Hello Community,

We have two live servers running DeepSee dashboards for users.  One of the servers can print a widget to a pdf file, and the other can't.  

I learned that 1) a Java JRE needed to be installed on the second server, and 2) it's trying to run an OS command to render a pdf file (details below).

An audit log of the event shows this:

We are currently implementing the Data Innovations Instrument Manager product.  In setting up our backup process we are wanting to use Veam snapshots. The application runs in a Caché 2016.1/Windows Server 2016 instance.  We are running an HA primary/secondary/arbiter config. The statement below is from DI.  I am curious to see what others that have implemented the DI Instrument Manager in the same or similar config have in place for backup.

"DI recommends is recommending that we not perform snapshots, but if you do choose to do so, here is some important information to consider.

Hi There

I've created a new WebClient using Studio Addon-s Soap Wizard. 

I've tried to send a soap request using  InvokeMethod.

However the Body comes empty   <soapenv:Body></soapenv:Body>

I needed it to be 

   <soapenv:Body>
      <ns:Ping/>
   </soapenv:Body>
 

I am sending a PUT FHIR message for a CodeSystem Resource using the defailt Service and server that was installed when I installed the FHIR on the NameSpace.

When I try to use the FHIR Request "id" property it is empty; e.g. pFHIRRequest.id is EMPTY. I really need to get this value, how can I get it?

I added a trace ion both the HS.FHIR.Service and HS.FHIR.Server.Process, details to follow:

The trace in HS.FHIR.Service is as follows, this is inside the OnProcessInput where the Id is validated I added the "else", it prints the line in the "else" and the result is an EMPTY input.

Hi Developers!

Those who use Dockerfile to work with InterSystems IRIS often need to execute several lines of ObjectScript.  For me, this was a game of "escaping this and that" every time just to shoot a few commands on ObjectScript to IRIS. Ideally, I'd prefer to code ObjectScript without any quotes and escaping.

Recently I found a nice "hack" on how this could be improved to exactly this state. I got this from @Dmitry Maslennikov's repo and this lets you use Objectscript in a way as you would type it in IRIS terminal.

Here is what you have in dockerfile:

///
COPY irissession.sh /
SHELL ["/irissession.sh"]
RUN \
  do $SYSTEM.OBJ.Load("Installer.cls", "ck") \
  set sc = ##class(App.Installer).setup()
# bringing the standard shell back
SHELL ["/bin/bash", "-c"]
CMD [ "-l", "/usr/irissys/mgr/messages.log" ]
///

InterSystems has corrected several critical defects that can result in data integrity issues. These defects were identified and corrected within a short time, so InterSystems has simplified the upgrade process by consolidating them into a single package. The effects of encountering these defects may not always be visible. These defects affect InterSystems IRIS, IRIS for Health, Health Connect, Caché, Ensemble, and HealthShare products. All of these defects relate to the application of journal data.

InterSystems recommends that you review this document.

Dear Community,

We're pleased to invite you to the InterSystems DACH Symposium 2019, which will take place from November 12th to 14th 2019 at The Westin Grand Hotel in Frankfurt am Main!

This year, we will focus on best practices and use cases for AI, ML as well as API management, microservices and the use of containers for DevOps. 

You’ll experience exciting lectures, interactive sessions and hands-on coding exercises, which are suitable for both InterSystems experts and beginners.

I have a custom written date, setup as myDate in my application, which always behaved fine for years, and now it's acting a little weird. 

When I run SQL in Display mode the date shows as 1/10/1841 for some but not ALL rows.

When I run the same exact query in logical Mode the date shows normal format, in my case, for example 10/1/2019.  When the application is running is shows the incorrect date.  When I run the terminal session and open a ref point and ask to write a date is shows 10/1/2019, but I am expecting internal format here - 65287.   

I was wondering what is causing this issue.

Hi Developers,

The new video from Global Summit 2019 is already on InterSystems Developers YouTube:

⏯ Introduction to Kubernetes

How I can access identity column value in SqlComputeCode with property?
 

We have in DB two books, first is loaned because it has the Friend ID, and the other is in the shelf.

I execute a class query to get all loaned books:

    Query BooksLoaned() As %SQLQuery
    {
        SELECT *
        FROM Library.Book
        WHERE Friend IS NOT NULL
    }
 

Which I have tested throught the portal:

My task is to retrieve all the loaned books and return them in an array. Method code:

ClassMethod GetLoanedBooks() As %ArrayOfObjects
    {
        set booksRS = ##class(%ResultSet).%New("Library.Book,BooksLoaned")
        set rsStatus = booksRS.

Hi all, New user here. I have an instance of Google Cloud Iris Health Community Edition running and am logged in on terminal. I follow the instructions for Google Cloud IRIS Health Community Edition. How do I get to iris? iris status yields nothing, there is no /bin/iris and sudo docker ps -a shows no containers but there probably is a iris container somewhere on the instance?  'Visit the site' yields ERR_CONNECTION_REFUSED 

Hi Developers,

Here is a digest of the Developer Community videos on InterSystems Developers YouTube Channel in October 2019:

I would like to Compact globals in a database to free up space.   

I would begin the process on Saturday morning, but am concerned, due to the size, that it would not complete by Sunday evening.  I understand that the process is setup so that it can run with users on the system, however, as the advice indicates, this would not be ideal.

Can the process be stopped if it does not complete by the time you want/need it to?

Do you know how to guestimate how long the process would take?

This is the Freespace for the database in question.  There are 1047 globals of which one of them takes up 50%.

The 2019.3 versions of InterSystems IRIS, InterSystems IRIS for Health, and InterSystems IRIS Studio are now Generally Available!

These releases are available from the WRC Software Distribution site, with build number 2019.3.0.311.0.

InterSystems IRIS Data Platform 2019.3 has many new capabilities including:

• Support for InterSystems API Manager (IAM)
• Polyglot Extension (PeX) available for Java
• Java and .

The 2019.1.1 version of HealthShare Health Connect 2019.1.1 is now Generally Available!

This release includes maintenance updates in a number of areas, as described in the online documentation here.

It also includes two new features, described in the online documentation here:

• Support for InterSystems API Manager
• X12 Element Validation in Interoperability Productions
• In-Place Conversion from Ensemble - based Health Connect (version 15.03) to Intersystems IRIS - based Health Connect

The build number for these releases is 2019.1.1.612.0.

The 2019.1.1 versions of InterSystems IRIS and IRIS for Health are now Generally Available!

These are maintenance releases in the EM (Extended Maintenance) stream.  The changes are reflected in the 2019.1 documentation, which is available online and features a new look including a card-style TOC layout.

The build number for these releases is 2019.1.1.612.0.  A full set of kits and containers for both products are available from the WRC Software Distribution site, including community editions of InterSystems IRIS and IRIS for Health.

Caché  2018.1.3 and Ensemble 2018.1.3 maintenance releases are now available.   

Full product installation kits can be downloaded from the WRC Software Distribution site.

This is a maintenance release with many updates across a wide variety of areas.

For information about the corrections in this release, refer to the release notes.

This release also adds support for Red Hat Enterprise Linux 8, in addition to the previously supported platforms detailed in the 2018.1 Supported Platforms document.

 The build number for this release is 2018.1.3.414.0. 

Hello!  I have basic web services application that java clients connect to the cache web services.  Using the browser, the user enters in the following url.

http://localhost:57772/csp/foia/%25SOAP.WebServiceInvoke.cls?CLS=SOAPFoia.SOAPServiceFoiaWeb&OP=FoiaApp30
'

which runs a soap method called FoiaApp30.   I am not sure how to add https  security to the web service calls.  I have reviewed documentation pertaining configuring SST/TTL configuration and other information.   Can somebody please help me out on what I need to do?

Hi there

I've noticed extreme slowness using the portal in my Healthconnect dev enviroment lately.

Any page in the Portal takes a lot of time Loading.

Any ideas of what it could be?

Kind Regards,

Joao

All of the sudden, Cache Studio's Debug->Run command started to fail with error '6704 Target has exited debugger' (German: Kein Anbinden möglich). What could be a reason of that? Today we installed Cache Web Terminal (https://intersystems-community.github.io/webterminal/
), could it be possible that the terminal somehow hijacked some debugging api end-point?

Update: any idea what error 6704 means exactly? Studio was able to launch debugging job but it unexpectedly exited? German text seems is trying to say "Can't connect"

Hi Developers!

Here is the release of what's was enhanced and fixed in the DC engine in October 2019.

• New look-and-feel and features for the Developers Events;
• "Smart" social sharing in Twitter;
• 5 min delay before sending emails, nested tags for group tags, better articles linkage, and other small enhancements and bug fixes.

See the details below.

The Issue

I help support a legacy ZEN application that makes extensive use of the “dataGrid” component. The application reuses a ZEN page with a“dataGrid” for different views of similar data; depending on the view, the application hides or displays some of the columns of the “dataGrid”. The application does this client-side, setting the “hidden” property of the “columnDescriptor” true or false as needed.

Users have reported the following bug in the app: On views which hide a column, data in the other columns are shifted so as to appear under the wrong headers.

Hi,

Has anyone tried the  InterSystems IRIS for Health Community Edition on Azure

https://azuremarketplace.microsoft.com/en-us/marketplace/apps/intersystems.intersystems-iris-health-community
It seems the image is the InterSystems IRIS for Health image instead of the Community Edition.

Thanks,

Rui
 

I have a cube that lists services, processes, and operations information and wanted to make the names of the items more user-friendly to end users and to use a flag to determine which components would be displayed in the dashboard.

We created another table/cube that has a status flag (1/0) to determine whether we would look at the item, the existing name, and the human-readable name.

What is the best way to reference the data in the new cube from the original cube to use the human-readable name?

Thank you, LG

Hi Developers!

This is the digest of new solutions and applications submitted to InterSystems OpenExchange in October 2019!

New applications in October 2019

simplemirror by Mario Sanchez Macias

This is a very simple docker-compose with a simple class that creates a mirror. It will create 2 folders (mirrorA and mirrorB) with the Iris installation files and mirror database MIRRORDB. Also creates a namespace MIRRORNS.

objectscript-rest-docker-template by Evgeny Shvarov

Very simple template to start development REST API with for persistent data in IRIS using  Docker.

IRIS OAuth example by Dmitrii Kuznetsov

This is a template for InterSystems ObjectScript Github repository. The template goes also with a few files which let you immedietly compile your ObjecScript files in InterSystems IRIS Community Edition in a docker container

vscode-multi-connection by Dmitry Maslennikov

Example project, how to configure and use multiple connections in one namespace with VSCode-ObjectScript

iris-datatransform-unittest by Alberto Fuentes

IRIS Data Transform UnitTest Sample

SetEnv by Eduard Lebedyuk

Set Environment Variables

DocumentTemplate by Zenkov Artem

DocumentTemplate allows you to use ODT and DOCX files as templates for rendering reports or letters.

msgpack by Maks Atygaev

Implementation of MessagePack protocol where you need something more compact and speed then JSON. https://msgpack.org

Twitter Sentiment Analysis with IRIS by Amir Samary

Use IRIS Natural Language Processing and its interoperability capabilities to fetch realtime tweets and analyze their sentiment as well as their metadata.

Apache POI by Eduard Lebedyuk

ObjectScript part for apache-poi integration. Allows reading xlsx.

RabbitMQ adapter by Eduard Lebedyuk

InterSystems IRIS adapter for RabbitMQ

Greetings community. I would like to know how to migrate a BD in production to a local environment. When I have a system in production (BD Sql Server) what we do is mount a local copy to do the analysis with the data and not occupy resources of the system in production. My question is: How do you do it with Intersystems technology? I already tested the PowerBi connector and it looks great, but that's where the question came up.
 

Hi Everyone,

Please welcome the new Global Summit 2019 video on InterSystems Developers YouTube Channel:

⏯ InterSystems IRIS and Intel Optane Memory

Hi Everyone,

New Coding Talk, recorded by @Evgeny Shvarov, is already on InterSystems Developers YouTube:

GitHub Repository Template To Develop and Debug ObjectScript in InterSystems IRIS