using the COS ? operator or plaini regular expressions?

e.g.

OBX-5 Contains "\D"

OBX-5 Contains "?.A"

OBX-5 Contains "[A-Z]"

0 17
0 1.3K

this is catching me all the time, again and again...

Haven't worked with XML VDOC for some time, I can't figure out, what is the correct way of using Property path. Can someone please help me to refresh my memory.

Simple example: I have a class called Body, with Value and Topic properties. I created a XML Schema for this class and imported it into Ensemble. So i have a category called message, with Body as DocType structure and Name and Topic properties of Body complex type ($2:Value and $2:Topic are element names)

My rule looks this way:

0 3
0 1.1K

When testing a new routing rule, one frequently encountered problem is that messages that seem like they should be getting routed to a target component are not getting routed. This article aims to describe how to determine why the message didn't get routed.

1. Check the Event Log for the router to make sure there wasn't an error evaluating the rule or running any transformations referenced by the rule. If there was, debug that error first.

2 2
0 966
Question
· Jun 21, 2016
Business rule doubt

Hello guys,

I've built a simple rule , as follows:

Thing is, in rule 2, the operation succeeds, the message reachs BO HL7, but in rule 1 it does not go through. In rule 1, I have two different conditions, but they are linked by an OR and one of the conditions is simply IF 1=1.

Do you guys have any clue on why rule 1 does not reach BO HL7?

Thanks

1 17
0 843

I am currently trying to add a condition to a routing rule that uses the %Source property of a routing rule. Unfortunately I am getting compile errors when I use the "%", and if I get PROPERTY DOES NOT EXIST if I try and use any of field. I have tried referencing the messages as "Message." , "Record.", "FullRecordMapClassName." , "Document." . Does anyone know how to reference the properties of a record map in a routing rule, or if it is even possible? Thanks!

0 10
1 812

I have an interface that does not send me specific ID's, so I am scanning the AIL3.2 (Text) field for certain characters. The Routing rule is getting pretty big with all the OR statements. Is there a way that I can define what I am searching for in the data lookup table, and not have to scan the whole field that it does by default? Is there a way that I can simplify this?

0 3
0 793

Hopefully a simple question.

Using the Rule Editor, I can open a routing rule and easily define an 'effectiveBegin' and 'effectiveEnd' date. I want to utilize this date feature for a "sub-rule" (i.e. rule #1) but not the entire routing rule therefore impacting all other rules. I also do not want to split and create a brand new routine rule just to send the message to the target business process. It would be ideal to keep it contained within this single routing class that was created.

0 1
0 767

In this article I will demonstrate the following :

  • Update ReferencesRange(OBX:7) against ObservationIdentifier(OBX:3.1)[TestCode] from database by using custom utility function
  • Update Abnormal Flag(OBX:8) against ObservationIdentifier(OBX:3.1)[TestCode] and ObservationValue(OBX:5)[Result] from database utility function
  • Route Message based on Abnormal Flag(OBX:8)

Below is the primary and transformed HL7 2.5 ORU_R01 message:

Open Exchange app
1 6
0 736

Dear All,

I would like to block ADT_A18 and ADT_A47 HL7 2.3 messages with an empty MRG:1 field.

This is to prevent my current HL7 ADT router (Business process) sending blank Merges downstream.

I've attempted to create a business rule where this would return out the business role process. However the messages still loop though the other rules.

Any advice would be great.

Kind Regards

Stuart

0 6
0 723

I have a project to only filter certain pathology results into a downstream system.

Within a HL7 router and business I was planning on using a lookup table and either the exists() or Lookup(), but am having issues when using it with repeating fields or segments.

For example if I perform teh analysis per stated segment usign {} brackets this will work, as each stated repeat is assessed:

0 2
0 717

I created a DTL to do HL7 mapping. The test function in the tools works the DTL perfectly but when used by the rule in my business process, the OBX segments are stripped and the MRN is gone. The assigning authority and ID type are added into the PID but the actual patient MRN is blank (3.1 value).

Here is the source code.

0 8
0 690
Question
· Sep 14, 2018
Business Rule Looping

Does anyone know how to loop through a segment that is part of an ordered set in a Business Rule and if one of about 10 possible values exist in any of the iterations of the segemnt:field I then allow the message to be skipped?

It seems like it should be fairly simple, but i am having a difficult time figuring this out. The Contains function only allow for one value to be identified. I have tried the intersectsList and while I think I have it formatted correctly i believe it only allows for 4 values to be verified.

0 5
0 625
Question
· May 31, 2019
Conditions within ruleset

Hi guys

I have always struggled with this, tended to use workarounds but now decided to hear from more experienced people if this is something I am misunderstanding.

I need to basically add a "send" within the ruleset number 2, but without a need to associate a "when" node to it. Is this possible? What I basically need is to forward messages with status 160 to "ManageEDM" and also regardless of the status, it should get sent to "ManageRIS"

0 7
0 622

I've inherited a business service that takes a large XML document with repeating elements, extracts them via %XML.Reader and chunks them into separate persistent objects for delivery to a EnsLib.MsgRouter.RoutingEngine-based routing rule. Unfortunately, the lack of GetValueAt() for the message's class leaves me without much in the way of complex decision-making options.

0 3
0 599

We have a case where we have 1 message coming in, but then sending two messages out to the same location. Even with FIFO sometimes the messages get out of sequence depending on what is need to be done to the message in the DTL before send. Is it possible to call sleep or Halt or write some kind of a function to put a pause in a routing rule between two sends?

0 5
0 588

I'm trying to read PID-3 and route the message based on if a certain prefix existed, but I keep getting Property Does Not Exist.

I've tried

HL7.(PID:PatientIDInternalID()) Contains "COS"

HL7.(PID:PatientIDInternalID(1)) Contains "COS"

HL7.{PID:PatientIDInternalID()} Contains "COS"

HL7.{PID:PatientIDInternalID(1)} Contains "COS"

This is a 2.3 MDM message. Thanks!

0 1
0 544