I am attempting to configure an inbound service that utilizes the EnsLib.SOAP.GenericService class. This service receives HL7-v3 content wrapped in SOAP requests. Despite reading the documentation on configuring SOAP services, I am still confused.

In my current configuration item "Fr_Centrak_RTLS", I have ‘Enable Standard Requests’ checked, ‘Pool Size’ set to 0, and the port is unspecified.

I have also configured a web application with the following details:

I need to convert dd/mm/yyyy --> yyyymmdd

example

Input = 25/03/1988

expected Output = 19880325

Question for folks who have connected to an External FHIR repository outside of IRIS. Within the HS.FHIRServer.Interop.HTTPOperation there is not an option to include TLS or an OAuth authentication when connecting to an external Repository. So then how is that piece done if you need to Authenticate against an OAuth Server before you are able to access the data or call the Web Services/REST calls?

InterSystems FAQ rubric

After upgrading your system, you may receive the error below when you try to open the Management Portal:

ERROR #5001: Server version of object does not match version sent from the client: %ZEN.Component.vgroup

This error is caused by outdated information remaining in your browser's cache.

You can resolve the error by clearing your browser's cache.

Hi Guys,

I never ran a Compact & truncate process before and we do have a 4.6TB database with 1.9TB free space available that I would like to recover 

but when trying to compact first it did ask me to target in MBs and not sure what this is, does it mean that I need enough space to move all my 4.6TB database to ? and given that system is running live does the Compact or Truncate process stop or affect our system from been used from our clients and any idea how long such process would take to finish (minutes or hours) ?  

Thanks

Hi Guys,

My Cache.dat has a expanded a lot and some globals occupy a lot of disc space with just junk data so I would like to kill some globals and shrink the cache.dat file because I'm running out of disk space?
So is there a way to do that without having to do it through the Truncate & Compact databases?

Thanks  

#Mapping
@Jenna Makin 
@Ashok Kumar T 
@AndreClaude Gendron 
@Saul Bloom 
@Anthony Filaski
Folks,

Hi Guy,

Made a fresh new Install of our currently working application from our current server to a new one but when trying to run the application in the new server it raises a page not found error:

this is the web application setup

Not sure what I'm missing? 

Hi

I've installed Ensemble 2018 then enabled IIS from Win features, then realized that CSPGateway doesn't exit so I downloaded and installed CSPGateway-2018 from WRC.

so now I'm trying to set up a Website application and facing some issues, and I think IIS and CSPGateway in inetpub are not connecting or synchronising properly but mostly is accessing Web gateway via IIS my understanding is that I can access using the following url http://machinename/csp/bin/Systems/Module.cxw  using my machinename or IP but it's not happening.

Is there a way to exclude specific members from a class when exporting to an XML or UDL file? Bonus question: is there a way to import from that file without overwriting those members that were excluded?

The use case is to export an interoperability production class without the ProductionDefinition XDATA. We plan to source control the production items through the Ensemble Deployment Manager, but we still need to export any custom code in the class definition itself.

I am receiving an XML input to my router and in the routing rule I need to traverse through the xml data , apply a for loop and fetch data.

How can I do that ?

Input :

<?xml version="1.0" encoding="UTF-8"?>
<Input>
   <data>
      <Ids>
         <Id>
            <Type>A</Type>
            <Value>123</Value>
         </Id>
         <Id>
            <Type>B</Type>
            <Value>456</Value>
         </Id>
      </Ids>
   </data>
</Input>

I would like to read 123 from above xml in a rule ..

Hi,

In Ensemble we have a http service that need to handle various ISO200022 xml structures .
We would want to use the Virtual Document message structures to pass this xml document on to the reset of the Production for processing. 

Hi,

Is there anyway available to get the current status of Write Daemon through code?

Generally, this information is present in Management Portal->System Operation->System Dashboard->System Usage->Write Daemon.

Thanks & Regards,

Syed

got below error

15:58:02.702:Ens.Director: ERROR <Ens>ErrProductionNotShutdownCleanly: Production

InterSystems FAQ rubric

For naming conventions, please check the respective document pages below.

About table name (class name): Identifier rules and guidelines - classes

About column names (property names): Identifier rules and guidelines - class members

As stated here, only alphanumeric characters and characters with Unicode code points larger than ASCII 128 can be used in column names (property names).

We are upgrading to Iris for Healthshare 2024.1.  When resending HL7 (resend and edit), the new message displays with a blank line in between each line of text.  In order to resend the message successfully, these blank lines need to be deleted.  Is this a setting, a bug or new functionality?  Is there a way to remove this functionality?

How can I  extract the sub-string before the last occurance of a delimeter in a string.

string = "aaDtext1Dtext2"

Delimeter = D

answer I need = aaDtext1

Hello everyone, I need some help. 

I have to send some events for a government WebService that I already imported the WSDL and XSD's and It worked fine and I'm able to build the message and connect into the service, but It has been rejected with the message that the XML is wrong and the only diference between the Caché SOAP message to all the examples that the government gave us is the header:
   

This is how the Government is expecting the message:

Hi! I am planning to move my Arbiter from a Unix server to a container(again on linux). To do this, I need the ISCAgent tar.gz file to configure Arbiter for our mirrored servers. I have tried searching for it on the Intersystems help forums but couldn't find it. Is it possible for someone to redirect me to the correct website to download it?

Thank you in advance!!

InterSystems FAQ rubric

When you run a routine in the terminal and an error occurs in the program, if you have not set the error trap properly, the program will enter debug mode as shown below.

USER>do^error1
 write A
^
a+2^error1 *A
USER 2d0>

From this state, enter the Quit command to return to the state before the routine was started.

USER 2d0>Quit

If a transaction is being processed within the routine where the error occurred, a prompt similar to the one below will appear.

USER>do^error1
 write A
^
a+3^error1 *A
TL1:USER 2d0>q
TL1:USER>

Hi everyone.

I have a function that may end up being called from a number of transformations at the same time, and within the function there's some Embedded SQL to first check if a local table has an entry, and then adds the entry if it doesn't exist.

To prevent a race condition where the function is called by two transformations and they both end up attempting to insert the same value, I'm looking to use the table hint "WITH TABLOCK" on the insert, but this seems to be failing the syntax checks within vscode.

Are table hints supported with embedded sql?

Hi, 

I'm currently working on configuring an Ens.Alert component within Ensemble 2018, and I'm looking to set up a system default settings for it.

Could anyone guide me through the process of setting up these default setting for the Ens.Alert component?  

Thank you in advance!

Can you assign the SessionId to a target field in a DTL. There is a %Ensemble("SessionId") variable that looks like it would be available to use.

@Vicky Li 
@Thanongsak Chamung 
@Warlin Garcia 
@Eduard Lebedyuk 
@Enrico Parisi 
@Luis Angel Pérez Ramos 
We are getting this error. All the drivers, URL and credential are tested and existed. it works fine sometime but also getting this error more often. Please advise the root cause and its respective solution. The business service that is using out of the box Java service (classname: EnsLib.JavaGateway.Service adapter classname: EnsLib.JavaGateway.ServiceAdapter) is throwing this error.
The configured "SOMEDSN" has passed the JDBC Connection test successfully with the external database (ORACLE)
Type: Error

Hi Guys,

I'm trying both of these methods to get a JWT token but none is working for some reason and not sure what I'm missing?

it works when I tested it from Postman 

Thanks

I'm facing an issue while converting an ORU_R01 HL7 message to XML, specifically with the <pidgrpgrp> kind elements. When I use the getvalueat() method before conversion, the XML includes the <pidgrpgrp> and other <grp> elements, but when I don't use the getvalueat() method, the XML is generated without these <grp>elements.

I've attempted to debug the issue using zwrite on the HL7 message before and after calling getvalueat(). Before calling it, the content appears different, and after calling it, the content shows buildmap=1, etc.Please see the xml generated in 2 cases.

As a InterSystems HealthShare Developer, you will be a part of an Agile team to build healthcare applications and implement new features while adhering to the best coding development standards.

Your key responsibilities include:

InterSystems FAQ rubric

If the journal file is too large to be searched or filtered using the Management Portal, you can refer to it using the following two methods.

① How to use the ^JRNDUMP utility
② How to reference it in a program

================================================== ========== 

① Using the ^JRNDUMP utility. For example, if you want to select all records in the journal file that include the global reference ^ABC, do the following:

*Please execute all commands below in the %SYS namespace.

DO SELECT^JRNDUMP("C:\MyCache\mgr\journal\YYYYMMDD.001","","","^ABC",1)

Hi, 

I'm trying to send alerts in Ens.Alert process to a teams channel. 

I have already created a production that transforms the incoming alerts and send to a set of user's email but I also wanted to sent it to the teams channel

Any thoughts around this?

Hi Guys,

Any Idea on how can make a dynaTree with 4 levels hierarchy (attached), I'm using the below code but sometimes works and other cases it doesn't?