I have a Business Service that reads a file from a folder and sends it as a string to a Business Process. In the business process, I need to add a string to the end of the file string that is coming into the Business Process. I am trying to do this in object script in studio and I am struggling to figure out how to add the string to the end of the other string. I am still new to studio and object script I have been reading up on the documentation and I am not sure what is the best way to accomplish this.

0 6
0 169

There is a major  opportunity in South Africa for a complex WMS solution.

We have a long standing production warehouse management system, we need to partner with an organisation that has track record of such implementation in the past two (2) years.

 

Are there any partners out there that might be interested in a Joint Venture ?

0 1
0 252

Once a week we are attempting to load an XML file from Workday into a MS SQL table using JDBC and Store Procedures. There is approx 102999 records in this XML file. We are struggling with processing the entire file within a reason amount of time. We feed the XML through a BPL to then populate values in a stored procedure then call the stored procedure through a Business Operation. I have tried splitting out the Business Operations to make two calls, but we still continue to see an issue loading the XML into MS SQL.

0 4
0 126

New to Health Connect so please forgive me if this is a stupid question! Is there a specific error code returned when a user initiates an abort from the jobs tab of the business host? I want to be able to treat the Abort as Completed due to our complex business process. Currently, hitting abort just retries the message to the same business operation. Want I want to do is provide the error code used by the Abort (if there is one) and treat it as OK

Thanks in advance.

0 4
0 174

I have a handful of EnsLib.HL7.MessageRouter sending an HL7 message to a single Business Process (Ens.BusinessProcess).

In the OnRequest method, I am declaring pRequest as EnsLib.HL7.Message

What I need to do is determine which HL7 Router sent any given request to my BusinessProcess. 

To do this, I know that I need to fetch the SourceConfigName property from the Ens.MessageHeader of the Request, but I am not sure how (or if) I can fetch this data from within the OnRequest Method.

Does anyone have any pointers?

Bill Casey

0 2
0 111

I have a BPL Business process which always processes messages - mainly it waits for responses since downstream systems are seriously async.

I need to update this process.

Wwould the existing instances of this Business Process complete correctly after the update?

My BPL changes would result in:

  1. New S method in the Thread class
  2. New OnResponse method in the context class

Both changes are in the middle of the process, so there are S/OnResponse methods before and after my change.

0 4
0 81

Hi,

After cloning "http://github.com/intersystems/Samples-Integration-RedLights" sample code I imported sample production from /home/project/Samples-Integration-RedLights/data/EndStateProduction.xml file to my local system.

Now I am getting the error "ERROR #5021: Directory '\home\project\shared\Samples-Integration-RedLights\data\SampleFiles\' does not exist." in my service.  

While modifying the Directory path I am getting below error :

0 1
0 108

Hi! I am working on a project where I use record map to transform a flat file and split it into two output text file and in the future will need to split four output files.

I only want to use one  target business operations instead of multiple. Is there a way to set the output file and the target folder path in my business process class?

Any advice on how I can achieve this or is this possible? Thanks!

 

0 5
0 181

Hello All,

I am exploring Ens.Alert to generate alerts for Server exceptions.

I noticed that in the business operation, if you have your code inside try/catch and if your catch doesn't explicitly invoke $$$systemerror then Ens.Alert is not invoked.

Similarly, in the Business process if you have <catchall> then Ens.Alert is not invoked on error.  How can I invoke Ens.Alert from <catchall> ? 

0 3
0 99

Hi, I think it's a simple question this at the end of something fairly complex

I've a DTL to go to a target class in context 

I get the error CLASS DOES NOT callrequest=##class(context.ConnectDocumentRequest).%New()'

I attempted to add code to initate the context with 

set context.ConnectDocumentRequest =##class(Penn.EDT.Messages.ConnectDocumentRequest).%New()

0 1
0 76

Hello,

I am trying to figure out if we can extend a business process in IRIS. My Use Case is that I am developing RESTful Interfaces and my each REST Interface needs to go through certain processes before getting to the actual action.  

e.g. I have 2 REST Interfaces, GetPatient and GetEncounter. Both of these need to invoke "GetToken" Business Operation to go to the Authentication server to get an authentication token before they go ahead and hit the Business Operation to Get the data i.e. Patient or Encounter.  

1 1
1 111

Does anyone know how to disable the auto-refresh in Healthshare, especially for Message viewer , Business process designer, DTL editor pages?  

These pages in management portal refresh every 15min( i.e. as per the session time out setting) . I tried to  set the following two configs to disable the auto refresh but both had no impact. 

set ^EnsPortal("DisableInactivityTimeout","Portal") = 1
set ^%SYS("Portal","EnableAutoRefresh") = 1

 

Thank you for your help. 

Mary

1 8
0 309
Question
Larry Pinsky · Jan 20, 2021
Multiple Threads In Operations

I have a BPL that calls a business service (actually does lots of other things unrelated to my question).  We receive an acknowledgement back containing data that is processed in the BPL and sent to the source system. The process of sending to our downstream system "A" and receiving the response takes about 20 seconds per transaction (very slow on system A's side).  Due to this slowness, we end up with a backlog close to 1000 messages by the end of the workday.

0 4
0 167
Question
Scott Roth · Jan 13, 2021
Handling Errors

I have a case where our EMR is sending data, but not all the values needed for the Ancillary are valued properly and causes that message to error/halt processing on the Ancillary system, not ideal but its what they do. I would expect them to still process the message except that 1 field, but they don't.

I want to add validation to make sure certain fields are valued correctly for the Vendor. 

So I add some statements to take those items that don't pass this validation out to a batch file with headers.

0 9
0 313

I have a case where I need to look up the NPI provider against an External MS SQL database to retrieve our Provider Identifier to send to a downstream system. In the past I would use a Business Process (BPL) to connect to the outside MS SQL via JDBC and get that information for me. But I was thinking instead of creating a BPL process to do this, would it be better just to link to the outside MS SQL database table to retrieve the information in a SQL statement within a DTL?

0 3
0 186

Did anyone run into this error when stopping a Production from Ens.Director?

Ens.Director::StopProduction => ERROR <Ens>ErrProductionNotQuiescent: IRIS can not become quiescent

It happens sporadically when an automated unit test from a class that extends %UnitTest.TestProduction runs a test on a Business Process. I already increased the parameter MAXWAIT to 30 seconds, but the error still happens.

0 4
0 212

Hello,

 

We would need to know the Ens.Response SourceConfigName to identify which Operation has raised an exception.

We have tried:

$$$LOGINFO("..%Process.%PrimaryResponseHeader.SourceConfigName..: "_..%Process.%PrimaryResponseHeader.SourceConfigName) //It outputs an empty string
 
$$$LOGINFO("response.SourceConfigName: "_response.SourceConfigName) //It generates an exception

 

We would need to get from an Ens.Response which body is null, its SourceConfigName:

0 2
0 190

Hello,

We are developing a BP where we would need to call at the same time to get appointments in two external systems. So then, we would need two threads, one for primary care appointments, and other for specialist appointments . We need to paralelize both calls because of both of them require some time and we would need to shorten it as much as possible.

 

We are currently using a flow:

0 3
0 172
Question
Larry Pinsky · Feb 28, 2020
SQLCODE Error -400

I have a code block in a BPL.  I have the below SQL and code.  All variables have been declared and set.  When I run the SQL, if there are no values returned, I get 100 for the value of SQLCODE when I perform the FETCH, which is correct.  If values are returned, I get a -400 error when I perform the first FETCH.  I've investigated, but cannot find the reason for a -400 error.  Hoping someone out here understands this and knows what's wrong.

0 2
0 765
Question
Larry Pinsky · Feb 6, 2020
Opening Files Within A BPL

I have two files that I ultimately need to combine.  The first file contains data from a PO.  The second file contains tracking information.  What I thought about doing was create a BS that grabs the first file, loads it into a record map and transfers it to a BPL.  Then, the BPL would open the second file where I would write code to load the file into a second record map and then insert the tracking information to the correct places in the first file based on PO line items.

0 3
1 178

I am working on a BPL to take data from a MS SQL database and create an HL7 Materials Message for our EMR.  I have done this plenty of times in the past however I am running into an error.

"Remote Gateway Error: JDBC Gateway SP execute(0) error 0: Access to the remote server is denied because no login-mapping exists."

What is confusing is that this BPL doesn't differ from any of my other BPLs in connecting to MS SQL Server. I know I am missing something..

0 3
0 345