#Business Operation

Trying my first REST call operation to our internal EMR (Epic) server, and I am receiving "ERROR #6097: Error '<READ>Read+28^%Net.HttpRequest.1' while using TCP/IP device '9999'" when I attempt to test my operation. When I look up the General Error Messages for 6097 I am seeing...Error '%1' while using TCP/IP device $zu(189,1)='%2'. What does this mean? 

I am trying to connect to the server over port 443 which is HTTPS but I am not using an SSL Configuration. Could that be the issue? 

Is there a way to debug HTTP like their is with the ISCSOAP log?

Hi ,

Still a newbie for ensemble, I am trying to convert XML message to HL7 Message. I am using Custom schema for XML structure which includes MSH and PID segments from HL7 Message.

These are the service, process, Operation classes i am using 

Business service-EnsLib.EDI.XML.Service.FileService

Business Process-EnsLib.MsgRouter.RoutingEngine

Business operation -EnsLib.HL7.Operation.FileOperation

I am using data transformation to convert XML message to HL7 message  and data transformation is working fine and im getting this in the business operation.

Hi Community,

I need to convert HL7 Message into FHIR Format.Can anyone share basic reference for FHIR ADT^A01 message?

For converting HL7 message to FHIR we need to convert HL7 to SDA3 format and then converting SDA3 to FHIR format.

Please Share few basics steps for converting SDA3 to FHIR message?

Thanks

Smythee

First time setting up a SSL/TLS connection, and I am running into issues when I call it from within a Business Operation. I used openssl to generate a RSA 4096  SHA512 key/csr request for our Active Directory Certificate Service to generate a Certificate Chain for me to use within RedHat. I was 
able to connect to our Web Service server using a generic request from terminal, however when I try it from our Business Operation I am running into issues.

I tested the SSL/TLS connection using the following commands from the terminal.

DEVCLIN>set request=##class(%Net.

Hi All,

When resending HL7 messages out, the receiving system rejects the message indicating the "Message Control ID already exists" (see error below). Iris retries resending the same message until the receiving system crashes and the BO disconnects in Iris. I would like to suspend the message when Iris receives that error and move on to the next message. Is this possible? Can it be handled by the BO Reply Code Actions settings? What reply code actions should I use? 

The error comes back when using the default Reply Code Actions ':?R=RF,:?E=S,:~=S,:?A=C,:*=S,:I?=W,:T?

Hi everyone, 

I'm working on a Business Operation whit an HTTP Outbound Adapter and I would like to know if is possible to adjust the FailureTimeout value based on the incoming message type. For example, I would like to have a FailureTimeout of 60 seconds for the standard operations and a FailureTimeout of -1 (wait forever) for few special operations that absolutely need a response. 

Can we dynamically modify the FailureTimeout through code, based on either the incoming message type or a specified parameter?n the incoming message type or depending by a parameter?

For example, something like: 

If 

I am using the %Net.HttpRequest class to download a file from the internet .using the following code. When a file is returned in the DOM I am able to read the file content and save it to the desired location but when my response is a download dialog nothing is returned in the HttpResponse. Am I doing something wrong here is where I have gotten to so far any help appreciated.

current code

Set httpRequest = ##class(%Net.HttpRequest).%New() Set httpRequest.Server = "msedgedriver.azureedge.net"
set httpRequest.Port=443
Set httpRequest.ContentType = "application/octet-stream"
Do httpRequest.Get("/113.

Hello everyone,

I'm currently working on a business operation that employs a retry mechanism with a FailureTimeout = -1. So, this BO attempts to resend the message at the end of a RetryInterval of n seconds (n is configurable).

What I would like to achieve is to set a timer that runs in parallel with the sending mechanism so that, If I don't receive a response within m seconds (m also is configurable and m<=n) from the initial message send (with RetryCount = 1), an alert or something similar is triggered.

Pointers please for debugging a SOAP web-client.

We have several clients in different productions all accessing a web-service. We are trying to add another client in a new production, and its not working. The messages between the relevant Process and the SOAP web-client Operation are the same in the working and the non-working productions. But the web-service is reporting an XML parsing error to the non-working production. Here's the error as reported in the SOAP web-client Operation...

Is there any way to see the output of the web-client Operation

I am running into an error trying to send an Alert Email to test the functionality of IRIS HealthShare Health Connect  2022.1 compared to Cache HealthShare Health Connect 2018.1.3. I was trying to send an Alert email, when I am getting the following error on my EMailAlert operation which is using EnsLib.EMail.OutboundAdpater.

I verified the message to the EMailAlert was populated, so what could be throwing this error...

Hi Community,

I am working on sending Gmail with error details when any errors occurs in the ensemble production.

I am facing the below issues while doing it

1.I have Ens.Alert (Business process) using the class Ens.Alerting.AlertManager and Emailoperation (Business operation) using the class EnsLib.EMail.AlertOperation. here my business process is not sending the Alarm request to business operation eventhough i am using rule to connect the business operation 

2.What are SMTP server details needs to given for Gmail?

Please let me know how to resolve these issues

Thanks,
Smythee

Hi Community,

I am trying to save data into SQL table but each entry  getting saved twice in the SQL table. Is there any reason data is saving Twice in the SQL table 

I have created a %Persistent class for the fields

Please find the business operation below

Class Patient.DBOperation Extends Ens.BusinessOperation

{

Parameter ADAPTER = "EnsLib.SQL.OutboundAdapter";

Property Adapter As EnsLib.SQL.OutboundAdapter;

Parameter INVOCATION = "Queue";

Method OnMessage(pInput As Patient.PatientDBReq, pOutput As Ens.Response) As %Status
{
    Set Entry=##class(Patient.PatientDBReq).%New()
    Set Entry.

Hi Team, 

Is there any way to disable all operation ( or services) in a production entirely? 

For example when restoring from one HealthShare environment to another we may need to get the configs (IP, port, ssl etc ) updated before staring the operation. We set the production autostart to disabled but still need to disable the operation one by one if we want to start production without operations enabled.  

Thank you for your help. 

Trying to pass pdf to save to custom file  using default Trying to pass pdf to save to custom file  and %f. but oriignal filename didn't send (it does in terminal). What is missing from setting filename from stream? can the file passthrough not out of box use outputfilename or has wrong default one been sent. 

set fname="ThisHasBeenChanged.pdf"
Set test = ##class(File.EpacsPDF).%OpenId(1)
set tempStream=##Class(%Stream.FileCharacter).%New()
Set sendstream = ##Class(Ens.StreamContainer).%New()
 
set sendstream.OriginalFilename=fname
set sendstream.

Hi everyone, 

My problem today is how to send an HTTP message to a web service deployed via Render and gunicorn. 

Issue

Every time I try to contact the web service I get an error. Searching on the web, I've found this StackOverflow question that suggests the issue could be set off from a missing "/" character in the endpoint string.

I've tried in many ways, both including and excluding the final slash character, but I always get an error:

1. When using a URL without the final slash (e.g., https://<renderProjectName>.onrender.com), the message is successfully sent but I get the error HTTP/1.

I had attempted to create a REST Operation before but did not have success. As I am going through the Tutorials and Documentation everything references REST services, but I have a case where I want to create a REST Operation that makes Epic API calls against Interconnect. I have done SOAP operations before and we currently have one in our Production Namespace, but from what I understand SOAP has the wsdl which defines al the structures and etc, where REST does not. 

So how does one go about creating a REST Operation if Learning Tutorials and Documentation always talks about REST services?

Hello everyone!
So, I am supposed to receive a REST-request into my production, and I need to send it, exactly as I received it, to another server.
I am struggling to find any good info on this, and have a hard time coming up with a good approach.
What would be the easiest way to do this?
- I have so far thought about possibly doing it with an EnsLib.REST.GenericService and then sending it with an EnsLib.REST.GenericOperation.
- I have also thought about manually creating a rest-service and somehow using %request and sending it directly if that would be possible.

I am trying to figure out how to loop through the EnsLib.LDAP.Message.Results to get all the attributes. From router I am passing EnsLib.LDAP.Messge.Search as the request param. Response is  EnsLib.LDAP.Message.Results. I am invoking the EnsLib.LDAP.Messge.Search BO.

At the BP level, trying to figure out how to extract all the attributes for a EnsLib.LDAP.Message.results

I am trying to use EnsLib.SQL.Operation.GenericOperation for retrieving (multiple) rows. But I am looking for a way to handing a StreamContainer returned by the operation, in my business process such as receiving it in the Context object and packing it to a request to call another business operation.

Does anyone have sample code to do this?

Thanks.

I have a question about using OnInit() within a Ens.BusinessOperation.

When you include OnInit(), does OnInit() only execute when you start a Business Operation? Or does it execute OnInit () every time you send a REST request to the operation. I am trying to pinpoint when the best time is to execute the POST command to get the Token

I am needing to get a Bearer Token from a REST POST call and return the Authorization key prior to making the rest of the REST calls to pull down data.

When not using OAuth, what have you done to get the Token prior to executing any Requests?

Thanks

Scott

Ran into an issue this morning, that I am having a hard time trying to track down what might have caused the issue. We have a Business Rule that sends HL7 ADT to a Business Process that inserts the data into a MS SQL Server using a Custom Business Operation (SQL Outbound Adapter).

Early yesterday morning the Custom Business Operation reset its connection through the Java Gateway Server to the MS SQL Database, when it reconnected to the Java Gateway/MS SQL Database it stopped processing. So, the Business Rule had over 40,000 queued up to process.

Dear Community, 

Is there any way to search , select and abort a specific set of messages from a large queue in Healthshare business operation? 

Thank you for your help

I have an operation using $ZF this operation ran and did not error but the job has been active and it can not be stopped I have tried stopping it from the front end and through the terminal using ##class(ENSLIB.Job).%New() Stop method. Now my production will not update even if I add a new item to the production I cannot update the item is there a way to force stop  this job.

We are writing a custom Business Operation to interact with a downstream SOAP web-service. Classes for the SOAP operation were originally generated using the SOAP Wizard, then modified. This is functioning OK, but we'd now like to set the ReplyCodeActions setting on the operation and are struggling to make it visible via the management portal. How can we achieve this?

The classes are structured like this:

• The Operation uses class TNHS.SOAPclassExtra
• TNHS.SOAPclassExtra  Extends TNHS.SOAPclass
• TNHS.SOAPclass  Extends Ens.BusinessOperation
• Ens.

What is the recommended library for converting documents to pdf. Any suggestions welcome has anyone out there had a use case where they had to convert documents to pdf .What worked for them .I have asked WRC for the best practice and they have recommended that may be  a sale engineer might have an answer to this .

How can i modify file extention on output file leaving Busness Operation

Ex..changing "output.txt" to "output.hl7"

How to call multiple SQL gateway connections in BO

Hi all,

I'm wondering if it is possible to call a Business Operation from other Business Operation.

I have a BO that writes logs into a database, using a personal message. I can create a set obj=##class(MyLogs).%New() but the BO has all parameters about connection.

Is it possible?

Best regards.

In the Business Operation, how do we get to know which source is currently sending primary request if there are multiple requests coming at the same time?

Hello all,

On one of my team's systems, we utilize a business operation with the EnsLib.SQL.OutboundAdapter to make SQL queries to another IRIS system using JDBC. To authenticate the connection, we utilize a user account on the target system.

We recently had a failure where this user account expired due to inactivity, causing all queries to error until the account was reactivated on the target system.