Hello my friends,

I have a problem with logi report, 

in my store procedure,  I create code like this?

$ListToString(%DLIST(DISTINCT (ARCIM_Desc)),'<br/>') as "ARCIM_Desc", -> this is the problem

$ListToString(%DLIST(DISTINCT (MRDIA_ICDCode_DR)),'<br/>') as "MRDIA_ICDCode_DR", -> it's works fine

as you see there's a <br/> in the display of the report

I have no idea about this, maybe someone can help me fix this problem ?

Thank You

Best Regards,

Steven Henry

I recently started trying out Python in IRIS, but now I get this message repeated over and over again:

^Sources is not setup so hooks will not work

No idea where this came from and how it started. Any suggestions?

Hello my friends,

I have a problem with Objectscript, why the value of address become like this ?

everything works fine except the Address,

this is my code, do I need something to make this into real address ? should I put something in my code ? 

 set paper=obj.PAADMPAPMIDR.PAPMIPAPERDR

            if '$isobject(paper) continue

            set Address=paper.PAPERStName

thank you for your help

Best Regards,

Steven Henry

Hello my friends,

I have a bit problem with date format, I need to display like this DD-MM-YYYY

I've put the objectscript like this : set DOB=$zd(paper.PAPERDob,15)  

and the result is 

Why It cannot show the full year, I mean why 99 or 95 why not 1999 or 1995 ? 

Thank You

Best Regards,

Steven Henry

Hi,

If I test the Native api for Node.js from the documentation, I noticed (if I'm correct) all methods and calls are synchronous. By default due to the nature of Node.js, there is only one thread of execution and normally  all JavaScript methods and all calls should be asynchronous and use either a callback function (the "old way") or promises or the async/await contruct to return their result, e.g.:

• myFunction(params, callbackFunction(response))
• myFunction(params).

Hello and welcome to the Developer Ecosystem News!

The second quarter of the year was full of exciting activities in the InterSystems Developer Ecosystem. In case you missed something, we've prepared a selection of the hottest news and topics for you to catch up on!

I like Application Error Log a lot, both for its full stack and a big list of variables. I'd like to "hack" this functionality and record the same in this log when a certain variable has a certain value. This quasi error should not be visible to the user, and it should not interrupt the application flow. Is that possible?

Throwing an error in a try-catch block does not record the error, tested. I am considering recording variables and the stack differently, I know how to do both, but that would miss the nice Application Error Log functionality.

Upd: I got an immediate DC AI Bot reply.

Is there a way to change the background color of webterminal at the server side?

Maybe some *.class or *.css file on the Iris server?

I would like to have different colours on differents environments (test,pre,pro)

Thanks

Hello community,
Is there any built in class method to get the HTTP request and response message format from the %request and %response object. Similar to how a Web Gateway's HTTP Trace Facility captures HTTP messages.

Thanks!

I'm trying to gather more data for one of my namespaces so I can do some analysis. However when I run .BuildIndex() nothing populates in the resulting SQL table. I've tried deleting the class and reimporting and compiling and still nothing. I feel like I'm doing something OBVIOUS that's wrong but I can't quite figure out what it is. Here's what I'm doing (Customer name redacted)
 

Class CUST***.System.Cerner.Hl7.SearchTable Extends EnsLib.HL7.SearchTable

{



Parameter DOCCLASS = "EnsLib.HL7.

Hello Community,

I got below error while connecting the IRIS studio. However, executes Write ##class(%File).DirectoryExists("c:\intersystems\irishealthcomm\mgr\hscustom")returns true and terminal and SMP works

thanks!

Hey Developers,

Enjoy the new video on InterSystems Developers YouTube from our Tech Video Challenge:

⏯ Message integration with Google Chat

I am receiving a FHIR response bundle back with a resource of patient. Using fromDao, I attempted to take the stream and put it into FHIRModel.R4.Patient but it is not mapping correctly. When I attempt to take FHIRModel.R4.Patient and write it out using toString(), all I am seeing is the resource

{"resourceType":"Patient"}

so the response is not mapping correctly to FHIRModel.R4.Patient. How have others handled this? Do I need to translate it to an SDA since it does fit the model format?

HealthShare Unified Care Record Fundamentals – In Person (Boston, MA)* July 28-August 1, 2025

*Please review the important prerequisite requirements for this class prior to  registering.

• Learn the architecture, configuration, and management of HealthShare Unified Care Record.
• This 5-day course teaches HealthShare Unified Care Record users and integrators the HealthShare Unified Care Record architecture and administration tasks.
• The course also includes how to install HealthShare Unified Care Record.

Hi,

In the business rule I want to send a message to the business operation if any of OBX:8 (Abnormal Flag) is set.

I tried foreach but could not found desire results. Below is the sample message:

Thanks

I am trying to get the value of a Submit button on a CSP object page.

<input type="Submit" value="Assign" name="action" id="action">

I tried getting it thru $GET(%Request.Data("action")), but it throws an Undefined error. Isnt $GET supposed to handle it if its undefined anyway?

How do I get the "value" of the button pushed when the form is set to POST?

Hi everyone,

I’ve set up a scheduled task in InterSystems IRIS to run every night at 2:00 AM, but it doesn’t seem to trigger consistently. Some nights it works as expected, but other times it just skips without any error in the logs.

The task is marked as enabled, and there are no conflicts in the Task Manager. I’ve double-checked the system time and time zone settings all looks fine.

Could it be a cache issue or something to do with system load?

Thanks!

Hey Community,

We're pleased to invite all the developers to the upcoming kick-off webinar for the InterSystems Developer Tools Contest!

Date & Time: Monday, July 14 – 11 am EDT | 5 pm CEST  

When accessing management portal through IIS the page is not fully rendered and the buttons/links that are displayed don't work.

Management Portal works fine through private web-server.

Have just set up IIS/CSP Gateway to access Ensemble, and accessing the CSP Gateway configuration pages through IIS works fine (screenshot at end of post).

This is the view when accessing management portal through IIS (port 80) - missing images, links don't work, not all content displayed:

And this is the (top of the) view when accessing through the PWS (port 57772):

I've been following @Kyle.

Do not let the title of this article confuse you; we are not planning to take the InterSystems staff out to a fine Italian restaurant. Instead, this article will cover the principles of working with date and time data types in IRIS. When we use these data types, we should be aware of three different conversion issues:

1. Converting between internal and ODBC formats.
2. Converting between local time, UTC, and Posix time.
3. Converting to and from various date display formats.

You've probably encountered the terms Data Lake, Data Warehouse, and Data Fabric everywhere over the last 10-15 years. Everything can be solved with one of these three things, or a combination of them ( here and here are a couple of articles from our official website in case you have any doubts about what each of these terms means).

Developing with InterSystems Objects and SQL – Virtual July 28-August 1, 2025

• This 5-day course teaches programmers how to use the tools and techniques within the InterSystems® development environment.
• Students develop a database application using object-oriented design, building different types of IRIS classes.
  
  • They learn how to store and retrieve data using Objects or SQL, and decide which approach is best for different use cases.

Hey Community!

Here's the recap of the final half-day of the InterSystems Ready 2025! It was the last chance to see everyone and say farewell until next time.

It was a warm and energetic closing, with great conversations, smiles, and unforgettable memories!

The final Ready 2025 moment with our amazing team!

I have built a REST operation to submit a JSON Request Body, and in the JSON Response Object, I need to pull out certain values like pureID, portalURL, and under the identifiers array the ClassifiedID that has a term."en_US" = "Scopus Author ID"

{
    "count": 1,
    "pageInformation": {
        "offset": 0,
        "size": 10
    },
    "items": [
        {
            "pureId": 0000000000000,
            "uuid": "xxxxxxxxxxxxxxxxxxxxx",
            "createdBy": "root",
            "createdDate": "2024-11-18T22:01:07.

Hello again,

We are still seeking feedback on our two new HealthShare Unified Care Record certification exam designs. This is your opportunity to tell us what knowledge, skills, and abilities are important for Certified HealthShare Unified Care Record Specialists.

The feedback surveys are open until July 20th, 2025. All participants are eligible to receive 7000 Global Masters points for each survey they complete!

Interested in sharing your opinions? See the original post for more details on how to weigh-in on the exam topics.

In IRIS, every time a request need to be processed, a specific IRIS process (IRISDB.EXE) need to be assigned to handle that request.

If there is no spare IRIS process at that time, process will need to be created (and later destroyed). On some Windows systems (especially with security/antimalware solutions being active) creating new processes can be slow, which can results in delays during peak times (due to inrush of requests).

1. I like the Application Error Log functionality a lot. However, it becomes time consuming to inspect it date by date and directory by directory on a multidirectory server. Ideally, I would use an existing error class to write a custom error report by date, selected namespaces, etc. Does such a system class actually exist? Not that I found. The detail level on the screenshot below is enough.  
2. Some Application Error Logs go back a couple of years and load for a long while. Is there any programmatic way to clean them?

Hi Community

I'm working on a complex piece of rules that needs to check each OBX and evaluate if 3 of the fields match certain criteria. I've tried to achieve this using a Foreach loop, which does work, however it is not as clean as I wanted it. I was hoping I could assign temp variables inside the foreach loop to make the rules more easier to read, for example @testCode @resultText. This is not support as you can only assign inside a when condition. Before I raise this as an idea, i wondered if there was an alternative way to achieve the same thing?

I am seeking work with InterSystems HealthConnect/Cache. My experience is working with Rules and DTLs, plus message search, and export of components.With 10 years of dedicated expertise in SOA and ESB platform development, I have successfully designed and implemented enterprise-level integration solutions for large organizations, driving significant improvements in system interoperability and business efficiency.I have actively developed and supported HL7 V2/V3 、FHIR、XML/JSON interfaces.I reside in China. Available for full-time or contract positions, with remote work options preferred.

I seem to remember making this work before, but I'm not having any luck digging up examples.

I've defined some custom properties for a business operation that could definitely benefit from having popup descriptions available in the Production Configuration. I have triple-slash comments before each property that do just that in the source. I thought those provided the text for the popup descriptions when clicking on the property name, but apparently not.

Any thoughts?