Based on the successful solution for my 2nd contribution to the Contest 
I used an adapted version for this package. And have some findings I'd like to share.

Multiple communication steps over CPIPE may take time.
You won't recognize it on a fast machine. But a slower box with
Windows + Docker Desktop + your browser (and more) is neither
"Speedy Gonzales" nor a "Road Runner". 🙂

First observation you launch your OS command and see NO result
On the console, you just sit there and expect a reply.
Establishing the Connection to IRIS is a typical case.
Jour redirected Output is just empty.

Good day,

We recently had penetration testing conducted on our HealthShare clinical viewer and patient Index instances and below is the recommendation

1. Set a same-site cookie for identified CSPWSERVERID. Please advise where I can do this as I only saw this on web gateway settings and it has enable and disable options only.

2. Avoid the usage of session cookies as an Anti-CSRF Token on identified cookie IRISSessionToken. Please advise if this is used as a session as they mentioned that if it's not used as a session we can ignore their recommended remediation. I found that this is set under %CSP.

Hi Developers,

Watch this video to learn about the Bulk FHIR server and client and the latest version of our Bulk FHIR implementation:

⏯ Bulk FHIR Export @ Global Summit 2023

This question originally appeared in the comments of the post: Making Prometheus Monitoring for InterSystems IRIS and Caché
 

I am new to IRIS, I was setting up the monitoring referring to the above documentation. Please can you help me how can I compile the my.metrics class mentioned in the documentation through CLI in the Linux VM where I am not having studio setup. Could you help me please?

Hi everyone,

It could be great if some of you have had experience in hl7 v2 messages. The question is about FHIR to hl7 v2.5 conversion. I have to translate a binary resource, encoded in base64 into an orl_o22 message. Do you have advices? Which field could be used for that datatype? 
I have found some implementation using nte segment but it is limited in characters.

Thank you

Hello,

First of all thanks for your time reading this doubt.

We have discovered the following behaviour. Inside a Router we have a roule which needs to filter out the ADT_A08 messages which have not OBXs.

The legacy system had this rule implemented:

(((Document.{OBX(1).SetIDOBX}<"1")||((Document.{EVN:EventReasonCode}!="COD")&&(Document.{EVN:EventReasonCode}!="FIN")))

However we have tested it and it does not filter out the ADT_A08 messages.

Is there any way to express inside a Rule, that we need to discard ADT_A08 messages which have not OBXs?

I tried both the latest 32-bit and 64-bit Cache ODBC drivers, but I’m getting this “Message sequencing error” when I attempt to connect to the Cache server.  Client is a Windows Server 2022. Server is a 2008 version of Cache ( or customer thinks). I’ve tried a number of things without success.  If I enter invalid credentials I do get the quick “Access Denied” response.  But when I have the proper IP/port/namespace/credentials I consistently get this error below.  Google shows others struggle with that error, but no resolution.

Hello, I am going through the log files of my instance and I wanted to know what each part of it meant. I've tried going through the documentation but I wanted clarification.

I understand there is a log viewer, but I want to understand this directly through the text file. For example, if I were to read this-

"11/06/23-21:00:46:680 (444) 0 [Utility.Event] Performing Journal Recovery"

What would each part of this line be called? 

Thank you for your assistance.

InterSystems is pleased to announce the central component for InterSystems Supply Chain Orchestrator™, the 2023.1 release of InterSystems IRIS for Supply Chain, is now Generally Available (GA).

InterSystems Supply Chain Orchestrator is built on InterSystems IRIS®, our complete cloud-first data platform that enables a smart data fabric architecture to make it easier to build and deploy high-performance, machine learning-enabled applications that connect data and application silos.

Maybe anyone has a working example?

This is what I have tried: (like in the documentation)

I get no messages but tSC is:

tSC="0 "_$lb($lb(8104,"<GATEWAY> java.lang.OutOfMemoryError java.nio.Bits.reserveMemory(Unknown Source) Direct buffer memory",,,,,,,,$lb(,"USER",$lb("e^OnAsStatus+1^%Net.Remote.Exception.1^1","e^AsStatus+1^%Exception.AbstractException.1^1","e^ReceiveMessage+5^%External.Messaging.Client.

This question originally appeared in the comments of the post: [Video] InterSystems IRIS FHIR SQL Builder: Sneak Peek
 

Any chance the FHIR SQL Builder process could be automated? It'll help to refresh the SQL table so it'll be up to date!

Thanks

This question originally appeared in the comments of the post: InterSystems Data Platforms and performance - Part 5 Monitoring with SNMP
 

I tried monitoring iris with zabbix, SNMP from IRIS send to zabbix server, but on messages.log in iris appears many warning log like below,

11/18/23-21:04:31:507 (30326) 1 [Utility.Event] Unexpected error relating to fetch in TrakCare SNMP - <UNDEFINED>zSNMPFetch+110^websys.Indicators.1 *TCNS("1","3","1")
11/18/23-21:04:31:520 (30326) 1 [Utility.Event] Unexpected error relating to fetch in TrakCare SNMP - <UNDEFINED>zSNMPFetch+117^websys.Indicators.

Hello,

In response to the infrastructure needs of our company's service, I've created a small API that sends SNMP queries to InterSystems to visualize relevant data for retrieval when the infrastructure implements monitoring.

However, I'm experiencing a timeout issue when attempting to collect information using an SNMP walk. Here is the code for my API's SNMP service:

import snmp from"net-snmp";

const options = {
    port: 161,
    retries: 4,
    timeout: 3000,
    transport: "udp4", // Uniquement udp4 et udp6 possible
    trapPort: 162
};

const oids = [ "1.3.6.1.4.1.16563.4.1.15.1.

There are situations when your only access to a server is using a web browser,
and there is just no chance of a Terminal or Console access.
The Online Demo Server is such a case.

So you have WebTerminal. That's fine for ObjectScript and Embedded Python.

But my demo is straight Java. And is interactive.
$ZF(-100...) is some aproach. But it's rater batch-oriented and not interactive.
@Enrico Parisi  presented a nice extension to WebTerminal recently.
It's close to my own packageWebCommand that I presented a year ago.

They all act in the same

 I think WebTerminal is an outstanding project, kudos to @Nikita Savchenko 

One useful functionality is missing, the the ability to run Operating System (Linux or Windows) commands.
In many cases WebTerminal is used when access to the OS is difficult, so having the ability do run simple OS commands from WebTerminal would be a big advantage.
Using "normal" terminal, be it Windows IRIS console, Windows Telnet or within "iris session" in linux is simple, from the IRIS terminal prompt just precede the OS command with "$" or "!".
See the article "Terminal tip: Running OS-level commands" from @John.

I tried to monitoring IRIS with Zabbbix Server. Snmpwalk from Zabbix to IRIS success and got data from IRIS. But in message.log appears many warning message if snmpwalk running. 

11/18/23-21:04:31:507 (30326) 1 [Utility.Event] Unexpected error relating to fetch in TrakCare SNMP - <UNDEFINED>zSNMPFetch+110^websys.Indicators.1 *TCNS("1","3","1")
11/18/23-21:04:31:520 (30326) 1 [Utility.Event] Unexpected error relating to fetch in TrakCare SNMP - <UNDEFINED>zSNMPFetch+117^websys.Indicators.1 *TCNS("1","3","1")
11/18/23-21:04:31:533 (30326) 1 [Utility.

Good morning,

First of all we would like to thank you for your time reading, thinking and aswering this question.

We have been developing a Transformation to convert a source ORU_R01 to a target ORU_R01. For each OBX segment we need to check an if, and then, if it is true we just need to put this OBX and continue to the next iteration, otherwise, if it is false, we need to put (copy) the ORC + OBR + TQ1 before this OBX, and then put this OBX, and after that, the SPM.

We have been creating and testing two variants.

When using INSERT OR UPDATE command, 

How does the command know if the row exists? 

Can someone share some details for creating a  pipeline for converting CCDA (XML) document into Flatfile or CSV File using IRIS.

@Marc Mundt 
@David.M 
@Paul Lomayesva

Could you please help me out identifying the inbound and outbound adapters along with the DTL process for converting CCDA into CSV Files.

Thanks in  advance!!
Isabella

InterSystems FAQ rubric

A tool (^GLOBUFF utility) is available to check the database cache usage for each global variable.

You can run the utility directly or programmatically in the %SYS namespace.

Here's how to run the utility directly:

InterSystems FAQ rubric

You can set the maximum size of the IRISTemp database at IRIS startup by setting a configuration parameter called MaxIRISTempSizeAtStart.

After setting, the system will truncate IRISTemp to the set value (MB) at the next IRIS startup. If the current size is less than the specified MaxIRISTempSizeAtStart, no truncation will occur. Also, if 0 is specified, truncation will not be performed, so the size will start without changing. (Default) Settings are made from the menu below.

Is it possible to generate a random string in cache please advice thank you in advance

I am trying to execute a program from within cache using a $zf call

S X=$ZF(-1,"C:\""Program Files (x86)""\Car-Part\Messaging\iCPM.exe")

For the sake of this post I changed it to open notepad

S X=$ZF(-1,"C:\Windows\notepad.exe")

If I call it directly from terminal notepad opens and all is happy.  

If I add it to a program we use to run certain tasks once an hour or even every 10 minutes it will fire off notepad but it will be in the background.

The messaging application we use will not work at all in the background and needs to be in the foreground.

Prepare a Sample application

1. For this tutorial we will use the iris-rest-api-template (https://openexchange.intersystems.com/package/iris-rest-api-template), adding some code to install JIRISReport support. Do these steps:
2. Clone the project on a local folder:

$ git clone https://github.com/intersystems-community/iris-rest-api-template.git

3. Edit the file Dockerfile with this content:

ARG IMAGE=intersystemsdc/iris-community:2020.3.0.221.

InterSystems FAQ rubric

To run an online backup from a command you can use the API BACKUP^DBACK routine.
An example of performing a full backup is as follows.

set  status = $$ BACKUP ^DBACK( "" , "F" , "full backup" , "c:\backup\full.cbk" , "Y" , "c:\backup\full-log.log" , " NOINPUT" , "Y" , "Y" , "" , "" )

The return value is 1 if the backup is successful, and 0 if the backup is unsuccessful. Please refer to the log file for details on failure.

Additionally, you can specify C for the second argument TYPE to specify a cumulative backup, and specify I to specify a differential backup.

For anyone planning their 2024 calendars, I happened to see this on Facebook the other day.  

In my previous articles, I described my Command Line Extension to NativeAPI.
Of course, this is also available for any other NativeAPI package.
So I created this example as a demo for the actual Java Contest.

The package contains also an IRIS server in Docker for the demo
It is evident that it also works with any remote IRIS server.
You just have to provide it with my NativeAPI CommandLine Extension.

I think this demo is easy to follow and shows the essential features.

This is the related article to the package in Java Contest. 
I decided to present a CRUD++ Global Editor based on IRIS Native API for Java.
++ because it’s a little bit more than just Create, Read, Update, Delete
Visualization of a global is always important to review results immediately.

• For this purpose, I have extended the API with a Tree Viewer that mimics  ZWrite and allows also the examination of subtrees.
• A $Query Style Navigator Forward and Reverse operating for easy finding the Global node of interest.

InterSystems FAQ rubric

To create a user-defined error you need to prepare the XML that describes the error code and corresponding message that you want to use as a user-defined error.

Please set the error code as a negative integer.

<?xml version="1.0" encoding="UTF-8"?> 
<MsgFileLanguage="en"><MsgDomainDomain="UserErrors"><MessageId="-111"Name="MyError">An error has occured</Message> 
    <MessageId="-222"Name="MyError2">An error has occured 2</Message> 
  </MsgDomain></MsgFile>

Once the XML file is created, load it into the namespace you want to use.

Does anyone happen to know what could be causing this error?

ERREUR #5002:Erreur Caché : <LIST>%SerializeObject+5

^AHP.WebSrvExchange.Response.FicheRetourResponse.1