New post

#HL7

9

Health Level-7 or HL7 refers to a set of international standards for the transfer of clinical and administrative data between software applications used by various healthcare providers

Learn more

Hi,

We're having an issue with some messages being sent to a downstream system from Healthshare. Part of the free text in the NTE segment is displaying with special characters on the system front-end but is not present in the HL7 message that we send to them. We are guessing that this is a result of some of the text being copied and pasted from something like MS Word. The '?' on their system is just representing an invalid character.

Is anyone aware of a way to prevent this occurring? We are sending the messages using the 'cp1252' encoding.

1 2
1 26
Question
· Apr 18
HL7 DTL formatting

I need a DTL to handle this.

Any ideas appreciated.

For all Prosthetics orders:
when ORC-1(Order Control) is "NW" (New Order), need to update OBR-18(Placer Field 1) based on PV1-2 (Patient Class) value.
assumption is that the selection logic is that all prosthetics orders with OBR-18 field is always blank.
Description :
If PV1-2 is I, insert I in OBR-18
If PV1-2 is O, insert O in OBR-18
If PV1-2 is E, insert O in OBR-18
If PV1-2 is P, insert O in OBR-18
If PV1-2 is R, insert O in OBR-18
If PV1-2 is B, insert O in OBR-18

0 2
0 39
Question
· Apr 22
DTL help

New at DTL. I need some pointers on this DTL

For all Prosthetics orders:
when ORC-1(Order Control) is "NW" (New Order), need to update OBR-18(Placer Field 1) based on PV1-2 (Patient Class) value.
assumption is that the selection logic is that all prosthetics orders with OBR-18 field is always blank.
Description :
If PV1-2 is I, insert I in OBR-18
If PV1-2 is O, insert O in OBR-18
If PV1-2 is E, insert O in OBR-18
If PV1-2 is P, insert O in OBR-18
If PV1-2 is R, insert O in OBR-18
If PV1-2 is B, insert O in OBR-18

0 1
0 21

Hello Developers,

I have MacBook Pro M3 and I'm new to the IRIS for Health setup / installation with all pre-requisite / requirements so someone could please help me with detailed instructions on how to setup IRIS for Health (HL7 & FHIR) from scratch along with SQL Server? I have Windows 11 installed in parallel desktop if that's required and complete installation / setup is not possible on MacBook.

Thank you in advance.

Rushi

0 3
0 42

One of the pain points for maintaining HL7 interfaces is the need to run a reliable regression test upon deployment to new environments and after upgrades. The %UnitTest class allows unit tests to be created and packaged alongside interface code. Test data can also be maintained within the unit test class, allowing for quick and easily repeatable smoke-testing and regression testing.

Resources:

  • Standard %UnitTest class

Open Exchange app
13 1
1 275

I have a segment within a Group (grp) that needs to be validated that it is populated within the message.

When you use a Foreach within a Business Rule how should you account for the counter in the group?

For example, Epic sends their MFN message in the following format.

MSH~MFI~[~{~MFE~STF~PRA~[~ZPR~]~[~ZLK~]~[~CER~]~[~ZMG~]~[~ZTF~]~[~ZGP~]~[~ZDD~]~}~]

1 1
0 33

Hey Community,

Enjoy the new video on InterSystems Developers YouTube:

⏯ Introduction to OMOP Platform

https://www.youtube.com/embed/5O9J-tRQZM8
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

0 0
0 37

Trying to start investigating an error we are seeing with multiple of the same messages getting sent to the same vendor. We receive an HL7 message with an RTF embedded from our EMR, send it through a DTL to just update the Patient Class, and then send it onto the Operation which is TCP.

We are starting to see this error message...

0 4
0 52

Background:

This guideline provides an overview of how to design and implement a REST API interface for querying patient demographic data from an Electronic Patient Record (EPR) system using HealthConnect. The process involves sending a query request with the patient's identification number, retrieving the response from the EPR system, extracting the required patient demographic data from the HL7 message, and sending it as a JSON response to the supplier. The high-level process diagram is shown below (Screenshot 1).

4 5
1 98

We are receiving the report in text format and it has special characters like ', - like that in the text. Source system is using the UTF8 encoding format hence the text is showing as ' � ' . Is there a way to convert the utf8 to actual character in the DTL.

Thank you,

0 6
0 66

Is there a generic process for "walking" the structure of a virtual document - eg an HL7 message (EnsLib.HL7.Message) or an XML document (EnsLib.EDI.XML.Document).

At least we'd want to be able to visit all "nodes" (HL7 fields or sub-fields, XML nodes) in the virtual document and be able to work out/generate the Property Path (so we could call "GetValueAt").

We can just about come up with something generic for HL7, since it only nests down to 4 levels within each segment, though we're using numeric Property Path's at that point rather than symbolic ones (MSH:1.3 etc).

0 7
0 55

Hi,

My HL7 interface in production is outputting messages to a HL7 File Operation and a EnsLib.HL7.Operation.HTTPOperation. There is no errors in the File Operation, but the HL7 HTTPOperation is giving ERROR #5911: Character Set 'iso-8859-4' not installed, unable to perform character set translation. Both the HL7 File Operation and HL7 HTTP Operation are using latin1 for Default Char Encoding.

What is ERROR #5911 about? Is something missing in the IRIS installation?

1 5
0 61

Hello everyone,

I'm looking for a practical project guide to help me gain hands-on experience with InterSystems Ensemble HL7. Ideally, this guide would walk through building a small project — something that covers key concepts like message routing, transformations, and interoperability.

0 2
0 49

High-Performance Message Searching in Health Connect

The Problem

Have you ever tried to do a search in Message Viewer on a busy interface and had the query time out? This can become quite a problem as the amount of data increases. For context, the instance of Health Connect I am working with does roughly 155 million Message Headers per day with 21 day message retention. To try and help with search performance, we extended the built-in SearchTable with commonly used fields in hopes that indexing these fields would result in faster query times. Despite this, we still couldn't get some of these queries to finish at all.

17 0
6 83

I'm working on FHIR project and using this code to convert an incoming request to FHIR

Method OnRequest(request As HS.FHIRServer.Interop.Request, Output response As HS.FHIRServer.Interop.Response) As %Status

{

#dim tSC As %Status = $$$OK

Try {

// Process incoming request

set stream = ##class(HS.SDA3.QuickStream).%OpenId(request.QuickStreamId)

set bundle = ##class(HS.FHIR.DTL.vR4.Model.Resource.Bundle).FromJSON(stream,"vR4")

1 9
0 88

Hello,

I'm trying to add another segment to an HL7 MDM message. More specifically OBXgrp(1).OBX. The addition itself works,. When I look at the message in the trace, the segment with the content can be seen. However, it is not displayed as an OBX segment.

Build Map Status = 'ERROR <EnsEDI>ErrMapRequired: Missing required OBXgrp(1) element at segment 6'
'ERROR <EnsEDI>ErrMapSegUnrecog: Unrecognized Segment 6:'' found after segment 5 (TXA)'

0 2
0 56

We are using a DTL transformation to take HL7 and transform into custom XML (XML is a virtual document, held in an EnsLib.EDI.XML.Document object). The schema specifying the format of the XML says one element should occur no more than 24 times (maxOccurs="24" in the XSD schema). However, the transformation to produce one such element always produces 24 elements, all but the last one blank, when tested stand-alone.

0 1
0 63

Epic had changed some of their logic on their Incoming Radiology Results which now require an Ordering Provider even though it is supposed to account for it within the Epic Interface settings.

I was wondering if we are using a custom schema if there was a way to default a value into OBR:16 if it was not valued without having to modify all the DTL's for these Results.

Is there a way to set this via the schema editor or in the background so we don't have to create/update DTL's or create a custom TCP Operation Class??

0 1
0 43

Hello,

is it possible to kill/suppress hl7 message in the DTL (data transformation).

in cloverleaf, it is common practice to check the value in message, for example pv1:7.9. if the value is certain word(assigning authority) then send the message over to destination, if it is not, kill the message

how would this be done in InterSystems ? does that need to be done in the rule instead? or can it be done in the data transformation? if it can be done in data transformation, how can it be done?

Thanks

1 4
0 104