#InterSystems IRIS for Health

Hi,

i'm starting to try to switch to VS Code with ISC integration plugins.
Everything seems fine until i get to and environment with CCR enabled. I can't open any class in RW and i don't know how to check the class out.

Is it supported? What do i need to do to use it?

Thanks

Pietro

InterSystems IRIS Adaptive Analytics version 2023.2 is now available from the InterSystems Software Distribution site.  This new release brings along some great enhancements included with our partner AtScale's Version 2023.2 including:

• Increased object sharing across cubes to make virtual data model development easier
• A simplified way to create common, but complex, model elements like time-relative measures, intelligent dimensions, and calculation groups
• Improved connector for Microsoft PowerBI
• Built in usage metrics dashboard to manage aggregates and queries

If you hold the InterSystems HL7 Interface Specialist certification, you can potentially get recertified and have your certification expiration date extended by five years by beta testing our new InterSystems HL7 Interface Specialist Recertification project. The project includes hands-on exercises to validate core skills for developers who use InterSystems products to build and test HL7 v2.x productions. During the beta period, which extends until October 31, 2023, anyone who holds the credential is eligible to try the project, and the standard $150 fee is waived for candidates.

We are about to embark on a development where we'll be taking HL7 messages and generating PDF reports from them. We are wanting to future proof our development efforts within the constraints of our currently deployed platform and future upgrade options. We are currently running on Ensemble 2018, though an upgrade to Iris is anticipated - at some indeterminate point in the future. We are aware of Zen Reports and InterSystems Reports (Logi) as technology options, but are also unclear on some details. A roadmap and guidance from those who've done this kind of thing before would be great!

I successfully setup a REST web application with JWT enabled, which is fantastic.  My next configuration 'challenge' is to add 2FA to this REST app.  First question first - is this possible with the OpenAPI generated /login?  The end goal is to build out a SPA (React) using /login for the JWT and adding the Auth bearer token for api calls.  I'd like to prevent the token generation until the 2FA is satisfied - or generate the token, but test if the 2FA is satisfied before allowing calls forward.  Hope that's clear.

InterSystems FAQ rubric

※Use this method if you want to compare databases that have been replicated using mirroring, shadowing, or some other mechanism.

You can use the DATACHECK utility to compare global variables. Please refer to the document below.
Overview of DataCheck [IRIS]

***

Routine comparisons use the system routine %RCMP or the Management Portal.

Below is how to use it in the Management Portal.

Hello,

I have a EnsLib.HL7.Operation.FTPOperation that uses SFTP protocol and public/private key to connect to an external vendor moveitcloud.

Issue: The vendor is planning to enable Multi Factor Authentication for this file transfer account.

Question: Have you configured a SFTP operation to use Multi factor Authentication? If not, is there another way?

Thank you,

I am working on my first REST operation to send a API Request to an internal server within our Network. I have finally got past the point of being able to connect using a SSL/TLS Configuration, but I am getting a ERROR <Ens>ErrHTTPStatus: Received non-OK status 403 from remote HTTP server: 'HTTP/1.1 403 Forbidden'.

Hi All,

We're doing our first babysteps with embedded Python and IRIS with an interoperability solution. We want to convert a CSV file to an Excel xlt file.

As service we've got a EnsLib.File.PassthroughService which picks up a csv file

As operation we've got a EnsLib.File.PassthroughOperation which writes the Excel file.

In the middle:

We've created an Business Process with an %Stream.GlobalCharacter in the Request and a %Stream.GlobalCharacter  in the Response.

Hi,

We have a global with 65 million entries. All we are doing is just iterating through each entry to find out the total no of entries. It is currently taking 110 minutes. Is this something normal? What can we do to speed up this process? Below is the program for just iterating each entry in the global.

s sub=" ,count=0
f{              
     s sub=$o(^YYY(sub)) q:sub=""
     s count= count +1
     }
     w!, "Total Count:"_ count
 

The 2023.2 releases of InterSystems IRIS Data Platform, InterSystems IRIS for Health, and InterSystems IRIS Studio are now Generally Available (GA).

RELEASE HIGHLIGHTS

2023.2 is a Continuous Delivery (CD) release. Many updates and enhancements have been added in 2023.2:

Private Web Server

Starting with this release:

InterSystems announces its seventh preview, as part of the developer preview program for the 2023.2 release.  This release will include InterSystems IRIS and InterSystems IRIS for Health.

Discontinuation of the Private Web Server (PWS)

A major topic in this release is the discontinuation of the Private Web Server (PWS) from the installers.  This feature has been announced since last year and it's removed from InterSystems installers, starting with this developer preview.

See this note in the documentation. Additional information related to this topic can be found here.

Recently I started moving some of our JDBC Gateway configurations over to using the Microsoft JDBC Gateway driver instead of using the jTDS open source driver. I have noticed since then that those Objects that are using Microsoft JDBC Driver are throwing a lot more errors than the jTDS driver ever did, which I can understand however I am puzzled that I keep running into an issue with the Java Gateway Service within the Interoperability engine.

InterSystems FAQ rubric

You can set individual error pages for the following Web Gateway error messages/system responses:

• server error
• server busy
• server unavailable
• server timeout
• connection closed

Settings are made on the Web Gateway Management screen ([Management Portal] > [System Administration] > [Configuration] > [Web Gateway Management] > [Configuration] > [Default Parameters]).

In the Error Page section of the Default Parameters menu, set the filename of the html page to display or the URL to redirect to when an error occurs.

Good morning,

first of all thank you for taking the time to read and answer this question.

Recently, since we have upgraded to HealtShare 2020, we experienced the fact that when opening in the Studio the Process (.bpl) and Transformation (.dtl) classes, it asks us to log in, i.e. username and password, almost every time we open a new Process or Transformation.

However, in previous versions, I think we had HealthShare 2016 or 2017 or 2018, and in it, you could log in from the Studio in Processes and Transformations, logging in 1 time only.

Hi Community,

Enjoy watching the new video on InterSystems Developers YouTube:

⏯ Introduction to InterSystems Products

InterSystems has corrected two defects.

The first defect can cause an ECP application server to hang. This defect is only relevant to ARM and IBM Power processors; it is present in version 2022.1.2 and 2022.1.3 of InterSystems IRIS®, InterSystems IRIS for Health™, and HealthShare® Health Connect. The correction is identified as DP-423661. The defect is addressed in all future versions. 

 Did you know that with InterSystems IRIS for Health™, you can create a FHIR Facade that enables healthcare apps to send and receive HL7® FHIR® data?
 Find out how in this learning path (3h 30m), which includes a hands-on exercise (20m).

This is a sample application that demonstrates how to use the InterSystems IRIS for Health FHIR Repository to build a FHIR Repository with OAuth2 authorization, the FHIR endpoint will be the resource server and Google OpenId will be the authorization server.

InterSystems FAQ rubric

You can search for a specific global variable in the journal file using the ByTimeReverseOrder query of the %SYS.Journal.File class and the List query of the %SYS.Journal.Record class.

The role of each query is as follows.

A) %SYS.Journal.File query of the ByTimeReverseOrder class

You can get the journal file name. Results are returned in descending order of journal file name. 

These two articles describe how to extend business components with additional properties:

1. https://community.intersystems.com/post/how-customize-ensemble-settings

2. https://community.intersystems.com/post/creating-custom-captions-intero…

I have one more question about drop-down editor. Is it possible to pass to its URL the value of another business component property, not just @productionId? Something like: 

Hello,

I want to add a couple of properties to a custom Transform class to give the user the ability to edit its properties directly in the Business Process visual editor. It can be easily done with other Production components, but I can't find in the documentation how to do the same with my Transform. Is it possible?

And another question is about how to use the 'aux' parameter of the DataTransform.Transform method if my component is non-visual?

Hi all,

I am using %Library.ResultSet to execute my query which I have something like this.
Query GetABC() As %SqlQuery [SqlProc]{

}

After I execute this query and a resultset it returns from this. Now What I want to know is the SQL statement which will have the values dynamically added into while execution.

I have been successfully able to transform hand-written medical test results documents to HL7 ORU_R01 v2.x, then to SDA, which will be trasformed to FHIR or C-CDA.
However, I have a category of documents which contains reference range in multiple date formats, which are measured for each gestation period. 
For example, below is one of the documents.
 

Analyte: HCG, Value: 1968, Unit: mlU/mL 

Reference Range:
Week of gestation: 3, Range: 5.8-71.2
Week of gestation: 4, Range: 9.5-750
Week of gestation: 5, Range: 217-7138
Week of gestation: 6, Range: 158-31795

FHIR has revolutionized the healthcare industry by providing a standardized data model for building healthcare applications and promoting data exchange between different healthcare systems. As the FHIR standard is based on modern API-driven approaches, making it more accessible to mobile and web developers. However, interacting with FHIR APIs can still be challenging especially when it comes to querying data using natural language.

When creating custom Business Hosts, it's often necessary to add properties to the class for additional settings that will be used in the initialization or operation of the host. The property name itself isn't always very descriptive, so it's an advantage to have a custom caption display with the field.

In Caché, it was fairly straightforward:

TEST> Set^CacheMsg("EnsColumns","en-us","<property name>") = "<caption>"

But It involves a bit more effort in IRIS ...

InterSystems FAQ rubric

Whether the value of a local variable is an OREF or not can be determined using $IsObject(). Let v be the variable you want to check,

$IsObject(v)=1// v is an OREF$IsObject(v)=0// v is not an OREF$IsObject(v)=-1// v is an OREF but does not point to a valid object

Note that $IsObject(v) will give an UNDEFINED error if v is undefined.

To avoid UNDEFINED errors, it is recommended to use $Get like this:

$IsObject($Get(v))

Visual Studio Code, like Atelier, connects to IRIS through the Web Server and a web service, unlike Studio that connect to the SuperServer port.

What about the VS Code terminal?  Does that open a shell with SSH or does it also use a web service?

In other words, does an IRIS developer using VS Code need direct access to the IRIS instance with SSH or the SuperServer port, in addition to the external or private web server to execute terminal commands?

Is that different with linux vs. Windows?

Hi All,

I am facing some issues. I am having a SQL query that is executed using %SQL.Statement ExecDirect() method. Now I want to convert it into Embedded SQL using &SQL().
But where clause is dynamic in my case and It may contain 3-4 clauses.

Hey everyone, 

Here we are again. New year, new contest, new project, old reasons.

Triple Slash is in the house!