I have a Task that I am trying to write the output to a file. How do I check for if the Output File has been included in the Task Schedule, so I can direct my output of my class to that output file?

Thanks

Scott

I have a general question about HealthShare Provider Directory using Code Tables on disk vs Cache SQL Tables. Why is Provider Directory not using the Cache SQL Tables within the IRIS platform?

I am struggling with returning a SQL Query Result that may have multiple rows that can be searched.

 set query = "SELECT Facility FROM FROM osuwmc_EnterpriseDirDB.RelationshipMedCtrID WHERE OSUmedcenterID = ?"
 SET rset = ##class(%SQL.Statement).%New()
 SET qStatus = rset.%Prepare(query)
 SET rset = rset.%Execute($Get(ID))
 do rset.%Display()

I need to take the values that are returned and say search them for a single value. How would I go about returning the EnsLib.SQL.Snapshot into a Array or List for it to be searchable.

I was wondering if someone could help me. In the past I have been able to call external Stored Procedures through a SQL Outbound Connection and have them return me the EnsLib.SQL.Snapshot to use within a BPL to extract data.

But this time instead of using a SQL Outbound BO to make the Stored Procedure call, I decided to create a Linked Stored Procedure through the %JDBC_Server to point to the Stored Procedure out on MS SQL.

However, I am struggling to get the code just right to return the Column value from the Linked Stored Procedure.

 set result = ##class(EnsLib.SQL.Snapshot).

I have a segment within a Group (grp) that needs to be validated that it is populated within the message. 

When you use a Foreach within a Business Rule how should you account for the counter in the group?

For example, Epic sends their MFN message in the following format.

MSH~MFI~[~{~MFE~STF~PRA~[~ZPR~]~[~ZLK~]~[~CER~]~[~ZMG~]~[~ZTF~]~[~ZGP~]~[~ZDD~]~}~]

so, the ZLK segment might not exist until the last MFEgrp that is in the message. I need to verify if there is an Employee ID associated with the Provider in the HL7 message before I run it through the translation.

Trying to start investigating an error we are seeing with multiple of the same messages getting sent to the same vendor. We receive an HL7 message with an RTF embedded from our EMR, send it through a DTL to just update the Patient Class, and then send it onto the Operation which is TCP.

We are starting to see this error message...

ERROR <Ens>ErrBPTerminated: Terminating BP DocOutRptRouting3M360 # due to error: ERROR <Ens>ErrException: <INVALID OREF>zOutputToIOStream+6^EnsLib.HL7.Message.1 -- logged as '-' number - @''
> ERROR <Ens>ErrException: <INVALID OREF>zOutputToIOStream+6^EnsLib.

I was using VSCode to edit a DTL because it seemed easier to copy/paste code from parts of the DTL I was editing. I tried to add <sql> tag and code to call a SELECT statement, but when I compiled I got the following error...

ERROR <Ens>ErrInvalidDTL: Invalid DTL

  > ERROR #5490: Error running generator for method 'GetSourceDocType:osuwmc.Epic.MFN.DTL.EpicMFN949002Normalization'

ERROR: Ens.DataTransformDTL.cls(GetSourceDocType) of generated code compiling subclass 'osuwmc.Epic.MFN.DTL.EpicMFN949002Normalization'

    > ERROR #5030: An error occurred while compiling class 'osuwmc.Epic.MFN.

My query that I am running on my Custom SQL Inbound Service has columns that are larger than the typical string length. How do I enlarge the SQL Snapshot Column limitations 

Class osuwmc.Epic.Clarity.

I have the need to query an external database and write the result set/snapshot to an internal %Persistent [ DdlAllowed ] table that I built. I have built inbound SQL Services before and write them externally to replace SSIS jobs, but how would querying a database via a Service and writing the data to an internal table work?

Can I just take the inbound query structure and write it to the class file of the internal table in a DTL? If so, what would be the Target? Or does this need to be done within a BPL as a Code block?

I already mentioned in a Previous post I am trying to build a list from a repeatable field within a HL7 message. I figured out how to build the list by using a context list string variable within the Business Process (BPL) and doing a

do context.<variable>.Insert = <value>

 when I am looping through the field. I want to do it one step farther though... I want to search the list to see if the value exists before I do the insert. I only want to insert if the value is different than what is in the list already.

IF $LF(context.Facilities,##class(Ens.Rule.FunctionSet).

I have a repeatable field within HL7 that I want to create a List from. Do I have to initialize the List by using $LB, or can I just use $LI to keep adding on to the end of the list as it is looping through the field?

Epic had changed some of their logic on their Incoming Radiology Results which now require an Ordering Provider even though it is supposed to account for it within the Epic Interface settings.

I was wondering if we are using a custom schema if there was a way to default a value into OBR:16 if it was not valued without having to modify all the DTL's for these Results.

Is there a way to set this via the schema editor or in the background so we don't have to create/update DTL's or create a custom TCP Operation Class??

Not sure there are many that connect to MS SQL to execute queries, stored procedures, etc, but our Healthsystem has many different MS SQL based databases we use within the Interoperability environment for various reasons.

With the push to moving from on-prem to the Cloud we ran into some difficulties with our SQL Gateway connections and knowing how to config them to use Microsoft Entra for Active Directory Authentication.

There are many articles out on the web, but there was not one that could give us the full answer to what we needed to do, and Microsoft wasn’t much help.

I am currently experiencing frustration with trying to Authenticate an Active Directory account through JDBC as the Hospital System moves from OnPrem SQL Server to using Azure SQL Server with Microsoft Entra Authentication.

Microsoft cannot give me a straight answer of what is required from a JDBC standpoint to authenticate from a Linux environment.

I am working with WRC, but we are both struggling to find the specific answer for JDBC. If I use my local desktop and JDBC to connect through DBeaver I don't have an issue.

We connect to MS SQL Databases using the Microsoft JDBC Driver 12.2 using the following URL

jdbc:sqlserver://<server>:<port>;database=<database name>;trustServerCertificate=true;integratedSecurity=true;authenticationScheme=NTLM;domain=osumc;authentication=NotSpecified

They want to migrate the databases to the Azure Cloud and in doing so we need the Authentication to change to go through Microsoft Entra.

I have a query that returns around 6000 records that I need to go through and update another MS SQL Table. I would like to execute this once a day.How do you set MaxRowsToGet on a EnsLib.SQL.InboundAdapter service?

Thanks

Scott

I am attempting to create a Foreign Server/Table so I can pull some information in from MS SQL server via JDBC connection, but as soon as I create the Server/Table and logout the Foreign Server disappears.

CREATE FOREIGN SERVER Epic.Clarity 
   FOREIGN DATA WRAPPER JDBC CONNECTION 'MS-EpicClarity'

logout, then run 

the documentation - Defining Foreign Tables | Using InterSystems SQL | InterSystems IRIS Data Platform 2024.3 mentions "A user that creates a foreign server must have the %MANAGE_FOREIGN_SERVER administrative privilege" but I am not finding that security setting to give to my role.

First time trying to use Foreign Tables/Servers instead of Linked Tables...

Within the SQL Editor inside of the Managment Portal, or connecting through DBeaver JDBC how we can see what Foreign Servers have been defined? Is there a way to query and verify structure of the Foreign Server connection to know that we are building the correct Foreign Tables?

I attempted to create my first Foreign table but it failed when I tried to query the tables because it said the table could not be found. But when I sign into the Database via SQL Management Studio, I can see the table.

I am using a JDBC connection to MS SQL server to execute a stored procedure to select data and bring it into InterSystems as a EnsLib.SQL.Snapshot. I loop through the EnsLib.SQL.Snapshot using a while loop, but I also want to iterate through the Columns within that Row to do logic.

Is there a way to iterate through the Columns of the current Row of the EnsLib.SQL.Snapshot so I can apply logic/rules for further processing?

Thanks

Scott

Who do we report Documentation issues to?

Since moving to the new format, when searching for things within the documentation I get a blank screen with no results.

When I type in my search criteria, I can see it trying to find results but does not return results.

This does not seem like it is limited to a certain Web Browser, as I have seen this happen in Chrome and Edge

Thanks

Scott

There are a select few in the group that have been using Github as a Local Client push to a Repository setup in GitHub. Questions were brought up today about the security, and possible issues when it comes to data being pushed in this method.

Looking over code we have noticed that there is Histogram data within some of the class files that could be considered a security issue. Does anyone else have concerns with the Histogram data being within the class files pushed up to github?

Our TEST environment and PROD environment are on two different versions of HealthShare Health Connect.

I have been trying to track down an issue we are seeing in our TEST environment with Memory usage.

We have Several BP's for years now that take a HL7 message, parse it apart, and make calls to a Custom EnsLib.SQL.OutboundAdapter to have it execute Insert/Select/Update/Delete stored procedures against a MS SQL Database via JDBC connection. We are using Microsoft's JDBC 12.2 driver to do this.

What we are seeing is that IRIS.WorkQueue globals are being defined for these calls but then the IRIS.WorkQueue is not being cleaned up and taking up large amounts of Memory.

I am trying to track down a problem we saw this morning with our TEST environment. We had a momentary issue where InterSystems HealthShare Health Connect could not connect correctly to LDAP. When we tried to login and could not connect to LDAP, the system would Delete our users.

the Test LDAP function would return a "Can't contact LDAP server". I went through the Certificates, made sure they had the correct permissions and were not expired.

I am still trying to understand and come up with a use case to use FHIR as an enhancement to our existing HL7 messages. Does anyone have an example of taking a FHIR response and transforming it into a SDA?

How does the workflow go? Does it go through 1 BP? 

Thanks

Scott

Currently we are exploring how we can allocate additional disk space to our current environment as we have seen a significant increase in growth of our Database files. Currently we have 3 namespaces, all with 1 IRIS.dat each that contains both the Global and Routines.

Since we have started down the route of everything within a single IRIS.dat file for each namespace, is it logical as we see growth to be able to split the current IRIS.dat for each namespace into a separate IRIS.dat for global and a IRIS.dat with for routines for each namespace in a Mirror environment?

I am trying to create a HS.FHIR.DTL.vR4.Model.Resource.Encounter message based on a conversion of HS.FHIRServer.Interop.Response QuickStream to a JSON %Dynamic Object. 

When I try to send the HS.FHIR.DTL.vR4.Model.Resource.Encounter onto the Router

1. it is not showing up as a Defined Message Class to Route the message back to the SourceConfigName of the Request message that initialized the FHIR query
2. I keep getting "ERROR <Ens>ErrBPTerminated: Terminating BP EPIC.FHIR.Process # due to error: ERROR #5002: ObjectScript error: <SUBSCRIPT>%SaveData+29 ^Ens.MessageHeader.1 ^Ens.

I thought I knew how to return a Response from a Business Process back to the Source Config Name, but I guess not. 

I am working on a Proof of Concept, that the Request Message Class would determine a "Route" within a Business Process to make a FHIR call (search, read) to our External FHIR repository, and return back the HS.FHIR.DTL.vR4.Model.Resource.xxxxxxx as a Response to the Source Config Name.

I have the FHIR part working, however now that I have the data in the form of HS.FHIR.DTL.vR4.Model.Resource.

Instead of building a BP to execute stored procedures just to insert the data, I figured I would give Linked Stored Procedures a try since all I need to do is insert the data. I have proved in our MS SQL Development environment that it is possible, so I through I could just repoint the Linked Stored Procedure 

set hdbc=$$GetJConnection^%apiGTW("xxxxx")

to the test environment. But when I made the changed in VSCode and compiled the Stored Procedure disappeared from the SQL view in the Management Portal.

So can we not simply update the connection string to point to a different MS SQL Connection?

I was looking for an easier way to build the FHIR Query String, given the Record Map request that is passed into the DTL.

I built this Function, but when I run a message through it, my Query String that is passed back into the DTL is a Reference Pointer and not the String I am looking for.