Okay, we've got a quite useful way to very easily Import and export our objects as JSON, similar to what we already had before for XML.

So, It's a %JSON.Adaptor. But the issue here I faced with, working with Stream properties.

I have an example, when I generate an object, with stream binary stream properties. Export and Import the same, but getting the different resulting objects, depends on the original size of streams.

0 6
1 1.5K

I have defined a class with a dynamic object property:

My class

The issue I encounter is that if a length of a serialized json property is more than 3641144 symbols, the object fails to save with the following error (either MAXSTRING or STRINGSTACK):

Length: 100 Result: OK
Length: 3641143 Result: OK
Length: 3641144 Result: OK
Length: 3641145 Result: ERROR #5002: ObjectScript error: <MAXSTRING>%GetSerial+1^%Library.DynamicAbstractObject.1
Length: 7282288 Result: ERROR #5002: ObjectScript error: <STRINGSTACK>%GetSerial+1^%Library.DynamicAbstractObject.1

Is there a workaround? I need to store moderately large jsons (10-15 Mb) and dynamic object properties allow for a very convenient access.

$ZSTORAGE is set to -1.

2 6
0 1.1K

Hi folks!

Researching FHIR bundle transactions.

The idea is that you can post a bundle to a FHIR server with a set of resources. And you can send it as a transaction, so only all the resources will be published or neither.

E.g. I send a bundle of two resources: patient and its observation.

The observation resource should reference an existing patient. But it probably doesn't exist yet on the server and goes within the same bundle.

For this purpose there is a way to have a temporary id in the bundle, to let resources reference ids.

0 6
0 476
Question
· Dec 19, 2016
HL7 Section to JSON

Hi all,

I'm trying to convert a HL7 section to a XML or JSON string.

We need to save the content of PID section into a SQL Column, therefore we need to convert it into a XML o JSON string

is there any easy way to convert it?

I've tried to convert it directly into a DTL, but all my attempts have been unsuccessful

Best regards,

Francisco Lopez

1 6
0 1.5K
Question
· Aug 22, 2016
$fromJSON and MAXSTRING

Hi, all.
I have CSP application and it needs to get and process data from ajax request with json-content. JSON can be very big.
In this case:
TRY
{
Set RequestObj = ##class(%Object).$fromJSON(%request.Content.Read())
} CATCH(Exception) {
Set Status=Exception.AsStatus()
}
I get just part of getting JSON and validate error in $fromJSON.
If I try to read it all in cycle:
TRY
{
While (%request.Content.AtEnd = 0) {

0 6
0 1.6K

Hi,

The class %JSON.Adaptor is very convenient,

I wonder if anyone faced the following scenario using it-

Exporting an object, that has a many to many relationship, and getting the details of the related objects.

For example, if we have three classes - Teachers, Students, and an intermediate class TeacherStudent .

The classes extend %JSON.Adaptor, and we would like to open a Student object, use %JSONExport, and get a JSON

That includes the details of the student and all the teachers that teach the student, something like:

0 6
0 561

Introduction

A REST API (Representational State Transfer) is an interface that allows different applications to communicate with each other through the HTTP protocol, using standard operations such as GET, POST, PUT, and DELETE. REST APIs are widely used in software development to expose services accessible by other applications, enabling integration between different systems.

71 6
4 400
Article
· Feb 18, 2021 2m read
Basic JSON Compare

Hi Dev Community

I thought i would share a little method I knocked together to traverse and compare 2 JSON objects for basic equivilance. I'm currently working on some data migration, and wanted a basic sanity check to validate that the JSON output is basically equivliant between the old and new, excluding a few things like timestamps.

It's a basic little recurvsive method, that will bubble up any differences over a nested structure. It's very low tech, as that's all I need it to do, but I thought it might be useful for others?

4 6
1 870

Hello everyone!
I have to build a REST service that receives a POST HTTP-request, collect a file from that request in the Form data and then send it in another HTTP Post request through Form Data. However I can't really seem to send the file, and I do not know where it has gone wrong. All I am getting told is that no file is being received from my HTTP Post request. I am reaching the REST Service I am supposed to send the request to, but nothing is being sent.

0 6
0 808
Article
· Sep 21, 2016 7m read
REST in Pieces

A beginners guide to develop Ensemble RESTful web services.

Background

Before you start reading this short introduction please go through the on-line documentation of Ensemble with special attention to chapter “Creating REST services and clients with Ensemble”.

The approach in the documentation is undisputable the fastest and easiest way to create RESTful services. As a beginner I went through the documentation and I had several questions. This short article is listing those questions plus my humble answers.

9 6
0 2.3K

Hello to my fellow Cache Gurus:

I ran into two issues with Cache to XML Export and Cache to JSON Export in regard to array sequences. So before I waste time opening a WRC ticket, I figured I would poll the Development Community, since there is always so much wonderful feedback and suggestions via this Developer Community! So much thanks in advance for everyone's input! Go Team!

0 6
0 224

I need to convert an array with an unknown number of indices to a JSON string for transmission (which is why it isn't possible to iterate through it using $ORDER). Does ObjectScript provide functionality to convert an array to a JSON string?

Edit 1: As Joel mentioned, the array is subscripted and has an arbitrary structure like:

a(1)="a"
a(3,4)="b"
a(3,6)="c"
a(5,6,7)="d"

which needs to be converted to

0 6
0 1.8K

I had a challenge recently where I was asked to parse and iterate JSON to find a patient that has a forename = "Bill" and try to make the function that iterates through the code re-usable.

Being working in Healthcare there isn't much experience or demand for parsing JSON, as most of my work is HL7.

I took this on using the documentation and worked out a way to parse the JSON (see posts below for code and source data).

0 6
0 445

We have JSON type data in a Dynamic Object. Is there a simple way to export / dump that data to a delimited string or file?

e.g.

Results={"ClassA":{"ClassName":"ClassA","ACount":367191880,"BCount":367191880,"CurrentDiff":0,"PreviousDiff":0,"ReportDate":"2024-03-02 00:00:00"}
"ClassB":{"ClassName":"ClassB","ACount":5352149227,"BCount":5352149227,"CurrentDiff":0,"PreviousDiff":0,"ReportDate":"2024-03-02 00:00:00"}}

0 6
0 407

I have the JSON message below. I am struggling with parsing the data in the OtherProcedures section. That section can be null, or have from one to many other procedures. Any help is greatly appreciated. I have tried using/setting an iterator to go thru the data but not having any success with that.

0 5
0 211

Background:

This guideline provides an overview of how to design and implement a REST API interface for querying patient demographic data from an Electronic Patient Record (EPR) system using HealthConnect. The process involves sending a query request with the patient's identification number, retrieving the response from the EPR system, extracting the required patient demographic data from the HL7 message, and sending it as a JSON response to the supplier. The high-level process diagram is shown below (Screenshot 1).

4 5
1 146
Question
· May 21, 2024
Join JSON responses

Good morning, 🙂

I would like to ask a question, which has to do with how to manage %GlobalCharacterStream representing JSONS.

Thank you for reading this question, thank you for your help, and thank you for your time and attention.

Specifically, in a certain Process, we were querying 2 Operations, whose response we were converting to a Property called "informesAutorizadosRangoFechas" (reportsAuthorizedInRangeDates) which is %GlobalCharacterStream whose content is a JSON with the same structure.

0 5
0 201